Turkish Industry, Science and Technology

[Worf]

It must be a mistake. A jet fighter must be developed before it is 'constructed'.

 

[damm1t]

in a project called 'A Turk in the sky' that he had presented last week.'

that motto refers to TRJ628.

 

[bsruzm]

that motto refers to TRJ628.

Whateverlol

 

[Mert_Ank]

MILRES Project to develop 2,5 MW industrial capacity wind turbines • 500 kW scale prototype turbine will be developed first.
These turbines will be used as test beds to mature system design for applications in a 2.5 MW industrial capacity wind turbine.
Provide experience and ability for further development of 5MW-8MW offshore wind turbines in Turkey


Developed Turkey’s first; • 500kW double fed indicator generator
500kW wind turbine gearbox
forged shaft for 900mm diameter
forged ring flanges upto 3.5m diameter
Novel gear box design that allows stage by stage ( 3 stages) servicing
unique turbine blades
Unique aerodynamic and structural design,
Unique mold design
90% domestic materials (including fiber)

Some Novel Aspects of MILRES Turbine
Hybrid/Midspeed turbine design;
Gearbox output ratio is lower than standart wind turbines
Generator is smaller and cheaper than direct drive wind turbines
Full load wind speed is lower than competitors, which means more energy in lower wind speeds
On board (nacelle mounted) crane system for maintenance. This crane system has ability to service all nacelle systems. Some Special Aspects of MİLRES Turbine

I\ll add some pics later

 

[-------]

MILRES Project to develop 2,5 MW industrial capacity wind turbines • 500 kW scale prototype turbine will be developed first.
These turbines will be used as test beds to mature system design for applications in a 2.5 MW industrial capacity wind turbine.
Provide experience and ability for further development of 5MW-8MW offshore wind turbines in Turkey


Developed Turkey’s first; • 500kW double fed indicator generator
500kW wind turbine gearbox
forged shaft for 900mm diameter
forged ring flanges upto 3.5m diameter
Novel gear box design that allows stage by stage ( 3 stages) servicing
unique turbine blades
Unique aerodynamic and structural design,
Unique mold design
90% domestic materials (including fiber)

Some Novel Aspects of MILRES Turbine
Hybrid/Midspeed turbine design;
Gearbox output ratio is lower than standart wind turbines
Generator is smaller and cheaper than direct drive wind turbines
Full load wind speed is lower than competitors, which means more energy in lower wind speeds
On board (nacelle mounted) crane system for maintenance. This crane system has ability to service all nacelle systems. Some Special Aspects of MİLRES Turbine

I\ll add some pics later

View attachment 226970

View attachment 226971

View attachment 226972

Oh yes, I forgot about this project entirely! It's good to see they kept to the project deadline

TAI producing the blades

Some Tubitak Projects

 

[Inspector Spacetime]

Oh yes, I forgot about this project entirely! It's good to see they kept to the project deadline

TAI producing the blades

Some Tubitak Projects

@Mert_Ank @Combat-Master
When is the project deadline? And when can we expect these turbine's to be active? And when are these expected to installed in the field and sea?

 

[Mert_Ank]

@Mert_Ank @Combat-Master
When is the project deadline? And when can we expect these turbine's to be active? And when are these expected to installed in the field and sea?

500kW will start producing electricity end of this month. 2.5 MW design is ongoing there is no date yet

 

[Mert_Ank]

E1000 1MW power Electric locomotive

it will be used as short distance freight train. The knowledge and technology developed for this project will be leveraged for high speed national train.

So far

AC traction motor converter
AC traction motor control unit
Central control unit
Related software development
locomotive dynamic modeling

knowledge gained and developed its in testing phase now

 

[Mert_Ank]

TRIJEN R&D Project

Objective: Convert low grade coal and biomass into diesel fuel

Technology developed;

• Coal and biomass gasification technologies,
• Gas cleaning technologies,
• Gas conditioning technologies,
• CO 2 separation technologies,
• The conversion of synthesis gas into liquid fuel systems,
• Use of the power production system of the synthesis gas

Pilot plant is under construction in Soma
Fischer-Tropsch method will be used and will have 25 lt / hr capacity.

 

[-SINAN-]

Ermaksan founded the first Chip factory of the Turkey. Serial production will start at the end of the 2015.

'Çip'te seri üretimin ilk adımını Ermaksan attı haberi www.dunya.com'da

 

[Kamil_baku]

Ermaksan founded the first Chip factory of the Turkey. Serial production will start at the end of the 2015.

'Çip'te seri üretimin ilk adımını Ermaksan attı haberi www.dunya.com'da

how many countries in the world can produce chips? any idea? Recently, USA banned the export of chips to CHine, does that mean that they cant produce it?

 

[-SINAN-]

how many countries in the world can produce chips? any idea? Recently, USA banned the export of chips to CHine, does that mean that they cant produce it?

Dunno bro.... @cabatli_53 know much more about this stuff.

 

[FutureMe]

how many countries in the world can produce chips? any idea? Recently, USA banned the export of chips to CHine, does that mean that they cant produce it?

Probably a couple dozen countries produce low processing power chips. However high power chips like the ones used in Computer CPUs, graphic cards; digital cameras; mobile phones and other compute dense applications are the domain of several countries. Mainly; USA, Japan, Korea, China, Taiwan have foundries that actually produce the physical products. But there are other countries like Russia that can design the chips but doesn't have the latest chipmaking technologies to produce them. Also the chipmaking countries or rather companies have some of their facilities outside their country of origin. Like Intel has a foundry in Israel.

Semiconductor sales leaders by year - Wikipedia, the free encyclopedia

 

[Bubblegum Crisis]

Probably a couple dozen countries produce low processing power chips. However high power chips like the ones used in Computer CPUs, graphic cards; digital cameras; mobile phones and other compute dense applications are the domain of several countries. Mainly; USA, Japan, Korea, China, Taiwan have foundries that actually produce the physical products. But there are other countries like Russia that can design the chips but doesn't have the latest chipmaking technologies to produce them. Also the chipmaking countries or rather companies have some of their facilities outside their country of origin. Like Intel has a foundry in Israel.

Semiconductor sales leaders by year - Wikipedia, the free encyclopedia

UAE : Traditions are changing. We are going from sand to silicon.




...

 

[-------]

Lie detector machine designed especially for Turks being developed - SCIENCE & TECHNOLOGY

A polygraph machine adapted for Turkish culture is currently under development at Istanbul’s Üskudar University.

“That which can be considered a ‘lie’ by regular polygraphs used in the West may not be considered a lie by Turkish people. Cultural differences must be taken into account in the detection of what is a lie and what is not,” Professor Nevzat Tarhan, in charge of the project, told the Hürriyet Daily News.