What's new

JF-17/FC-1 Thunder Fighter

Status
Not open for further replies.
Anyone know's that how many JF-17 thunder have pakistan ??
 
. .
PAF seeks more JF-17 fighters
23-Mar-2007

got this from janes, dont have a subscription so this is all i can read.

The Pakistan Air Force (PAF) aims to acquire 200-250 JF-17 Thunder (FC-1) fighter aircraft in place of the 150 originally envisaged, the country's air force

http://jdw.janes.com/public/jdw/index.shtml
 
.
Well the question is.....Which variant are they planning more of?
 
.
Webmaster wrote today that Pakistan is on number 3 in missile technology after testing CM Babur. Can anyone tell me how, when still it has no air to air missile , no long range SAM missile (15-30km) and no ABM & no RADAR technology developments and there are no news if any R & D going on to develop these. So how come it came on number 3.
Is there any one to reply and clear the doubts

wrong thread.........

And since there is a facetious note to your post I would say this. The article (not webby) refers to surface to surface missiles, not missiles overall.
 
.
They already have those items. Either bought or developed/copied. They have range of weapons we still have no clue how they look like... We have been talking about H2 and H4 for years. Ever seen one? Thought so. You might find it intresting that Magic was that well copied that French could not see the difference... Anyway. They did move away and even developed Babur. It is far more difficult to produce CM then an a2a... We should remind that they have shown that they can do things faster and better with less cash. Just compare programs on amry, navy or airforce level. You might wonder how they can do it better then India... It is because they are familiar with the same situation as Israel. They have to do better... Sofar they did.
 
.
Hi,

All the pahntoms used to have a huge smoke trail.

Manufacturing part of engineering reflects your character and frame of mind. Your end product is truly the reflection of your personality and character. Why is a toyota different than a chevy impala or why is a mercedez different than cadillac!

Pakistani millitary establishment and other related departments had to dig deeper into their resourcefulness and soul to produce better weapons under the given conditions of sanctions and indian aggression. India, on the other hand, didnot have to worry about that at all. What ever they wanted, was just a phone call away from moscow. Because of that, india never really had the urgency or the need to manufacture a quality product in ashort time on their own.

Now they have a problem. Suddenly, out of nowhere, they are looking at this cruise missile that the pakistanis have produced, all thanks to our friends in north america. The indians cannot make heads or tail of the fact if pakistan has already started its production, if it has been allocated to the millitary, what it can do and what it cannot do. They cannot believe that it is possible for pakistan to have babur cruise missile in a working condition that would meet the needs of the army in such a short time. They cannot believe that because their own systems that they have been working on, have a very high rate of failure or a very long test and production period and they assume the same would be the case with pakistan. But then all of you guys know, what happens when you assume-----you make an ***---out of u &--.

Then there was the flight of the JF 17's over the weekend. Indian defence establishment is totally flabbergasted over the events of this week. Even though they retaliated with their brahmos. The indian memebrs are blowing steam all over the defence boards asking for links to where the pakistani missile babur program is heading--and the Jf 17 too--links---links----links. Damned if you don't have the link.
 
.
They'll even ask for a link of anyone going to the bathroom ;) so don't worry, we are headed in a successful path and thinking long term, I tend to get a headache talking to them, just try to avoid them.

Funny thing you mentioned the cruise missile, now on some forums they are asking for links of how did Pakistan get TERCOM maps (like Pakistan is going to tell anyone, they ask everytime, if you don't provide link they think it's not their)! :D You will be surprised what these people can pull out.
 
.
They'll even ask for a link of anyone going to the bathroom ;) so don't worry, we are headed in a successful path and thinking long term, I tend to get a headache talking to them, just try to avoid them.

Funny thing you mentioned the cruise missile, now on some forums they are asking for links of how did Pakistan get TERCOM maps (like Pakistan is going to tell anyone, they ask everytime, if you don't provide link they think it's not their)! :D You will be surprised what these people can pull out.

As I stated it is fairly easy to figure out. There was a Tomahawk that crashed (intact) when the U.S. was attacking Afghanistan. Reverse engineering!
 
.
As I stated it is fairly easy to figure out. There was a Tomahawk that crashed (intact) when the U.S. was attacking Afghanistan. Reverse engineering!

I know, but on sites like IDF, etc they still want proof, is what I'm trying to say. :lol:
 
.
I know, but on sites like IDF, etc they still want proof, is what I'm trying to say. :lol:

Well tell them the magic elves gave it to them......:lol: Ask them for proof that the missiles on Indian planes are not tubes full of chocolate....:rofl:
 
.
Mastan Khan, Pakistan has no R&D or manufacturing base. Only thing it is good at is missiles, and even that is courtesy China.
Dont bother comparing stuff, cuz mostly machines like Arjun, LCA were meant to be made in India, and they have. It has evolved a hgue design and manufacturing base in India, Pakistan has none in comparison.

JF-17 is Chinese as is AlKhalid.
 
.
Mastan Khan, Pakistan has no R&D or manufacturing base. Only thing it is good at is missiles, and even that is courtesy China.

Learn about Pakistans Industrial base, before opening your tramp.

Dont bother comparing stuff, cuz mostly machines like Arjun, LCA were meant to be made in India, and they have. It has evolved a hgue design and manufacturing base in India, Pakistan has none in comparison.

Oh, Yes, and your guns that broke down during Nepals fight with milita's, India's products are truly made for India, just like Arjun and LCA.

Let me show you some of the things we make in PAKISTAN, you should also see Pakistans contribution on display at IDEA '06.

Also, we make our own Talha APC, Command post Carrier, Logistics vehicle, etc. More UAVs then posted here, our own small arms, we make our own bombs besides the ones we can make with license, in a video interview our men even said, we sell them to Arab countries besides the cluster bombs we make cause of international issues, etc. Hell, we are sufficient in our own ways, tell me this how many projects have we had that failed compared to India? We might now make everything but were advancing are a nice and steady pace, hell we can copy what matters is we have it! We have our own software research and development at AQ Khan Laboratory, I will provide a link about our companies and you can see for yourself.

http://pakdef.info/pakmilitary/army/index.html

Pakistan Arms Industry
Armament Research & Development Establishment
Rawalpindi, Pakistan


Armament Research & Development Establishment (ARDE), since its inception in 1974 has been undertaking research and development in the field of arms and ammunitions and has contributed significantly in establishing development and production base through collaboration with public and private sectors. Major accomplishments of ARDE are weapons and tank ammunition.

Defence Science & Technology Organization

Rawalpindi, Pakistan

The Defence Science & Technology Organization (DESTO) is the premier defence Research and Development organization of Defence Production Division, Ministry of Defence, Government of Pakistan. DESTO conducts research and development around weapons and weapon systems and renders professional advice on the application of science and technology.

DESTO’s research and development environment covers a wide spectrum of fields, under the broad disciplines of aerodynamics, propulsion, defence electronics, computer systems, engineering, propellants, explosives, materials and chemical & biological defence etc. Besides providing scientific and technical support to other research & development as well as production establishments of Ministry of Defence, DESTO’s multi-disciplinary infrastructure and technology base is available to public sector industry under commercial arrangements.

While the DESTO Headquarters are located at Chaklala for providing policy advice, liaison and organizational management, DESTO’s R&D infrastructure is located at the following different physical locations:

# DESTO Laboratories Complex, Chattar
# DESTO Laboratories, Karachi
# DESTO Laboratories, Chaklala

Institute of Optronics
Ministry of Defence, Chaklala-Rawalpindi, Pakistan

Institute of Optronics (IOP) has established state-of-the-art military specifications production and testing facilities of night vision devices, based on Image Intensifier Tubes. The Night Vision Systems, without turning the night into day, vastly improve the ability of the Armed Forces to undertake a number of vital functions related to force effectiveness. Command and control, surveillance, movements both tactical and logistical and accuracy of firepower are some of the areas of activities in which the Night Vision Devices are playing a formidable and vital role.

Institute of Optronics is playing a key role in this field and has established Military Specifications production and testing facilities of following night vision devices, based on second generation Image Intensifier Tubes:

# Individual Served Night Vision Weapon Sight (Equivalent to AN / PVS - 4A)
# Crew Served Night Vision Weapon Sight (Equivalent to AN / TVS - 5A)
# High Performance Night Vision Goggles (Equivalent to AN / PVS - 5C)
# High Performance Night Vision Binoculars (Equivalent to NVB - 4A and NVB - 5A)
# Driver’s Night Vision Periscope (DNVP - 1A)
# Aviator’s Night Vision Goggle

An indigenization programme to progressively develop and manufacture components in Pakistan for night vision systems is being vigorously pursued. The future plans of this institute include the establishment of facilities for night vision devices based on Thermal Imaging Techniques for all types of armoured vehicles and helicopters.

Besides meeting the night vision requirements of the Armed Forces of Pakistan, this institute has exported these to friendly countries.

Karachi Shipyard & Engineering Works Ltd.
Karachi, Pakistan

KSEW is ISO - 9002 Certified for Shipbuilding, Submarine & Warship Construction and General Engineering Works. The present services are:

# Shipbuilding of all types of vessels and craft of upto 26,000 TDW
# Small submarines and warship / support craft like Missile Craft, Patrol Craft, Diving Boats, Towed Array Barge, Floating Docks, Berthing / Pusher Tugs, Oil / Water carriers, boats etc.
# Underwater repairs of ships of upto 26,000 TDW and above water repairs to any type or size
# Wide variety of engineering plants and machinery like tankages, pressure vessels, LPG storage tanks, overhead, luffing and other types of electrically operated cranes, equipment of oil, gas, petrochemical industries, steel structures for dams, barrages, thermal power plants and similar other industrial plants, components for cement mills, complete sugar plants, Firetube boilers, watertube boilers etc.
# Iron castings of upto 15 tons a piece, steel castings of upto 3 tons a piece and non-ferrous / alloy castings of upto 750 kg a piece
# Physical, chemical, metallographic and non-destructive testing of various raw materials, components etc. Testing according to requirements of ISO - 9000 and international classification societies standards also undertaken

Margalla Electronics
Islamabad, Pakistan

Margalla Electronics (ME) was created in 1984 as a self reliance project under the Defence Production Division to support the Defence Services in the field of electronics. The support includes:

# Repair and rebuild of electronic equipment used by the services
# Applied research to improve equipment performance and reliability
# Original design and production

Within a short span of time ME has accumulated sophisticated skills and hardware necessary for assembling, testing, and repairing of various types of military electronics products. ME has co-produced and fielded sophisticated state-of-the-art radar systems and communications equipment jointly with various international companies.

Military Vehicles Research And Development Establishment
Rawalpindi, Pakistan

Military Vehicles Research and Development Establishment’s (MVRDE) creation in 1972 owes itself to the national resolve to explore and build upon our indigenous technical and industrial potential. MVRDE is thus fully involved in mobilizing, orientating and developing our public and private industrial sector to achieve progressive self-reliance in defence equipment.

MVRDE is a multi-disciplinary organization capable of conducting research and development pertaining to military vehicles, engineers equipment and defence-related mechanical systems. Its infrastructure encompasses a wide spectrum of facilities under following broad categories:

# R & D Sections
# To carry out design, development and product up gradation in following categories:
# Armoured Vehicles - Tanks, APCs, ARVs
# Wheeled Vehicles - GS and special Purpose
# Engineers Equipment - Earthmoving machinery, Cranes etc.

National Development Complex
Islamabad, Pakistan

National Development Complex (NDC) was created with an objective of developing an infrastructure for indigenous weapons development, provision of technical services, and achieving self-reliance in diverse technologies related to these areas. NDC is delivering reliable and state-of-the-art weapon systems and military hardware at competitive prices. Since its creation, NDC has made remarkable progress in developing and producing a diverse range of defence products.

Pakistan Aeronautical Complex
Kamra District Attock, Pakistan

The conception of idea to establish Pakistan Aeronautical Complex dates back to the early seventies. The rationale behind this idea was both economic and strategic. The aim before the policy makers was to create an indigenous production facility in which aircraft and engines could be overhauled and repaired without sending them abroad and doling out large sums of foreign exchange. Later years saw expansion in the role of PAC in terms of aircraft and engines production, upgrade programmes and joint ventures.

Since inauguration of the first of its four factories in 1978, Pakistan Aeronautical Complex has not looked back. In the two decades, it has vastly expanded the scope of work, commenced new and more challenging projects, created a veritable centre of excellence in military aviation and information technology, and above all, realised the original goal of self-reliance. Eversince its inception, Pakistan Aeronautical Complex has become the backbone of Pakistan Air Force in maintenance; supporting its major weapon systems by providing rebuild services for aircraft, engines and components; providing spare support, structural repairs and major rectification. Manufacture of Mushshak aircraft and collobaration with China in K-8 jet trainer programme are landmark achievements of PAC which have lent tremendous creditability to this industry. More recently PAC has also ventured into the area of system upgrades and manufacture of airborne avionics systems in partnership with some foreign collobarations. Having acquired necessary resources and expertise. PAC is fast expanding its role and making all-out efforts to turn itself into a self-supporting outfit. Already, it is ensuring that the country spends least amount of foreign exchange on maintenance of the PAF fleet of fighter and trainer aircraft. Except for import of certain essential spares, rest everything is produced or repaired locally.

In PAC, quality of products and services occupies the fundamental importance. Quality received tremendous boost recently when the four factories of this complex were certified to ISO-9000 quality management system by the leading international auditing firms. This has enormously enhanced the prestige and the credentials of this complex with the aviation circles around the world. They now consider us serious contenders for joint ventures and partnerships. With this, PAC is now committed to a standard which can neither be lowered nor compromised in future.

Pakistan Navy Dockyard

Karachi, Pakistan

PN Dockyard since its inception in 1952 has been undertaking repair works, modernization and rebuild of PN Ships, Submarines and Crafts. Pakistan Navy Dockyard is providing technical assistance, rebuild and repair of a wide range and diversity of equipment of PN Fleet and has undertaken fleet modernization and up gradation programmes with success. PN Dockyard has developed capability to undertake ambitious and indigenous construction projects like Missiles Boats, Mines Counter Measure Vessel (MCMV) and AGOSTA 90 - B Submarine.

Pakistan Ordnance Factories (POF)

Wah Cantonnement, Pakistan

During the Second World War, British used the sub-continent as a spring-board and a logistics base to conduct its campaigns in the Eastern Theatre. Towards this end they developed massive logistics infrastructure, including sixteen Ordnance Factories.

In 1947 at the time of independence, Pakistan could not get even a single Ordnance Factory. First Prime Minister conceived a Plan in December 1947 and decided to establish an Ordnance Factory. The second Prime Minister inaugurated Civil Works for four Factories at Wah in December 1951, 36 kilometers north of present Federal Capital Islamabad.

During Wars of 1965 & 1971 un-justified and unilateral arms embargo jolted Pakistan and serious thought was given to self-reliance.

POF of the late fifties was producing .303 Rifle, its ammunition, 25 Pounder Artillery ammunition, 40 mm Anti Aircraft ammunition, M36 hand grenade, 2”and 3” Mortar Bombs and 500 lbs and 750 lbs Aircraft Bombs.

It was a turning point in the history of POF as it went through modernization and expansion over the next two and half decades. Today POF is a gigantic industrial complex with fourteen factories and eight subsidiaries employing a total work force of over 33,000.

Dr A Q Khan Research Laboratories
Rawalpindi, Pakistan

Al - Technique Corporation of Pakistan (pvt) Ltd

Islamabad, Pakistan

Established in 1986, Al Technique Corporation of Pakistan, (ATCOP) has quickly established itself as Pakistan’s premier organization in the field of LASERs and modern optics. Situated some 20 Km outside Islamabad in the picturesque Potohar plateau, its Electro Optics Division has pioneered the growth of LASER sciences and electronics technology in the country.

With a work space of 7500 sq. m. and a staff of nearly 400 highly trained personnel (with over 70 engineers and scientists), ATCOP has set up a broad array of technical facilities and expertise making it one of the most integrated facility in the country. It is self - sustaining in the five major technical areas of:

# LASER and Optics
# Design of Components / Complete Systems
# Measurement & Evaluation
# Electronics
# Mechanics
# Testing

ATCOP is therefore engaged in R & D and production of electro optics and LASER systems as well as in V / UHF communication, with nearly 30% of its annual turnover of US$ 5.0 million being spent on R & D or collaboration with universities.

AL-Sons Industries (PVT) LTD
Karachi, Pakistan

Alsons is the pioneer precision engineering private industry that was set up Pakistan in 1953. Its first product was Clocks. Progressive innovations and high tech tooling enabled Alsons to manufacture specialized engineering high tech products. Alsons Group has three factories of which two are in Karachi and one is in Islamabad.

Following are the three companies under Alsons Group management :
Alsons Industries (Pvt.) Ltd.
Defence Products

Alsons Auto Parts (Pvt.) Ltd.
Automotive Products

Two Feeder Units
Plastic Injection Molding and Precision Machining Parts

Since 1968, Alsons is engaged in manufacturing of highly precision engineering products for Armed Forces of Pakistan. The modern and fully integrated manufacturing plant, with built-up area of 10,000 sq. meters and 450 employees, is equipped with most advanced CNC turning centers provides an wide range of production and assembly technology. It has its own R & D.

Al Mustafa Engineers
Lahore, Pakistan

Pakistan Aeronautical Complex (PAC)

Aircraft Manufacturing Factory, Kamra District Attock

Heavy Industries Taxila (HIT)

APC Factory, Taxila Cantt

Machinecrafts (Private) Limited

Lahore, Pakistan

Alsons Industries (Pvt) Ltd

Karachi, Pakistan

Military Vehicle Research and Development Establishment

Alsons Industries (Pvt) Ltd

Karachi, Pakistan

Service Industries Limited

Lahore, Pakistan

Daudsons Armoury
Peshawar, Pakistan

So, as you can see Pakistan has the capability to do it's own R&D (and be successful unlike our neighbor), AK and JF-17 isn't just made by China also Pakistan, we have enough brains to deal with this, hell we even took stingers and wired them to Chinese planes during war time '71.

Here we have facilities to over haul our own tanks, and make any upgrades we want right at home, etc. Heck go on PakDef.info with all the info of our industry instead of making bogus claims.

http://pakdef.info/pakmilitary/army/index.html

We make our own small arms fire and we have our own rife we made (POF) PK-8, just go their and check it out yourself, at least our guns and ammo don't fail us and cost lives. At POF we can make alot more ammunitions to supply the Air Force and ground forces, etc.

Courtesy of Pakdef.info (E-Report on Idea '06 can be found on homepage)



Karachi based firm: The MSL (Marine Systems Limited) Maritime Training Simulator displayed at IDEAS2006. The unit can simulate any maritime sensor under any conditions cutting the strain on surface, subsurface and air platforms.



The operational Display Console produced by MSL. As Pakistan moves to indigenise ship production to the fullest extent possible consoles like this (along with the software) produced in Pakistan will make it possible.



The Saad APC underway during the mobility display at IDEAS2006. The Saad was produced by HIT and due to its high power to weight ratio and top speed will equip those units that will work hand in hand with the more agile Al-Khalid and T-80/T-84UD MBTs.



Al-Zarrar the laser sights are made by the company listed below.
Al Technique Corporation of Pakistan (ATCOP)

Also, know the battle management system on the AL and AZ are made in Pakistan, with their own software expertise with collaboration with the above company.



The HIT Discreet Armoured Vehicle (DAV) at the outdoor display IDEAS2006. Ther DAV is claimed to be the world's first armoured vehicle on so light a car with previous armoured vehicles being built around larger cars.

http://pakdef.info/pakmilitary/ideas2006/thumbs/IMGP0861.JPG

MVRDE's Dragon EMP uses two sets of ploughs the tines of which dig out buried mines and roll them away from the tank. A roller assembly is fitted to the rear to deal with anti-personnel mines in the ploughed area. Dragon is typically mounted on a T-55 chassis



MVRDE's TAM is mounted on a T55 chassis. The clearing rollers can withstand up 12 anti-tank blasts and sweeps two 90cm lanes at up to 12kmh. The assembly is controlled by the driver and the mechanism can be fitted or removed using the jib that is also fitted.

The Military Vehicle Research Defence Establishment, (MVRDE), has a come a long way since it was founded in the aftermath of the 1971 Indo-Pakistan war where sanctions had an adverse effect on the defence capabilities of Pakistani forces.



EWI's prototype micro tactical helicopter UAV. It is currently still undergoing development but is likely to be operatioanl in the near future. A small camera is fitted to record and relay images back thereby giving troops a tactical recon ability.



Albadeey's Hud Hud-3 is an enlarged version of the Hud Hud-2 with greater endurance (6hrs) and range (100km). It can carry a 40kg payload which is usually a high resolution CCD camera, GPS, and frequency modulated L Band video transmitter.

IDEAS 2006 Defence Exhibition

Usman Ansari reports on the biannual Pakistani defence show that was held in Karachi at the end of November 2006


http://pakdef.info/pakmilitary/ideas2006/index.html

The previous IDEAS defence shows have grown continuously in size and scope, and IDEAS2006, held in the financial powerhouse that is Pakistan’s coastal city of Karachi, continued that trend. With daily mobility displays of Pakistani Army vehicles, an impressive naval display, and culminating in one of Asia’s most impressive firepower displays, IDEAS2006 was a perfect opportunity to showcase the latest and best in local Pakistani security technology and military hardware.

In fact it can be claimed that IDEAS2006 grew significantly from previous exhibitions, and even after four days it was possible to have not had time to visit all the exhibitor’s stands. This is a reflection of the resounding success the exhibition was internationally as many globally renowned companies attended. The close ties with other countries such as Turkey were apparent with Turkish companies virtually booking one entire exhibition hall. The proud title above the door adequately displayed the sentiment, ‘Welcome to Turkey’. Turkish companies have shown their expertise in a number of areas and have demonstrated they can compete with more well known companies on the international stage. Aselsen, Roketsan, MJ Onuk, and TAI were all prominent exhibitors and surrounded by companies from the well-established Turkish small arms industry. As would be expected from companies from a country very close to Pakistan, a number of them have had significant success in winning contracts from Pakistan. TAI, which has done very well with the Turkish Air Force F-16 fleet, was named as the company that would handle the mid-life up-grade of the PAF F-16 fleet, in conjunction with Pakistan Aeronautical Complex (PAC), Kamra. TAI has significant expertise in this area having not only carried out this work but also assembled F-16s for the TAF. MJ Onuk on the other hand recently won an order from the PN of two of its MRTP-33 FAC for use with the SSG(N). These are formidable craft that combine speed with a deadly punch of four Harpoon anti-ship missiles. The company has had significant success at home producing craft for the Turkish security forces (not least the coastguard), who rely heavily on MJ Onuk vessels for the fast interception of suspect shipping in and around Turkish waters.

Lockheed Martin was also present and is a company that will be doing business with Pakistan for some time. Its principal product that was of interest during IDEAS2006 was of course the F-16, a significant order of which is a major plank of the PAF’s regeneration programme. The F-16C Block-52 will form the ‘tip’ of the spear when it is inducted into service bringing PAF strength and capabilities into line with other modern air-forces. Another aspect of this relationship is the ubiquitous P-3C Orion, and the PN is currently in the process of significantly boosting its number of this incredibly capable MPA, so as to have a greater capability to patrol the waters of the Arabian Sea and northern Indian Ocean in support of the WoT. In this regard Pakistan is an indispensable ally, and the work of the Pakistani armed forces has been essential in some of the success’ that have been had to date. The PN, as part of CTF-150, and in operations in territorial waters, is active in this endeavour every day of the year, and boosting the Orion fleet will allow Pakistan to increase the contribution it makes. One other area in which Lockheed Martin was hoping to boost Pakistani capabilities was the area of AEW. Lockheed Martin was clearly hoping to interest the PN in a P-3 fitted with the Hawkeye 2000 AEW system from what was displayed at its stand. This would be similar in appearance, but most likely superior in terms of performance, to the US Customs & Border Patrol Orion AEW aircraft that patrol the airspace around the American mainland. With the impending introduction of the Saab Eyrie AEW&C system into PAF service, there is a need for a similar system to monitor the airspace over the Pakistani littoral. The number of Eyrie systems on order is not sufficient in number to provide constant cover throughout a 24 hour period. Whether these efforts will bear fruit is uncertain, despite there being a clear need. However, Lockheed Martin was also offering ex-USN S-3 Viking aircraft for use in the maritime environment. It is unlikely that the PN will opt for such an aircraft (though there is speculation other South East Asian countries may) as it is being withdrawn for USN service in 2009, and there is no real requirement at present. If the PN is (as some analysts speculate) considering expanding the naval air arm to include fast strike jets in the long-term, it is likely these will be JF-17 or J/F-10 multi-role aircraft, and not a platform such as the Viking, despite its incredible capabilities. However, with Lockheed Martin assuring the aircraft will be supported throughout the life of the airframe, it is likely that a country in need of an aircraft for ASW will eventually opt for this impressive aircraft.

One other major American company present of note was Boeing which is one of the world’s most successful companies. There was much on display from the company including a model of the C-47 Chinook that made such an impact in the response to the earthquake that struck the previous year. Such a helicopter may be beyond the financial means of Pakistan but it would be a very welcome addition to the military/humanitarian airlift capabilities if procured. Furthermore a company closely linked with the F-16 deal was Raytheon, another American company that has been incredibly successful globally. During the exhibition it promoted a large number of its products and its range of CIWS may yet interest the PN, as it already operates the Vulcan Phalanx CIWS. Whether the PN will introduce the RAM, SeaRAM or the FLIR equipped latest version of the Phalanx remains to be seen, but the main product of note was the AIM-120 AMRAAM. Pakistan has officially (rumours persist, but until confirmed they are still an object of speculation) been without an operational BVR capability for two decades despite its best efforts to induct such a capability. In the aftermath of IDEAS2006 it was announced that Pakistan had signed a contract for 500 of the latest version of what is the global benchmark for air-launched BVR missiles. Clearly the past misfortunes of the PAF are being rectified.

French industry was also present and in a big way, if not in its own right with companies such as DCN, then as part of European multi-nationals such as EADS and MBDA. The inroads the French have made into Pakistan have been impressive, as they are involved in projects and supporting platforms used by all three services. In the past the major standard-bearer of French products has been the Mirage series of aircraft that currently serve the PAF so well, however at IDEAS2006, the main item the French were being linked with was the ongoing programme for the next generation PN SSK. Competition is fierce with the French contender being the DCN Marlin SSK. The submarine is a development of the DCN Scorpene SSK and incorporates technology from the Barracuda SSN, the French Navy’s next generation nuclear-powered hunter killer. The design incorporates a new diesel AIP system as standard, rather than as an optional extra, as with the current Pakistani Agosta-90B/Khalid class SSK. It has increased range and endurance, plus greater manoeuvrability for operations in shallow littoral waters. No less than the chief designer of the Marlin was present at IDEAS2006 to answer any questions that may be on the minds of the attending media, and the in this regard the large DCN stand was very busy. If there can be a criticism of the Marlin at this stage though it is a major one, it is yet to make its way off the drawing board, and therefore cannot be fully physically evaluated. The DCN maintained though that this was not a problem as the Marlin being an evolution of an existing design is actually proven technology. Not everybody was convinced by this argument, though it was a credible rebuttal of the criticism. The same criticism cannot be made about the Marlin’s rival, the German Type-214 SSK, as it has already won export orders from South Korea and Greece. HDW, the producer of the Type-214, has a major bone to pick with the French. It lost out against the DCN Scorpene in Chile (admittedly due to its own mistakes), and India (where it was not even permitted to bid due to - now resolved - legal issues). It would therefore be a major accomplishment to ‘steal’ a traditional French customer that has operated no other submarines but French ones since the early 1970s (Daphne – decommissioned, Agosta-70, and Agosta-90B). A development of the incredibly successful Type-209 series that incorporates technology from the deadly Type-212A, the Type-214 is a very potent platform which has already impressed enough to have won orders. According to the German officials present at IDEAS2006, the Type-214 was an ‘evolution’ of the Type-212A ‘revolution’. It appears to be more hydrodynamic than the Marlin, (though that should of course not be a deciding factor in itself), and incorporates a hydrogen fuel-cell AIP that is integral to the submarine design. It comes equipped with a formidable range of weaponry that may include the IDAS submarine launched missile system that is capable of engaging air or surface threats. Whatever the outcome of the competition, the PN will find itself equipped with an incredibly capable platform. One recent addition to the DCN submarine portfolio is the SMX-23, a small SSK intended for coastal operations or for first-time submarine operators. Though no such requirement exists for Pakistan to operate such a submarine, it would, (if inducted), allow the PN to keep a larger number of submarines at sea for no significant change to the operating costs of the fleet. If the contract would allow, it would also give Pakistan a product that it could export to friendly countries in the region such as Bangladesh, Sri Lanka and the Gulf States. All this would likely require a sizable increase in indigenous industrial capacity, not to mention an increase in finances so it is unlikely to happen. However, DCN clearly had its eye on a potentially more lucrative prize. There is a stated requirement with the PN for a number of corvettes, and DCN was not slow in displaying a model of the Gowind-120. The design incorporates technology derived from the Aquitaine FREMM programme and is undoubtedly a very capable vessel that would fully satisfy the PN’s requirements. This decision will not be made for sometime, (certainly not until the SSK programme has been finalised), but DCN clearly thought it was better to have their product established as a potential contender.

There were also companies present from many other countries. British defence companies such as Cobham and Martin Baker were some of the most high profile. Cobham is likely to supply the in-flight refuelling equipment for the Il-76 aircraft that were recently ordered from the Ukraine. This capability will significantly enhance the effectiveness of the PAF frontline fleet, and over time deliver considerable cost savings through allowing for a greater flight hours/fuel consumption ratio. IDEAS2006 also saw one of the most famous British companies attending, Martin Baker, the global leader in ejection seats for fast jets. The company has recently branched into providing crash resistant seats for helicopters, and has already built up a considerable range. However, it was its Mk-16LE state of the art ejection seat that was the hot topic for the company during IDEAS2006 as it has been selected for the FC-1/JF-17 (termed CN-16LE and PK-16LE respectively). Over 1000 seats in the series have already been delivered to date having been selected for service in a wide range of aircraft such as: Typhoon, Rafale, Lightning II, T-50, T-38, F-5 and T-6. What is perhaps an ultimate irony is that the seat has also been selected for the Indian HAL Tejas, which was once the great rival of the JF-17 in South Asia. The slow pace of that project has resulted in the Tejas as being years away from operational service if at all. The Mk-16 offers simple, minimal, long internal servicing to provide low cost of ownership. It has a ‘4th generation’ electronic sequencer, and features enhanced parachute deployment allowing for an ejecting pilot to be safely under a fully deployed canopy (even at low speed and low altitude), far quicker than is currently possible with other ejection seats. There were mixed fortunes during IDEAS2006, as with the crash of a PAF Mirage, Martin Baker saved the life of the pilot through having an earlier model of seat fitted, (though Pakistan lost an aircraft). Romanian industry was represented by the state owned company Romarm, which secures business for national companies. Over the years of the Cold War Romania built up considerable expertise in the arms industry, and has much to offer in the way of joint projects with Pakistan. The Greek company Sunlight Industrial Complex, makers of batteries for submarines and torpedoes was also present. Sunlight batteries power the Pakistani Agosta-90B and X-craft fleets, and according to the company representative offer greater flexibility over those fitted originally because they are longer-lasting. Though somewhat low-profile the clients this company has successfully managed to acquire speak volumes for its products. Not only are Sunlight batteries fitted to Greek submarines but they also fitted to Egyptian, Ukrainian, Polish, Peruvian, and South African submarines. Clearly the origin of the platform and therefore batteries are no constraint for Sunlight; they are plainly able to make their product fit customer requirements. Saab also displayed a number of its wares, but perhaps they were overshadowed by the main item of interest, the Saab-2000 AEW&C Eyrie that has been ordered by the PAF. When delivered they will fulfil a long-standing PAF requirement for an AEW capability. This need was first apparent in the 1980s when Soviet aircraft were able to bomb Pakistani villages along the border with Afghanistan that were marshalling areas for mujahideen forces preparing to enter the occupied the Soviet occupied country. Though the PAF carried out a number of successful intercepts and managed to down a number of Soviet aircraft, an AEW/AWACS capability would have denied the Soviets the relative element of surprise it had in many cases. Though America offered the E-2 Hawkeye AEW platform, this was deemed unsuitable by the PAF which held out for the E-3 Sentry AWACS. In the end, it got neither, and its source of high-end equipment, America, became off limits for just over a decade. The need was further underlined during the Kargil standoff in 1999. Though two Indian aircraft were shot down by ground forces, the PAF only played a deterrent role against IAF intrusion whilst a grim battle was waged across the Line of Control in Indian occupied Kashmir. Despite the fact Indian aircraft did not intrude into Pakistani airspace, the situational awareness over the mountainous Kashmir region was inadequate just as it was when the Soviets were occupying Afghanistan. Only an AEW/AEW&C/AWACS system would rectify this, and there was also pressure from the Indian side as the next year the IAF began an extensive evaluation of the Beriev A-50 AEW. Three years later the IAF ordered three Israeli Phalcon AEW systems (of the same type that had previously been sold to China, but the contract was cancelled due to American pressure). These were to be fitted on the Il-76 Candid, the airframes of which would be flown from the factory in Uzbekistan to Israel for the installation of the system. The pressure was therefore on the PAF to match this capability or accept that it would be totally outclassed in the air over its own territory for the first time. There had been speculation for sometime that Pakistan was interested in the Swedish Eyrie AEW&C system and an order was eventually signed for six platforms. More systems may find their way into Pakistani service either from America in the form of the P-3 AEW, (see above) or a Chinese system similar to the Eyrie equipped Saab. In any case the Eyrie AEW&C system was of great interest during IDEAS2006.

When it comes to a nation that is synonymous with partnership and Pakistan though, it has to be China, and Chinese military enterprise was a considerable presence at IDEAS2006. The relationship between Pakistan and its ‘all weather friend’ is extensive, and in the military field it covers all three services. The most prominent Sino-Chinese co-operation was of course the JF-17 Thunder, which seems to have captured the imagination of the public much like the F-86 Sabre and the F-16 Fighting Falcon have done so previously. This is despite the fact that the aircraft was at the time of the event yet to fly in Pakistani airspace, let alone wear PAF roundels and fight a war. Whether it was the CATIC stand, the PAC, or the PAF stand, there was always a throng of visitors wanting to know more about the latest exciting development in the PAF. The JF-17 promises to be a lightweight multi-role fighter that will replace the A-5, Mirage-III/V, and F-7 aircraft in the PAF inventory. It is also aimed at customers wanting to replace aircraft such as the F-5 Freedom Fighter, MiG-21 Fishbed and other such aircraft, or acquire an affordable (both in terms of initial cost and operation) fighter aircraft with modern capabilities for the first time. The fact that it is likely to be relatively sanction free platform from a reliable source, will no doubt interest a great many potential clients. The aircraft will be co-produced in China and Pakistan, so there will be plenty of scope for potential export orders to be met, as well as the PAF obtaining a ‘sanction proof’ frontline aircraft that can be fully supported by indigenous industry. The officials at PAC were quite open about their plans for the development of the aircraft, with an in-flight refuelling capability (perhaps even conformal fuel tanks), and other such improvements envisaged. The main task at present though is to get the aircraft flying in PAF colours and fully operational, and worry about these things once this has been accomplished. One cloud that seems to cast a shadow over the project is the engine. The Russian RD-93 (a derivative of the RD-33 that powers the MiG-29) is currently powering the prototypes, and is set to power the Chinese aircraft. It is unclear however, if this deal allows for the engines to be exported to third parties such as Pakistan, and Russian officials are on record in saying that an ‘end user certificate’ would have to be given (presumably for their approval) by the Chinese in the case of export orders. With Russia’s longstanding relationship with India there has been much pressure from New Delhi in making sure this does not happen. However, both PAF, and PAC officials, were absolutely confidant there would be no problems, and the JF-17 would fly in Pakistani colours as planned. If this means they will not be powered by the RD-93, then the only other option at present is the WS-13 engine being developed by the Chinese. The performance of this engine is stated to be superior in terms of reliability and power, to the RD-93, so there is a silver lining to this cloud. The only issue may be that the PAF may have to wait a short while longer for the JF-17 to enter operational service. A more tangible display of Sino-Pakistani aircraft collaboration was the K-8 Karakorum that was on display at the PAF outdoor display. The K-8 advanced/basic jet trainer that has sold very well overseas, particularly in Africa where the Egyptian Air Force is its biggest customer and is building the aircraft under license. Parts of the aircraft were built by PAC, but the decision was made early on not to opt for a Pakistani construction line, as it was thought that there was insufficient indigenous experience at the time to make this realistic, or even practical. Instead, it was decided that some parts for the aircraft would be made in Pakistan to help build up more experience in aircraft manufacture before taking on full assembly/production of an aircraft, a decision that has directly led to the JF-17 programme. In PAF service it is thought the K-8 will completely eventually replace the T-37 in the training role, where it is already more popular due to the tandem seating arrangement for pilot and instructor. This layout helps boost trainee confidence due to the isolation from the instructor. The K-8 is likely to remain in service for a considerable time yet.

Though it may not be so obviously stated the Al-Khalid also has its roots in a Chinese design, the Type-90II, but there has been considerable improvement of this type that took nearly a decade. In this time a number of prototypes were presented to the PA, including a 120mm model equipped with mainly Western systems, and one with fully Chinese systems. What was selected chose the best from what was available, including its powerful Ukrainian engine, which is the key factor in its excellent agility. This was apparent for all to see during the daily mobility display that showcased various PA vehicles, of both indigenous and foreign design. The Ukrainian connection did not end there as the Al-Khalid displayed at the HIT outdoor stand (billed as a ‘product improved Al-Khalid’) included the ‘Varta’ optronic countermeasures system. ‘Varta’ is capable of decoying ATGMs, and also countering laser designators and laser rangefinders by making them give false readings. The Al-Khalid is therefore fast, agile, and it also packs a punch with its 125mm smoothbore gun. The ‘hunter-killer’ capability it has is due to the commander’s independent thermal sight, and the Battle Management System (BMS). These allow the tank to track targets and also share information with other tanks in the formation. Such sharing of information would be a key asset in quickly getting to grips with and enemy and winning an encounter. The commander can identify targets and lay fire as he sees fit, with the capability to override commands made by the gunner. The gunner is also equipped with a high quality thermal sight, meaning the Al-Khalid is fully capable of night action, (in this respect the driver is equipped with a passive night sight). The Al-Khalid has been extensively promoted by its producer, Heavy Industries Taxila (HIT), and the first export order has been secured with Sri Lanka placing an order for a small number. The Al-Khalid’s ‘stable-mate’ from HIT, the Al-Zarrar (an upgrade of the Chinese Type-59), was also heavily promoted, and took part in both the static, and mobile displays. Though not as advanced as the Al-Khalid, it has a crucial part to play in PA service in maintaining numbers whilst the Al-Khalid provides the ‘mailed fist’ of the PA armoured strike arm. Suspension, transmission and the power-pack are all new, as is the armoured package that covers the frontal arc of the tank. The turret has been up-armoured with an additional layer of composite armour, and there has also been a layer of ERA placed over the turret and the frontal part of the hull. The 125mm necessitated the turret be raised to accommodate the additional bulk, but this is not so apparent due to the added armour. There is no auto-loader like the Al-Khalid, so the turret is rather cramped for three people, but the philosophy behind the Al-Zarrar was that it would provide a tank capable of surviving on the modern battlefield at an affordable price. The Al-Zarrar continues to enter PA service in large numbers where the Type-59 forms the backbone of the MBT fleet. The main target in terms of export attention has been Africa and Asia where the Type-59 and early T-series tanks are present in large numbers. The potential customers are unlikely to have the financial resources to purchase more modern types, so the outlook is favourable. The Al-Zarrar has already been ordered by Bangladesh as an upgrade for its Type-59 fleet. HIT’s products do not stop at tanks though as it also offers a range of vehicles based off the M-113 and indigenous Saad/Al-Talha tracked APCs. These were exhibited at the HIT static display, and put on an excellent show during the mobility display. A variant of the M-113 produced by HIT that is of particular note, despite no customer having yet come forward, is the Hamza IFV. Armed with an unmanned turret that packs a 25mm cannon and co-axial 7.62mm, the Hamza is definitely well armed, and being based on the basic M-113 chassis, it is tough and versatile. There is no requirement for such a vehicle in the PA, but it is readily available should any customer place an order, or even request a similar armament on the Saad or Talha APC. The Al-Talha and Saad are essentially the same but the Saad is slightly longer with an extra road wheel. The Saad has been linked with a possible sale to the Saudis, (along with the Al-Khalid), but the deal may not now take place. The Al-Talha has however been sold to Iraq along with another HIT product, the Mohafiz internal security vehicle. The Mohafiz is based on the Land Rover Defender but has a much altered aluminium body. It is in service with Pakistani security forces and has proved itself to be a valuable asset. The most interesting (and newest) HIT vehicle at IDEAS2006 though was the Discreet Armoured Vehicle (DAV) that is based on a normal Toyota saloon/sedan. It is the first time that such a vehicle has been made on so light a chassis, and it comes at a time when there is soaring requirement for such vehicles, for both government and private use. It is capable of withstanding fire from 7.62mm NATO ball ammunition, has an armoured undercarriage to protect against hand-grenade explosions, and can travel for a considerable distance on its ‘run-flat’ tyres. Externally the vehicle has no differences to an unmodified vehicle, and there is currently no comparable level of security on a vehicle of this size available. Other armoured vehicles on the market are based on larger, more expensive models such as Jaguars, Range Rovers, or the ubiquitous Mercedes. These are far from discreet though, and attract a great deal of attention, especially in less well developed countries. Therefore HIT has clearly identified a niche in the market, and the DAV is certain to be an export success. It was during IDEAS2006 that the Lebanese Minister of Industry, Pierre Amine Gemayel, was assassinated in Beirut after his car was ambushed by gun wielding assailants. Had he been in the DAV, he would clearly have survived.

The Military Vehicle Research Defence Establishment, (MVRDE), has a come a long way since it was founded in the aftermath of the 1971 Indo-Pakistan war where sanctions had an adverse effect on the defence capabilities of Pakistani forces. At IDEAS2006 it had a number of its very wide selection of products displayed at its static display, with some of these vehicles also taking part in the mobility display. These included its AVLB mounted on an M-47M Patton MBT chassis. The bridge is of aluminium construction and capable of spanning a 21.58m gap, and supporting weights of 60 tons; it also capable of being tandem launched with similar short/medium span bridges. MVRDE also displayed two of its anti-mine vehicles the ‘Troll Anti-Mine’ and the ‘Dragon Engineer Mine Plough’. Both are based on the chassis of the T-55 MBT, but whereas the Dragon rolls anti-tank mines out of the path of the tank and advancing forces, the Troll deliberately detonates them. The Dragon uses two sets of ploughs, the tines of which dig out buried mines and roll them away from the tank. A roller assembly is fitted to the rear to deal with anti-personnel mines in the ploughed area. The Troll’s clearing rollers can withstand up 12 anti-tank blasts and sweeps two 90cm lanes at up to 12kmh. The assembly is controlled by the driver, and the mechanism can be fitted or removed using the jib that is also fitted. MVRDE’s mine clearing devices have been a real success story, and the most notable foreign customer has been Kuwait, which is still dealing with a legacy of war and invasion. MVRDE also displayed one of its mobile workshops, tankers, an Al-Khalid simulator, semi-trailer, and Track Launch Assembly (TLA). The Class-60 hydraulic TLA allows for tracked or wheeled vehicles up to the weight of 60 tons to cross soft terrain. It is mounted on two 6-ton Yasoob 6x6 trucks, spans 45m, and can laid or retrieved in 7-10 minutes. The 60-Ton Semi-Trailer can carry any vehicle weighing up to 60 tons over metalled, dirt, and shingle tracks. The trailer provides uniform payload support for vehicles carried. MVRDE continues to work on a number projects for a wide variety of applications and is likely to have a number of new products on display at IDEAS2008.

One other area in which Pakistani industry has made significant advancements is in the manufacture of UAVs. There are a number of companies working the field but the four major companies are Albadeey Technologies, Advanced Computing & Engineering Solutions (ACES), Integrated Defence Systems (IDS), and Integrated Dynamics (ID). All have considerable experience, and between them have won a number of domestic and foreign contracts. Integrated Dynamics’ products are certainly not conventional in appearance, and it has perhaps been the most successful in terms of a high profile foreign sale, when its ‘Border Eagle Mk2’ was ordered by the American authorities for border patrol duties. It is a low altitude, border and perimeter monitoring UAV, with a top speed of 160km/h, 50km range, and an enhanceable endurance of 4 hours. The payload is relatively light at 5kg, but it is interchangeable, with various payloads capable of being carried. With technology rapidly shrinking UAV sensors, this will undoubtedly not hold the Border Eagle back. Three other ID products of note displayed at IDEAS2006 were the ‘Nighthawk’ High Altitude Long Endurance (HALE) UAV, the ‘Desert Hawk’ UAV, and the ‘Tornado’ UAV. The Nighthawk is a 100 mile range, 15hr endurance platform with a 125mph max speed. It can carry a 6kg payload in a combination of daylight/IR TV and still cameras that are activated as required. It is equipped with a UHF data-link. The Desert Hawk is a low altitude and perimeter monitoring UAV. It has a carbon-composite platform equipped with micro gyro-stabilised payloads in its payload bay. It has a 100mph max speed, 18.75 mile range, and an enhanceable 3hr endurance. The ‘Tornado’ on the other hand is not a surveillance UAV but rather an expendable drone designed to confuse the enemy into thinking it is a real attacking aircraft, and expend valuable SAMs in an effort to destroy it, (or at least turn on a dormant air defence radar so it can be attacked with SEAD aircraft). As the name would suggest it is a perfect replica of the one of the best strike aircraft currently available, the Panavia Tornado, which is in service with the RAF, German air force, Italian air force, and the RSAF. IDS on the other hand exhibited its ‘Huma-1’ tactical UAV. It is a composite UAV that performs a wide range of remote sensing tasks. Range is 500km, max speed 180km/h, endurance 5-6hrs, and it has a 100km operational radius. It carries a 20kg payload and includes a real-time video transmission system. ACES displayed its ‘Eagle-Eye-P1’ UAV and also exhibited the ground Control Station (GCS) from which it is controlled. The ‘Eagle Eye-P1’ tactical UAV has an 80km range, 3hr endurance, and 120km max speed. Tracking is GPS based, and it carries a 30kg payload of a 'pan, tilt & zoom' video camera for real time digital video surveillance. One of the most established Pakistani UAV companies, Albadeey Technologies, was also present. It has a vast amount of experience and has produced a number of high quality UAVs and target drones. The most eye-catching is undoubtedly the ‘ABJT Target Drone’. The ABJT is a high speed, jet powered, target drone. It is a medium range expendable target for air-to-air, AAA and SAM training. It is available in autopilot (5km), and BVR (20km) versions. Normal range is 2km. A less sophisticated target drone, the ‘Shahzore’, is also available. It is a medium range, propeller powered target drone for AAA and SAM training with an endurance of up to 90 minutes. It is available in autopilot (5km), and BVR (20km) versions. Normal range is 3km. The most basic Albadeey target drone is the ‘Ababeel’. It is used by PAF/PA and a number of other customers, and is a cheap, effective, and expendable solution for training personnel in ground based air defence. Its manoeuvrability allows it to simulate any attack profile. Albadeey also displayed two surveillance UAVs, the ‘Hud Hud II’ and ‘Hud Hud III’. The ‘Hud Hud III’ is an enlarged version of the ‘Hud Hud II’ with greater endurance (6hrs) and range (100km). It can carry a 40kg payload which is usually a high resolution CCD camera, GPS, and frequency modulated L Band video transmitter. The Pakistani UAV industry continues to improve and there a number of new exciting projects in the pipeline that will be targeted at the Pakistani armed forces, and increasingly, foreign customers, as the industry branches out to secure more overseas clients.

One of the most well patronised displays by far though was the ‘Army Strategic Forces Command’ (ASFC) display, where indigenous missile technology was present for all to see. The missiles were strictly not for sale but for display purposes only. A separate tent was made available for those who wished to meet the ASFC officers present. It can safely be said they were amongst the most open and welcoming of any of the personnel at IDEAS2006, whereas the nature of their work in being responsible for the operation of the nation’s nuclear deterrent, may have suggested this may not have been the case. The display was certainly impressive with nearly the full range of missiles on display. The missiles displayed consisted of: Shaheen-I/II, Ghauri, Babur, and Ghaznavi. All bar Babur are ballistic missiles with the Shaheen-I/II and Ghaznavi missiles being solid fuelled, and Ghauri liquid fuelled. Babur is a land-attack cruise missile closely resembling the American Tomahawk. It is the newest addition to the ASFC arsenal, and is a 500km range, 1500kg, weapon with a 300kg payload, and 10m CEP. It is currently land-based but like the Tomahawk there is no reason why it could not be modified to be fired from a submarine if the requirement arises. An air-launched version is also a possibility, but merely being possible does not mean it is likely to happen. A requirement has to exist first for this to take place and currently Pakistan is content with what it regards as its ‘minimum deterrent’ of land based strategic missiles. All in all ASFC showed they were approachable and helpful, but at the same time displayed the exceptionally high level of dedication and professionalism as would be expected from them.

When the decision was made to produce military equipment indigenously, Pakistan produced little more than small-arms and ammunition. This has expanded considerably and now Pakistan produces increasingly sophisticated weaponry and equipment. However, despite the growing sophistication Pakistani industry has maintained what it is known for, quality at an affordable price. The main standard bearer for weaponry and ammunition of varying calibres is Pakistan Ordinance Factories (POF). Everything from small-arms to artillery ammunition is produced by the company, and it continues to make great strides in producing for Pakistani armed forces and increasingly, for export. The small arms are aimed primarily at the African and Asian markets where there is not really the requirement for the latest technology, only that what is on offer is affordable and reliable. This is the reason weapons like the RPG-7 and 106mm recoilless rifle are still produced and exported. During IDEAS2006 agreements were signed with French and South Korean companies for 155mm artillery ammunition. This calibre is the global standard for heavy artillery and POF will no doubt make great efforts to secure export customers after having established itself as a supplier of high quality and reliable products. POF also produces tank ammunition in varying calibres from 100mm to 125mm. The POF 125mm APFSDS-T is naturally offered for export with the Al-Khalid and Al-Zarrar, ensuring there is as much reliability as is possible in the supply of materials for a potential customer.

This reliability of supply can be extended to include a great deal of other systems for the tanks including the night vision systems and laser range finders thanks largely due to ATCOP. The Al-Zarrar gunner’s night sight is produced by the company and as is a laser range finder for T-series tanks. The night sight in particular is of particular interest for customers as the capability to fight at night is crucial on a modern battlefield. Night vision equipment for personal soldiers is produced by the Institute of Optronics, which produces a number of night vision devices from a monocular to weapon-based sights, and NVG goggles for pilots. These devices are in increasingly wide spread use in the Pakistani armed forces, and have been used extensively along the border with Afghanistan as the security forces tackle the Al-Qaeda and Taliban menace. Pakistani industry is also branching out into new areas such as air deliverable weapons such as the Durandal anti-runway bomb, Combined Effects Munition (CEM), and the Mk-15 Retarder Tail Unit (RTU) for Mk-82 bombs. The first two items are produced by Nescom and offer potential customers devastating weapons that have till recently only been available from more developed nations. The Durandal can be used against any hardened target such a runway or bunker and works by detonating after the warhead has burrowed into the target, thereby increasing the level of devastation. The CEM is a general purpose weapon that is packed with 247 bomblets for use against troops and armour. The Mk-15 RTU allows for Mk-82 bombs to be released during a high speed low-level pass by retarding the fall of the bomb, and allowing the attacking aircraft to safely depart the scene prior to detonation. In this respect it works in a similar fashion to the Durandal, though this weapon is first parachute retarded, and then boosted by a rocket motor into the target surface. Clearly these are just the beginnings for Pakistani industry’s venture into more sophisticated weaponry and there is a clear line that can be drawn from retarding simple **** bombs and unguided munitions, to something more substantial. The next stage will undoubtedly be PGM, and with experience that has been gained with such systems as the Babur LACM, these developments may be apparent by as early as IDEAS2008.

One area of Pakistani military industry that has been overlooked until recently has been the maritime sphere. However, there has been a great deal of progress made with indigenous Pakistani products that have a naval application. Karachi based Marine Systems Limited (MSL) has manufactured a number of products including a training simulator capable of simulating any sensor system, on any naval platform, under any climatic and sea state conditions. This will increase the amount of training done on land, easing the burden on operational assets considerably. MSL also produces a number of display units that can be used in various applications on board naval platforms, which was the one of the steps it took before producing its training simulator. The main MSL breakthrough though has been its Towed Array Sonar (TAS) for submarines. Systems already in service with the PN were found to be too bulky, heavy and based on old technology. MSL’s TAS is not only lighter and more compact, but was found to have a performance superior to designs currently available to the PN. The system will be installed on current PN submarines (where on the Agosta-90B it will be integrated with the SUBTICS combat management system), and also the winner of the submarine contract. The system is being offered for export to friendly countries, in particular those in the Gulf States. Also present at IDEAS2006 was Karachi Shipyard and Engineering Works (KSEW). It is Pakistan’s major shipbuilder and has built a number of warships for the PN. These have included the Shujaat FAC, replenishment ships, and also the Agosta-90B class SSK. The next big projects for the shipyard will be the new SSK for the PN and also the F-22P. The pattern the shipyard has been following is to have slowly built up key experience in building various types of warships in terms of size and complexity, and will move to the next stage with the F-22P as it will obtain some experience in major warship design as well as construction. Only the final ship of the batch of four will be built by KSEW, but the hope is that the experience will be put to good use in building the PN corvette fleet when a decision is made, and also a proposed follow-on class from the F-22P. The ultimate aim is for the shipyard to be a designer and exporter of such vessels, and the experience gained is slowly leading in that direction.

Not all the companies present were concerned with the manufacture of weapons though as some, such as Australian company Aerostructures Technologies deal with ensuring the structural integrity of aircraft. This is an increasingly important service as aircraft remain in service longer, and therefore the fatigue experienced by the airframe is greater. The company has helped the PAF maintain its fleet of FT-5 training aircraft, but also works on many other airframe types (it has worked on the RAAF Orion and F-111 aircraft) from fast jets to helicopters. For helicopters and MPA in particular the maritime environment has a harsh effect on aircraft, so ensuring structural integrity of MPA and helicopters is big business. The representatives from the company seemed to have been in great demand, and were kept busy talking to a number of visitors representing foreign governments.

It is clear therefore that IDEAS2006 was one of Asia’s major defence exhibitions, and with current trends it is likely to expand yet further over the coming years. As an opportunity for Pakistani companies to display their products and the advances they have made, it is an invaluable event. Past exhibitions have helped to raise the profile of local industry and win orders from foreign customers. IDEAS has also proved itself to be an unrivalled networking event for industry and government officials from around the world. When it comes to defence exhibitions and the wider defence industry, Pakistan has shown it knows how to handle things.
 
.
If you are going to talk about IDEAS then allow me to talk about Aero India. And remember, this was just mainly about Aviation. If you check the Aeri India thread you will see the NUMBER of Indian companies that participated and displayed their equipment during the show. And you will also realise how big the show actually was, with more than 50 countries participating.

Apart from that one search in google and you will find all the equipment shown by Indian defence companies dyring the show to get a small idea of what the industrial sector is in India.

Pakistan's industrial base is very small compared to India's. I'd rather Pakistan made an attempt to make its OWN plane bfore commenting on another. Buying Chinese and saying it is this or that is useless. India is atleast trying to make the plane, and it will also be inducted soon.
 
.
If you are going to talk about IDEAS then allow me to talk about Aero India. And remember, this was just mainly about Aviation. If you check the Aeri India thread you will see the NUMBER of Indian companies that participated and displayed their equipment during the show. And you will also realise how big the show actually was, with more than 50 countries participating.

Apart from that one search in google and you will find all the equipment shown by Indian defence companies dyring the show to get a small idea of what the industrial sector is in India.

Pakistan's industrial base is very small compared to India's. I'd rather Pakistan made an attempt to make its OWN plane bfore commenting on another. Buying Chinese and saying it is this or that is useless. India is atleast trying to make the plane, and it will also be inducted soon.

Your still ranting on, LCA, engine is someone else's, and I doubt you guyies made the electronics yourselves without help (possibly from Russia, knowing you guyies will soon ask for help for Arjun), knowing this is India's 2nd attempt making a plane (after the first one failed sitting in a museum), Arjun you guyies were asked to receive help, from your own govt. Just cause India might make something don't pretend its top class. Oh, and how soon cause it's almost going to hit it's 3rd decade soon, same as your Arjun.

Hell I even posted Pakistan's Software, optics military industries in my previous post, what makes you think Pakistan isn't involved?! Instead talk with proof, instead of trolling.

All in all what i'm saying and I even mentioned that even though Pakistan is small, we make what we need to make, instead of wasting money, 50 companies might come as well others come to IDEA, so your not proving anything here, instead shooting down Pakistan industrial capability, knowing full well you buy all your own from "Mother Russia". Hell even your own artillery shells were faulty from Russia, I guess like father (Russia) like son (India)!

Just to show you on the F-7HUD:


The Head Up Display of an F-7P. This particular software for our F-7Ps HUD was created by the engineers at Kamra Aeronautical Complex.

So don't doubt Pakistan's capability, we have actively participated in the project we had our engineer and other teams their.

But what can I say it's your inferiority complex that claims everything we get is from China.
 
Last edited by a moderator:
.
Status
Not open for further replies.

Pakistan Affairs Latest Posts

Back
Top Bottom