What's new

HAL Tejas | Updates, News & Discussions

Status
Not open for further replies.
PEARLS & HEROES of TEJAS

“My father is 80 years old and he reads all the newspapers and updates me about the happenings around aviation. I leave home at 6 am every day and return by around 7 pm. Close to over two decades, life has been a great challenge dealing with some complex issues in aeronautics. Finding solutions and getting them accepted is some task in our profession. But, it gives a great sense of satisfaction,” says S K Chandrka, DGM (Electrical and Avionics), Aircraft Research and Design Centre (ARDC), a prominent unit of Hindustan Aeronautics Ltd (HAL). “There have been some sleepless nights. I remember once a wire got inside the aircraft and I was really restless till we found the reason,” says Chandrika, with over 26 years of experience.

City Express caught up with some of the women designers from ARDC, working with India's Light Combat Aircraft Tejas programme, to capture their mood ahead of the initial operational clearance (IOC) event scheduled to be held in the city on December 20. Despite being their first interaction with media in their career, these women showed little hesitation in replying to the queries. K Sharadha, AGM, Flight Test Centre who has close to 30 years of experience at HAL, said that the family support played a crucial role during all these years of hard work and toil, in realising the national dream called Tejas. “I was involved with the programme from 1995 and was part of the team that set up the infrastructure, telemetry ground stations and configuration of flight test instrumentation. My family was aware of the critical nature of my job and they stood rock solid behind me,” says Sharadha a native of Tamil Nadu.

Hailing from Mangalore, Sumana Prakash, is a Chief Manger (Design) with two decades of expertise in aeronautics. She was part of the Tejas programme right from the first day of her joining HAL. The project just completed the drawing stages and the prototype was getting ready. “It is really a matter of pride being associated with Tejas and I am part of the electrical design team. I have gone for outstation trials to Leh and life throws up many challenges. I am also part of some of the future programmes of HAL. Being a woman, I need to make adjustments to my family life. Sometimes my children get upset with me for being on the phone even while at home, clarifying some test points with my colleagues,” says Sumana.

Leaving a lucrative job with ABB, Rashmi Joshi, Manager (Electrical Design), joined HAL in 2001 and has been part of the Tejas project for the last 12 years. She has travelled to France on work and says that the job satisfaction is tremendous. “Nothing can match the thrill of taking challenges head on. Tejas wiring is really extreme with around 12,000 points. Life has become interesting with so many modifications being done to Tejas,” says Rashmi, hailing from Nagpur. Her colleague S Meena, Manager (Electrical Design) had to stay away from family for close to 10 months, while she was sent on a deputation to Russia. “I had to take my son and mother along with me. Life was different in Russia and I learnt Russian as well. The varied experiences have boosted my self confidence,” says Rashmi, hailing from Thirvananthapuram.

When asked about their views on being in a male-dominated domain and the difficulties they are facing in executing, everyone was all praise for their male colleagues. “We have come this far with their support as well. The team I handle have only two women and the rest are all men. I found no problems. Just that, I switch off my family matters completely when I am at work. Aircraft designers need to be emotionless when they deal with intense programmes such as Tejas,” says Veena B, DGM (Prototype Assembly), who hails from Mysore.

Some of the designers came to the Tejas programme with rich experience of HAL's other projects like the Dhruv. Alakananda Suri, Manager (Iron Bird) from Lucknow joined HAL in 2000 and was put to Tejas project in 2011. As a Project Manager with HAL, she worked on a transfer of technology from Sagem (France). “It is a highly satisfying job and we were under tremendous pressure ahead of the IOC-2. The team work has been outstanding,” she sad. The women brigade felt that it is because of the test facilities like the Iron Bird and the rigourous testing philosophy adopted, Tejas had thankfully not seen a single accident so far, unlike almost all the similar programs running worldwide.

Emphasising on absolute team spirit, Kalaivani D, a Deputy Manager (Electrical and Avionics) felt that in the design stream each and everyone work as one, shedding their grades and ranks. “We are so focussed towards achieving one milestone after another. It is a dream come true for all of us to see that Tejas is finally getting into an induction stage,” says Kalaivani, who hails from Namakkal. “We are the real pearls of HAL,” she adds, and the entire group bursts out laughing.

While the women completed their media mission and got back to their world of design, there was another group waiting in the wings for an interaction at the Prototype Flight Hangar - the men.

They were from the shop-floor, the real unsung heroes of Tejas project. No cameras have ever chased them. They come to work at times as early as 3 am to keep Tejas ready for the pilots to undertake the flight trials.

Avinash Kumar (34) is a manager at the flight hangar who is with Tejas for past 11 years. “I am from Delhi and I've always wanted to be a part of the aviation industry. It is a great thrill to prepare Tejas for the flight, handling the snags and finally positioning the aircraft on the tarmac. My team consists of 50 people and we manage three aircraft. Never was there any dull moment for me since I joined the Tejas team,” says Avinash. Echoing his views was S K Tripathi (52), senior master technician, who joined HAL in 2003 with a 20 years of experience working with the Indian Air Force. “My memorable moment was during the first flight of PV-5. It is a wonderful machine. Every time the aircraft takes off, it give immense happiness. I have accompanied Tejas to Goa, Jamnagar, Jaisalmer and Leh. It feels like taking our children for some entrance test,” says Tripathi, who comes from Lucknow.

Being a rescue driver hailing from Tumkur, Balasubramaniam (35), plays a key role in ground support vehicle activities. He says for the last 10 years, he couldn't have asked for more, with the kind of exposure he got in dealing with different situations. “Even my relatives, family and friends are really happy that I am part of India's prestigious project,” says Balasubramaniam. According to K Vijayan (54), hailing from Kerala, the Tejas team overcame many hurdles by coordination with the designers. “We undertook lot of corrective measures and though we are from shop floor, some of our suggestions are also taken into consideration,” says Vijayan, an ex-IAF man, with 15 years of experience in HAL.

Similarly, Mohd Imtiaz (40), a technician, tells that plugging the snags is something he always enjoyed, while Shivkumar B H (42), a Senior Manager (Quality Assurance), says that to update new technology was a Herculan task. “We had to train the people so that they could handle the aircraft at ground level, independently,” he says. Veeraiah (40), a Manager (Quality Assurance), emphasised how his team stuck to the safety features of the aircraft. “If something goes wrong, everyone will point fingers at us as we are the clearing wing. We will have to be available when pilots does the debriefing sessions,” he says.

While these backroom boys were readying themselves to get a Tejas PV-3 ready for the flight, P G Jayan, DGM, Integration & Project Manager (LCA Mk-1), joined the discussion with his final words. “These are the true heroes of Tejas programme. The souls on the shop floor make things happen. There are days when they have worked for 16 hours. Having a great team is the biggest award you can get,” says Jayan, who have logged 28 years in HAL.

As we wound up, the pilot of Tejas PV-3 was throttling up for another sky party.

PEARLS & HEROES of TEJAS -The New Indian Express
 
. . .
Dear dude,
speed of sound is give by equation c=Square root(k/rho) where, k=Bulk modulus and rho=Density of Fluid.
But, Density of fluid changes with respect to pressure because by ideal gas law states that p=rho*r*t
where p=pressure,rho=density,r=gas constant and t=temperature in Kelvin.
but the pressure changes with respect to altitude and is give by, p=-(rho*g*z) where p=pressure,rho=density and z=Height,g=Gravitational Acceleration;
as the altitude increases pressure decreases,decreasing the density and thus cancelling out each other and hence no effect on Ideal Gas(AIR), BUT,
as we know
c=Square root(k/rho) and k=gamma*pressure where gamma=adiabatic index and is further given by
gamma=cp/cv;
cp=specific heat at constant pressure and cv=specific heat at constant volume;
so all in all the Speed of sound depends upon cp and cv which depends on temperature. But temperature depends upon Altitude it decreases for Troposphere and stays constant after tropopause till 20km;
so from 0-11km speed of sound decreases decreasing Mach number and after 11km to 20km it remains constant;
in Aeronautics specially for airplane design we consider altitude only from 0km to 22km.
Thanks.


Thank you very much dear. Excellent post. I have never read such a beautiful post in first post at PDF. You are well come and we look forward to a meaningful discussion on this forum. We hope to learn something from you.

Well come again.

in Aeronautics specially for airplane design we consider altitude only from 0km to 22km.
Thanks.


Obviously, because no Plane can travel above 22 KM. So velocity of sound will be less in High dense air and thus 1067 KMPH figures appears to be more realistic.
 
.
Last edited:
.
Last Flight test update from IOC-2:
From:
LCA-Tejas has completed 2439 Test Flights Successfully. (09-Dec-2013).
(TD1-233,TD2-305,PV1-242,PV2-222,PV3-378,LSP1-74,LSP2-289,PV5-36,LSP3-177,LSP4-102,LSP5-237,LSP7-76,NP1-6,LSP8-62)

To:
LCA-Tejas has completed 2448 Test Flights Successfully. (17-Dec-2013).
(TD1-233,TD2-305,PV1-242,PV2-222,PV3-380,LSP1-74,LSP2-289,PV5-36,LSP3-180,LSP4-102,LSP5-240,LSP7-77,NP1-6,LSP8-62)
 
.
Tejas needs to cross 6 milestones in 15 months ahead of FOC


By Anantha Krishnan M

Express News Service
Bangalore: The Tejas fighter will have to cross 6 milestones in the next 15 months before the aircraft is given the final operational clearance (FOC). Tomorrow's (December 20) initial operational clearance (IOC) event, ahead of the expected induction of the first series production aircraft into the Indian Air Force (IAF) by March 2013, would pave way for the IAF pilots to undertake independent flight evaluation of Tejas.
Dr K Tamil Mani, Director-General (Aeronautical Systems), DRDO and Chief Executive Centre for Military Airworthiness and Certification, told Express that the integration of new missiles identified by the IAF will top the agenda in the FOC phase. “The aerodynamics, structures and the integration of the missiles with the radar are important events for Tejas now. We need to evolve the algorithm,” Tamil Mani said. The beyond visual range (BVR) missiles from Israel – Derby and Python -- with a range of 70 km and each weighing 150 kg, have been identified for Tejas.
The Russian-made 23 mm GSH gun is the next in line to be integrated on the aircraft. Capable of firing at 3600 to 4000 rpm, the integration of this gun is seen as a challenge considering the vibrations involved during action. “Lots of surrounding LRUs need to be certified again for higher level of vibration. Ground firing or butt firing needs to be done initially before getting the gun onboard Tejas. The projectile speed of the gun is around 750 meter per second,” he said.
Tejas will also have an air-to-air refuelling probe (Cobham, UK) in the FOC configuration. “We have started the integration work. Similar work was done on Jaguar and AEW&C (Airborne Early Warning and Control) platform. We have the expertise now,” he said. The Tejas will also increase the angle of attack (AoA) from 22 to 24 degrees enabling the pilot to go for care-free manouvering.
The braking system of Tejas will also need to be improved. “The heat capacity needs to be increased. Else we will have to put a better cooling mechanism for the brakes, similar to the fans in the MiGs,” Tamil Mani said.
The nose cone radome of Tejas is another part that is expected to get a re-look. “Now the radome is made of composite materials and we will change it to quartz. Today we are getting a radar range of 45-50 km and we need to improve the same to 80-plus km with the new material,” the official said.
Copyright@The New Indian Express

Tarmak007 -- A bold blog on Indian defence: Tejas needs to cross 6 milestones in 15 months ahead of FOC
 
.
Tejas needs to cross 6 milestones in 15 months ahead of FOC


By Anantha Krishnan M

Express News Service
Bangalore: The Tejas fighter will have to cross 6 milestones in the next 15 months before the aircraft is given the final operational clearance (FOC). Tomorrow's (December 20) initial operational clearance (IOC) event, ahead of the expected induction of the first series production aircraft into the Indian Air Force (IAF) by March 2013, would pave way for the IAF pilots to undertake independent flight evaluation of Tejas.
Dr K Tamil Mani, Director-General (Aeronautical Systems), DRDO and Chief Executive Centre for Military Airworthiness and Certification, told Express that the integration of new missiles identified by the IAF will top the agenda in the FOC phase. “The aerodynamics, structures and the integration of the missiles with the radar are important events for Tejas now. We need to evolve the algorithm,” Tamil Mani said. The beyond visual range (BVR) missiles from Israel – Derby and Python -- with a range of 70 km and each weighing 150 kg, have been identified for Tejas.
The Russian-made 23 mm GSH gun is the next in line to be integrated on the aircraft. Capable of firing at 3600 to 4000 rpm, the integration of this gun is seen as a challenge considering the vibrations involved during action. “Lots of surrounding LRUs need to be certified again for higher level of vibration. Ground firing or butt firing needs to be done initially before getting the gun onboard Tejas. The projectile speed of the gun is around 750 meter per second,” he said.
Tejas will also have an air-to-air refuelling probe (Cobham, UK) in the FOC configuration. “We have started the integration work. Similar work was done on Jaguar and AEW&C (Airborne Early Warning and Control) platform. We have the expertise now,” he said. The Tejas will also increase the angle of attack (AoA) from 22 to 24 degrees enabling the pilot to go for care-free manouvering.
The braking system of Tejas will also need to be improved. “The heat capacity needs to be increased. Else we will have to put a better cooling mechanism for the brakes, similar to the fans in the MiGs,” Tamil Mani said.
The nose cone radome of Tejas is another part that is expected to get a re-look. “Now the radome is made of composite materials and we will change it to quartz. Today we are getting a radar range of 45-50 km and we need to improve the same to 80-plus km with the new material,” the official said.
Copyright@The New Indian Express

Tarmak007 -- A bold blog on Indian defence: Tejas needs to cross 6 milestones in 15 months ahead of FOC


what the hell??

range of 45-50 km upgarded to 80??

even jf-17's klj-7 has more range than that!!

and i thought el/m 2032 has 120 km range!!is there something wrong with our radome material??
 
. .
what the hell??

range of 45-50 km upgarded to 80??

even jf-17's klj-7 has more range than that!!

and i thought el/m 2032 has 120 km range!!is there something wrong with our radome material??


Range depends on target it tracks. ELTA's range is 120 KM (Some say 148 KM) for 2 SQM target. When scientist say that they want improve it to 80 KM it will certainly be for a small target.

Inspite of improving Radom material, new design radome is also planned.
 
.
Range depends on target it tracks. ELTA's range is 120 KM (Some say 148 KM) for 2 SQM target. When scientist say that they want improve it to 80 KM it will certainly be for a small target.

but all ranges are meant for a 3-5 m2 target generally
if they don't clarify it will be taken as such
 
.
but all ranges are meant for a 3-5 m2 target generally
if they don't clarify it will be taken as such


What is 3 to 5 ? it should either 3 or 5? it can not be same for 3 and 5.

For Elta, it is 120 KM for 2 SQ m target air to air mode. 300 KM for see target and 150 KM for land based target.
 
.
p2.jpg



p.jpg



p1.jpg


7.jpg



Bangalore: The Tejas fighter will have to cross 6 milestones in the next 15 months before the aircraft is given the final operational clearance (FOC). Tomorrow's (December 20) initial operational clearance (IOC) event, ahead of the expected induction of the first series production aircraft into the Indian Air Force (IAF) by March 2013, would pave way for the IAF pilots to undertake independent flight evaluation of Tejas.
Dr K Tamil Mani, Director-General (Aeronautical Systems), DRDO and Chief Executive Centre for Military Airworthiness and Certification, told Express that the integration of new missiles identified by the IAF will top the agenda in the FOC phase. “The aerodynamics, structures and the integration of the missiles with the radar are important events for Tejas now. We need to evolve the algorithm,” Tamil Mani said. The beyond visual range (BVR) missiles from Israel – Derby and Python -- with a range of 70 km and each weighing 150 kg, have been identified for Tejas.
The Russian-made 23 mm GSH gun is the next in line to be integrated on the aircraft. Capable of firing at 3600 to 4000 rpm, the integration of this gun is seen as a challenge considering the vibrations involved during action. “Lots of surrounding LRUs need to be certified again for higher level of vibration. Ground firing or butt firing needs to be done initially before getting the gun onboard Tejas. The projectile speed of the gun is around 750 meter per second,” he said.
Tejas will also have an air-to-air refuelling probe (Cobham, UK) in the FOC configuration. “We have started the integration work. Similar work was done on Jaguar and AEW&C (Airborne Early Warning and Control) platform. We have the expertise now,” he said. The Tejas will also increase the angle of attack (AoA) from 22 to 24 degrees enabling the pilot to go for care-free manouvering.
The braking system of Tejas will also need to be improved. “The heat capacity needs to be increased. Else we will have to put a better cooling mechanism for the brakes, similar to the fans in the MiGs,” Tamil Mani said.
The nose cone radome of Tejas is another part that is expected to get a re-look. “Now the radome is made of composite materials and we will change it to quartz. Today we are getting a radar range of 45-50 km and we need to improve the same to 80-plus km with the new material,” the official said.


Tarmak007 -- A bold blog on Indian defence: Tejas needs to cross 6 milestones in 15 months ahead of FOC
 
.
What is 3 to 5 ? it should either 3 or 5? it can not be same for 3 and 5.

For Elta, it is 120 KM for 2 SQ m target air to air mode. 300 KM for see target and 150 KM for land based target.
i know that

but till they specify clearly we can only guess.

looks like radome is pretty bad
 
. .
Status
Not open for further replies.

Latest posts

Pakistan Defence Latest Posts

Back
Top Bottom