Turkish Industry, Science and Technology

[Mr.Department]

http://www.e-berk.com/eng/

Are they capable to produce Tungsten kinetic penetrators and armor or this material for missiles in their metallurgical R&D Lab ?

 

[Attila the Hun]

Breakthrough made by Turkish doctors using 'ultra-mini' devices

It is now possible to operate on previously inoperable liver stones with 2.6-millimeter ultra mini devices, a first for medical literature according to the doctors who performed the operation.

Seyit Esen, 38, who worked at the Old Industrial Site in Konya, went to Necmettin Erbakan University Meram Medical Faculty Hospital with complaints of severe abdominal pain and jaundice. Test results revealed that there were 3-centimeter in diameter stones in his liver. The results propelled the doctors into action.

Professor Ahmet Öztürk, one of the surgeons, said: "The liver tends to bleed excessively and has very small vessels. Operations can cause damage. We moved comfortably through the channels with the tools we used and reached the stones. We were able to keep the bleeding to a minimum. The incision opened during the surgery was closed quicker." Öztürk also stated that they are proud of being the first clinic in the world to perform this operation.

https://www.dailysabah.com/health/2...e-by-turkish-doctors-using-ultra-mini-devices

 

[Attila the Hun]

Turkish mechanic lends hand to farmers with unique vehicle

Ali Buldan, 70, a mechanic who lives in the Turkish city of Afyonkarahisar, happily maintains his profession even after all these years on the job.

The seasoned mechanic started his career with horse carriage maintenance, but slowly made his way to producing a vehicle, known as "patpat" because of the sound its single-cylinder engine makes.

Providing great convenience for farmers because of its cheap production and maintenance costs, it takes only a week to 10 days to build a "patpat."

"Since a tractor has at least four cylinders, it burns more diesel. This vehicle burns a quarter of the fuel that a tractor does due to its single-cylinder engine. Most farmers who don't earn much prefer this vehicle," the veteran mechanic said.

"Even farmers with tractors demand the 'patpat,' Bulan said, "Because it is faster and more economical."

"The 'patpat' can go up to 90 kilometers per hour with a carry capacity of 2 tons. It does the job well. It can carry stones, bricks and even livestock. There are farmers who carry bale and beets in the summer," the mechanic added.

Buldan explained that the vehicle was not road legal at first because it was initially produced without headlights, but with the addition of some road safety equipment it was accepted as a farm vehicle by the Ministry of Food, Agriculture and Livestock.

Buldan said that a dumper "patpat" made of new materials costs between TL 15,000 ($4,200) and TL 16,000 ($4,500), while a vehicle made of old and recycled materials costs only about TL 8,000 ($2,250).

https://www.dailysabah.com/life/201...nic-lends-hand-to-farmers-with-unique-vehicle

 

[xenon54 out]

"The 'patpat' can go up to 90 kilometers per hour with a carry capacity of 2 tons.

One must be insane to drive 90 with this thing.

 

[cabatli_53]

The Metal Melted Layered Manufacturing Systems developed by Turkish company FİGES Engineering will be exhibited for the first time at IDEF 2017.

Developed with support of the Scientific and Technological Research Council of Turkey (TÜBİTAK) and thoroghly designed by Turkish engineers, the layered production systems, also known as "three-dimensional (3D) printers", began serial production at FİGES facilities in February this year. The factory, which started producing with three devices in two different categories, plans to produce five devices in three different categories in 2018.

FİGES' 3D Printer will debut at IDEF for the first time and then be presented to the world market at international fairs.

http://men.c4defence.com/Agenda/3d-printer-by-turkish-figes/4316/1

 

[Mr.Department]

The Metal Melted Layered Manufacturing Systems developed by Turkish company FİGES Engineering will be exhibited for the first time at IDEF 2017.

Developed with support of the Scientific and Technological Research Council of Turkey (TÜBİTAK) and thoroghly designed by Turkish engineers, the layered production systems, also known as "three-dimensional (3D) printers", began serial production at FİGES facilities in February this year. The factory, which started producing with three devices in two different categories, plans to produce five devices in three different categories in 2018.

FİGES' 3D Printer will debut at IDEF for the first time and then be presented to the world market at international fairs.

http://men.c4defence.com/Agenda/3d-printer-by-turkish-figes/4316/1

Explanation video from UK

 

[what]

I really hope TÜBITAK is charging some license fee or something for all its know-how, to fund further research.

 

[Silahtar]

Hakan TELISIK
Design Studio Executive
Hidromek HMK600MG won 2nd Design Award!

Our new motor grader “Hidromek HMK 600 MG” has been granted “Red Dot Product Design” award in “vehicle & vehicle accessories” category. And also “HMK 600 MG” had been won “German Design Special” award in “transportation” category.

"Red Dot Best of the Best Design Award" winner "Hidromek HMK 640 WL" at Komatek 2017 exhibition, Ankara Hidromek Design!

 

[xenon54 out]

Hakan TELISIK
Design Studio Executive
Hidromek HMK600MG won 2nd Design Award!

Our new motor grader “Hidromek HMK 600 MG” has been granted “Red Dot Product Design” award in “vehicle & vehicle accessories” category. And also “HMK 600 MG” had been won “German Design Special” award in “transportation” category.

"Red Dot Best of the Best Design Award" winner "Hidromek HMK 640 WL" at Komatek 2017 exhibition, Ankara Hidromek Design!

They look very nice but white on construction machines, i dont know.

 

[damm1t]

Turkish Army Opens Turkey's "Google Earth-like" Software to Public use

A military application which is used by the Turkish military decided to share it with the public. The civilian beta version of the system called " Geoghraphic Analyse System or CAS " will be improved as the users send feedbacks the opinions. As for now users only can access to Turkey map on CAS.

The application can be downloaded from Geographic Maps Command ( HGK ) branch of Turkish army website.

The system uses Göktürk-2 satellite images.

P.S.

Google-Earth’un bir benzeri olan, ancak tamamen milli olarak geliştirilen ve yine içerisinde tamamen milli olarak üretilmiş verilerin yer aldığı yeni uygulamamız 02 Mayıs 2017 tarihinde test amaçlı olarak kullanıma açılmıştır.

Bu uygulama, kullanıma açılmasıyla birlikte çok yoğun talep görmüştür. Elde edilen geri dönüşler neticesinde uygulamanın hızlı ve etkin kullanılabilmesi için sistemin teknik altyapısında iyileştirmeler yapılmaktadır. Uygulamamız Mayıs ayı içerisinde kullanıma açılacaktır.

http://www.hgk.msb.gov.tr/haber-217...stemicasuygulamasi-kullanima-acilmistir-.html

 

[Silahtar]

http://www.aselsan.com.tr/en-us/pre...tomation-Systems/MEDICAL_TECHNOLOGIES_ENG.pdf

http://www.aselsan.com.tr/en-us/press-room/Brochures/Security-Systems/VEGA_ENG.pdf

http://www.aselsan.com.tr/en-us/pre...ANCED_AGRICULTURE_AND_FARMING_SYSTEMS_ENG.pdf

http://www.aselsan.com.tr/en-us/pre...s-and-Automation-Systems/GURU_KOMPAKT_ENG.pdf
http://www.aselsan.com.tr/en-us/pre...nics-and-Automation-Systems/GURU_MINI_ENG.pdf
http://www.aselsan.com.tr/en-us/pre...ics-and-Automation-Systems/GURU_MOBIL_ENG.pdf
http://www.aselsan.com.tr/en-us/pre...nics-and-Automation-Systems/GURU_PIKO_ENG.pdf

 

[damm1t]

http://www.aselsan.com.tr/en-us/pre...tomation-Systems/MEDICAL_TECHNOLOGIES_ENG.pdf

http://www.aselsan.com.tr/en-us/press-room/Brochures/Security-Systems/VEGA_ENG.pdf

http://www.aselsan.com.tr/en-us/pre...ANCED_AGRICULTURE_AND_FARMING_SYSTEMS_ENG.pdf

http://www.aselsan.com.tr/en-us/pre...s-and-Automation-Systems/GURU_KOMPAKT_ENG.pdf
http://www.aselsan.com.tr/en-us/pre...nics-and-Automation-Systems/GURU_MINI_ENG.pdf
http://www.aselsan.com.tr/en-us/pre...ics-and-Automation-Systems/GURU_MOBIL_ENG.pdf
http://www.aselsan.com.tr/en-us/pre...nics-and-Automation-Systems/GURU_PIKO_ENG.pdf

Aselsan bir kadın olsa ona aşık olurdum.

I insist that Aselsan should establish a civilian branch. I believe it can compete brands like Samsung within a quarter and we gain an international brand.

 

[T-123456]

They look very nice but white on construction machines, i dont know.

Its a snow(and ice breaker) machine.

http://www.aselsan.com.tr/en-us/pre...tomation-Systems/MEDICAL_TECHNOLOGIES_ENG.pdf

Wow,didnt know that,Aselsan is really something to be proud of.

 

[xenon54 out]

Its a snow(and ice breaker) machine.

Not the other one in the picture.

Aselsan bir kadın olsa ona aşık olurdum.

Oha len.

 

[T-123456]

Not the other one in the picture.

You are right,didnt see that one.