PAC And HAL Good Paint Job or Workmanship

[KaiserX]

They're not good for anything, not even for their National Day.

View attachment 716534

Incapable. Pathetic.

Wow so pathetic. 1.4 billion bhangees cannot even make a decent plane that can flight. Whereby the JF-17 has been doing fly bys at our national parades for over a decade now

 

[Ghost Hobbit]

And the canopy has a handle attached for the ground crew to open and shut it manually.

View attachment 716533

so you don't want people to open canopy from outside.....?

Wow so pathetic. 1.4 billion bhangees cannot even make a decent plane that can flight. Whereby the JF-17 has been doing fly bys at our national parades for over a decade now

you should probably start looking for its replacement on a priority basis....

 

[Turingsage]

Wrong. The raw sheet metal and alloys are procured against international tenders. Go look at PAC tenders. Also look at the machines at PAC, better than any thing HAL has. Suppose they are just for show.

You call those machines .Hell the body panel round the corner from me has better and modern machines than the clueless screwdrivermen walking about the KAMRA "factory" . It looks like and is a show for the stupid who will swallow any bullshit.

 

[TheSnakeEatingMarkhur]

The metal alloy that JF-17 was made in China. It was rolled into panels in China. It was pressed and shaped in China. It was screwed together partly in China. Final screw and paint in Pakistan

Hopefully you will see the production lime one day

Should I post the pic of JF-17 fitted with Door hinges at the Cockpit canopy? Paintjob? Any aircraft flying faces wear and tear, and paint in some areas start to fade whichever the aircraft is. Wonder how desperate people are to open threads on who paints their aircraft best? PAC or HAL?

Emphasis is on flying mere dost.. 1700hs of Tejas flying vs 19000hs of JF Flying should give you and idea why emphasis on flying is needed here..

And as for JF17 Door hinges they work properly.. thats what they are needed for...

 

[N.Siddiqui]

Indians on PDF, due to their nature, often refer to products such as JF-17 built in Pakistan Aeronautical Complex (PAC) as a mere paint job. Albeit the sheer frustration and heartburn is understandable. However, since the Indians claim that their LCA Tejas is indigenous and pride product of Hindustan Aeronautics Limited (HAL) . Let's compare the two respective aircraft for their paint job and workmanship.

Tejas, Excellent paint job.

View attachment 716514

But a close look at the aircraft reveals some average workmanship.

View attachment 716515

Underneath the aircraft, it seems like patchwork and gun casing and surrounding has very basic if not poor finish.

View attachment 716520

JF-17 Thunder. An Average Paint Job.

View attachment 716521

Workmanship and Finishing.

View attachment 716523

View attachment 716522

JF-17 Gun Port.

View attachment 716525

Hope that clears the doubt as who is good at paint jobs and who is professional in workmanship.

That exposed welding and poor quality paint job of TejAss looks very bad workmanship, any roadside car mechanic in Karachi could have done a better welding and paint job.


Some saner Indians (oxymoron here) waking up to the reality...

 

[TheSnakeEatingMarkhur]

so you don't want people to open canopy from outside.....?

you should probably start looking for its replacement on a priority basis....

And why will we ?

You call those machines .Hell the body panel round the corner from me has better and modern machines than the clueless screwdrivermen walking about the KAMRA "factory" . It looks like and is a show for the stupid who will swallow any bullshit.

Nah its not a show produced by indian media for andhbhakts...

PAC uses state of art machinery to produce JF17 mate... and those are machine not just shown in these old but in videos too.. and please do send those who have modern machines to Tejas production facility too..

 

[Chhatrapati]

Read laugh and move on.

 

[Ghost Hobbit]

That exposed welding and poor quality paint job of TejAss looks very bad workmanship, any roadside car mechanic in Karachi could have done a better welding and paint job.


Some saner Indians (oxymoron here) waking up to the reality...

Tejas uses composites that are baked inside an autoclave...so no we don't need to weld or screw or use hacksaw blades like certain other people

 

[Mrityunjay Rai]

what are the pakistani system in jf17-
A) radar
B)engine
C) missiles
D) not even paint



,

 

[Windjammer]

No need to argue with these simple Sunils since no fighter aircraft is complete without Coconuts and Lemons.

 

[Chhatrapati]

what are the pakistani system in jf17-

Pilot

 

[PAKISTANFOREVER]

The metal alloy that JF-17 was made in China. It was rolled into panels in China. It was pressed and shaped in China. It was screwed together partly in China. Final screw and paint in Pakistan

Is that what they are telling you in the world's biggest FAKE NEWS & PROPAGANDA factory in the world?........ :

Pro-Indian 'fake websites targeted decision makers in Europe' - BBC News

Fake sites and groups lobbying for India influenced decision makers in Europe, researchers say.

www.google.co.uk

265 Indian fake news sites caught pushing anti-Pakistan propaganda

Researchers have discovered a network of 265 fake local news sites across 65 countries that are being used to disseminate anti-Pakistan coverage and serve Indian governmental interests.

thenextweb.com

 

[Windjammer]

Pilot

Guess what mattered at the end of the day.

 

[HostileInsurgent]

10th Jenareshan phaitar taiyyara saarrrrr!!!

And the canopy has a handle attached for the ground crew to open and shut it manually.

View attachment 716533

 

[PAKISTANFOREVER]

Indians on PDF, due to their nature, often refer to products such as JF-17 built in Pakistan Aeronautical Complex (PAC) as a mere paint job. Albeit the sheer frustration and heartburn is understandable. However, since the Indians claim that their LCA Tejas is indigenous and pride product of Hindustan Aeronautics Limited (HAL) . Let's compare the two respective aircraft for their paint job and workmanship.

Tejas, Excellent paint job.

View attachment 716514

But a close look at the aircraft reveals some average workmanship.

View attachment 716515

Underneath the aircraft, it seems like patchwork and gun casing and surrounding has very basic if not poor finish.

View attachment 716520

JF-17 Thunder. An Average Paint Job.

View attachment 716521

Workmanship and Finishing.

View attachment 716523

View attachment 716522

JF-17 Gun Port.

View attachment 716525

Hope that clears the doubt as who is good at paint jobs and who is professional in workmanship.

The shocking thing in ALL of this is that 1.4 billion indians cannot make a fighter jet without MASSIVE help from the West and Russia........