Penguin
ELITE MEMBER
- Joined
- Jan 11, 2009
- Messages
- 13,047
- Reaction score
- 56
Can someone explain why a 40k ton ship is only 25200 ton after fabrication.?
@sancho @Gessler @Penguin
Cochin Shipyard stares at a lean order book - The Hindu
IN GENERAL:
In modern maritime usage, "tonnage" specifically refers to a calculation of the volume or cargo volume of a ship. Tonnage should not be confused with "displacement", which refers to the actual weight of the vessel.
Tonnage - Wikipedia, the free encyclopediaGross tonnage is a function of the volume of all of a ship's enclosed spaces (from keel to funnel) measured to the outside of the hull framing. Net tonnage is based on a calculation of the volume of all cargo spaces of the ship. It indicates a vessel's earning space and is a function of the moulded volume of all cargo spaces of the ship. Gross register tonnage represents the total internal volume of a vessel, where one register ton is equal to a volume of 100 cubic feet (2.83168 m3), a volume that, if filled with fresh water, would weigh around 2,800 kg or 2.8 tonnes. Net register tonnage i the volume of cargo the vessel can carry—that is, the gross register tonnage less the volume of spaces that do not hold cargo (e.g., engine compartment, helm station , and crew spaces, again with differences depending on which port of country does the calculations). It represents the volume of the ship available for transporting freight or passengers
http://en.wikipedia.org/wiki/Displacement_(ship)A ship's displacement or displacement tonnage, a term usually applied only to naval vessels, is the weight of the water that a ship displaces when it is floating. The term is defined ordinarily such that the ship's fuel tanks are full and all stores are aboard. Another way of thinking about displacement is the weight of the water that would spill out of a completely filled container were the ship placed into it.
A number of synonymous terms exist for this maximum weight, such as loaded displacement, full load displacement and designated displacement
Full or deep load or loaded displacement
Full load displacement and loaded displacement have almost identical definitions.
Full load displacement is defined as the displacement of a vessel when floating at its greatest allowable draft as established by classification societies. For warships, an arbitrary full load condition is established.
Deep load condition means full ammunition and stores, with most available fuel capacity used.
Loaded displacement is defined as the weight of the ship including cargo, passengers, fuel, water, stores, dunnage and such other items necessary for use on a voyage, which brings the ship down to its load draft.
Standard displacement
The standard displacement, also known as Washington displacement, is defined as the displacement of the ship complete, fully manned, engined, and equipped ready for sea, including all armament and ammunition, equipment, outfit, provisions and fresh water for crew, miscellaneous stores, and implements of every description that are intended to be carried in war, but without fuel or reserve boiler feed water on board. The omission of fuel and water was to avoid penalizing the British, who had great global commitments and required greater fuel loads, and especially the United States, which had global commitments almost as great but with fewer bases to provide fueling than the Royal Navy.
Light displacement
Light displacement (LDT) is defined as the weight of the ship excluding cargo, fuel, water, ballast, stores, passengers, crew, but with water in boilers to steaming level.
Normal displacement
This rare term has been used to mean the ship's displacement "with all outfit, and two-thirds supply of stores, ammunition, etc., on board.
So, we really should be looking into WEIGHT i.e. DISPLACEMENT. Next you need to determine f the 40k is light, standard or full load displacement. And you need to determine what the 24k is, in that respect.
THIS SPECIFIC ARTICLE:
Cochin Shipyard stares at a lean order book - The HinduThe hull shop, having a capacity to fabricate over 1,500 tonnes every month, has been under-utilised since July last year for want of orders barring the fast patrol vessels (FPVs) for the Coast Guard which need just about 100 tonnes of fabrication apiece and a platform supply vessel for Norwegian owners.
While outfitting and shafting have gathered momentum on Vikrant, the carrier is gearing up for its launch from the building bay by the end of the year, indicate sources.
“The carrier only has about 1,200 tonnes of steel left to go on the structure. Right now, it has a tonnage of about 24,000.”
The yard was pinning it hopes on bagging meaty defence orders like at least one of the four Landing Platform Docks (LPDs), each weighing 20,000 tonnes, that the Indian Navy intends to procure.
I think the article IS referring to weight/displacement. Note furthermore:
http://en.wikipedia.org/wiki/INS_Vikrant_(2013)The ship uses modular construction, with 874 blocks joined together for the hull. By the time the keel was laid, 423 blocks weighing over 8,000 tons had been completed. The construction plan called for the carrier to be launched in 2010, when it would displace some 20,000 tonnes, as a larger displacement could not be accommodated in the building bay. It was planned that after about a year's development in the refit dock, the carrier would be launched when all the major components, including underwater systems, would be in place. Outfitting would then be carried out after launch. As per the Cabinet Committee on Security (CCS), sea trials were initially planned to commence in 2013, with the ship to be commissioned in 2014.
...
On 29 December 2011, the completed hull of the carrier was first floated out of its dry dock at CSL, with its displacement at over 14,000 tonnes. Interior works and fittings on the hull would be carried out until the second half of 2012, when it would again be dry-docked for integration with its propulsion and power generation systems
...
In July 2013, Defense Minister A.K. Anton announced that Vikrant would be launched on 12 August at the Cochin Shipyard. The ship was launched by his wife, Elizabeth Antony, on 12 August 2013. Extensive sea trials are expected to begin in 2016 and the ship will be inducted into the navy by late 2018
According to Vice Admiral Robin Dhowan, about 83% of the fabrication work and 75% of the construction work was complete.
...
After the launch, Vikrant was re-docked for the second phase of construction, in which the ship will be fitted with various weapons and sensors, and the propulsion system, flight deck and the aircraft complex will be integrated
This bolded last bit in part explains the difference between 24k and 40k tons.
India launches first indigenous aircraft carrier INS Vikrant: All you need to know - FirstbizAug 13, 2013
INS Vikrant will have approximate displacement (weight) of 18,500 tonnes at its launch.
So, during the last year about 5500 tons were added. 1200 tons more will be added. Then there may still be some difference, depending on the type of displacement the numbers are actually referrinf to. You need to have the same for both the 24k and the 40k or else compare apples and oranges. I'm inclined to believe 37.5-40k is full load displacement. Not so sure the 24k is that too (probably not, come to think of it). Anyway, you need to at least add the weight of various weapons and sensors, and the propulsion system, flight deck (notably ski-jump). And then add what it carries in terms of stores, ordnance, fuel for its own propulsion and power generation, fuel for its aircraft complement, some drinking water ....
http://www.freewebs.com/jeffhead/worldwideaircraftcarriers/vikrant.htm
Last edited: