What's new

IDEAS 2014 - 8th International Defence Exhibition and Seminar (1 - 4 Dec 2014)

. . . .
Steel Core Designs highlights its SC Thunderbolt sniper rifle range at IDEAS 2014
Steel Core Designs is showcasing a whole range of Thunderbolt sniper rifles during IDEAS 2014, all based on the SC-76 7,62 x 51mm sniper rifle. The whole range uses a rugged, high tensile steel 4-lug bolt, incorporating a new innovative firing pin system. The short firing pin travel enables a very fast 'lock time' (time from pulling the trigger to striking the primer) of around 1.5 milliseconds, vital for making a crucial shot with a long barrel rifle.

Steel_Core_Designs_highlights_its_newest_SC_76_Thunderbolt_7_62_x_51_mm_sniper_rifle_at_IDEAS_2014_640_001.jpg

Steel Core Designs SC-76 Thunderbolt sniper rifle at IDEAS 2014


SCD Thunderbolt heavy recoil plate system is located into both the action body and rifle stock; this is essential for rifle accuracy and greatly assists recoil management. Low friction, wear resistant VDP coatings, reduces the need for lubrication making these weapons ideally suited for the harsh gritty conditions experienced in the deserts; damp dirty conditions of forest and jungle; performing equally well in extreme hot and cold conditions.

The rifle safety lever is incorporated in the trigger mechanism for right handed operation; optionally the safety can be readily adapted for left handed operation when required.

The most critical link between the shooter and the rifle is the trigger. All SCD triggers are designed with two stage operation, 1st and 2nd pull, factory set to a 1.5 kg pull weight for safety, with a crisp, predictable release. Maintenance requirement is minimal, but should the need arise as with all of our designs, it is easy to remove and replace for cleaning.

The main Picatinny scope rail is available with a parallel or angled option to suit the customer requirements. Additional Picatinny rails for the use of ancillary items such as laser illuminators and designators can be easily accommodated as user options. SCD barrels are produced to a very high quality match grade specification, fluted for improved heat dissipation and rifle balance. The barrel is threaded at the muzzle for easy attachment and detachment of the muzzle brake or suppressor.

The SCD designed bipod is fully height adjustable and fits to the forend, maintaining the optimum pivot position around the centreline of the rifle. Thunderbolt's quid release system ensures no tools are required to attach and detach the bipod.

SCD highly efficient muzzle brakes are a standard fitment to all SCD rifles and greatly reduce recoil; this further enhances the shooting experience and improves accuracy.

All SCD rifles feature a folding butt stock as standard for easy bore sighting, cleaning, maintenance and transit. It is also adjustable for length with spacers and incorporates a quick deployment mono pod, fully adjustable with thumbwheel fine adjustment.

Steel Core Designs' unique ambidextrous economically designed rifle stock makes the Thunderbolt a pleasure to use; providing greater shooter comfort, reduced recoil and absorbing vibration; this assists in the quick re-acquisition of target from shot to shot. The innovative use of materials in the stock design such as rubber and aircraft specification alloys, have been proven in extremes of hot and cold operational environments to maintain operation, strength and stability.




Thunderbolt sniper rifle is available in three variants.The SC-76 7.62 x 51 NATO with 10 rounds magazine, which has an engagement range of up to 1,000m with long barrel and up to 600m with short barrel. The SC-86 8.60 x 70 (338 Lap Magnum) with a 10 rounds magazine, which has a maximum engagement range of 1,800m with long barrel and1,250m with short barrel. And finally, the SC-127 12.7 x 99mm (50 BMG), which has a 5 rounds barrel and engagement range up to 2,200m.

All Thunderbolts variants can be fitted with many optional devices, such as tactical day scope and rings, night vision and LADS rails, infra-red and TI sight systems, sound suppressor, etc.
 
.
is it pakistan origion or some other country bt wat so ever it rockssss
 
.
PAK Armoring showcases its new UQAAB multi-purpose armored vehicle at IDEAS 2014
At IDEAS 2014, which started today at Karachi Expo Center (Pakistan), Pakistani company PAK Armoring, specialized in designing and producing customized armored vehicles for multiple purposes, is officially introducing the UQAAB all purpose tactical armored vehicle, specially designed for military personnel and VIP transport.

PAK_Armoring_showcases_its_new_UQAAB_multi_purpose_armored_vehicle_at_IDEAS_2014_640_001.jpg



PAK Armoring new UQAAB multi-purpose tactical armored vehicle at IDEAS 2014


The UQAAB is built on a heavy-duty chassis, equipped with a powerful engine and intelligent AWD system.


Full vehicle is protected with certified CEN B7/NIJ IV armor, which is corresponding to a 7.62 x 51 mm weapon shooting at 30 meters. Armor includes front, sides, rear, roof, and floor, and is designed to resist any incoming threats from any angles. Driver and passengers are completely protected against explosive threats. Add-on armor kit is also available to provide additional protection up to Stanag 4 level (resisting at 14.5x114AP/B32 weapon shooting at 200 meters).

The UQAAB can carry up to 8 soldiers with full equipment, plus driver and co-driver. All seats are equipped with 4-point seat hearnesses. The vehicle has doors at both sides and at the rear of the vehicle. The large ballistic windows provide optimal visibility of external environment. Seating system is designed to protect occupants from IED. Blast attenuation and mitigation technology used for designing the UQAAB minimizes the shockwave and downward forces. Different custom seating are available, according to specific mission requirements.

The UQAAB is also equipped with several armored enhancements, such as a blast mitigation floor mat, and offers many solutions for offensive actions. The vehicle is provided with a roof turret, which can be mounted with remote weapon station, standard .30 or .50 Cal machine guns, or customer specific weapon system. Seven spring loaded gun-ports are integrated at each seat in order to allow defensive actions.

PAK Armoring also ensured crew comfort, thanks to front and rear Heating, Ventilation and Air Conditioning system, 12V electrical system upgradable to 24V, auxiliary fans, automatic fire engine suppression system and heavy duty 300 AMP alternator.
 
.
i think we r capable enough to compete with international standered armoury and all that stuff bt urging on the point that Y the contracts are made with private and international firms lik HINO ISUZU and Mercedez for procurement of all military vehicals which are totally non military vehical . just changing colour cant make it military i think policies should be changed ...........??? can any body put a link of that military vehical made by HIT back in 1995 ?
 
.
A nigga human is always better than a parasite like you.

Being a nigga is not bad after all. :D

You are an insect,a parasite .. You are like a disease spreadig bacteria .. If you had any shame you would get lost ... Alas the concept is foriegn to you.. Keep eating crap.
 
Last edited:
. .
Are there more pics? Thread looks damn barren. Just a couple of heavily modified G3s, MPVs, a JF 17 mockup......

P.S: I understand Pakistanis are excited about this event but some fan boyish claims are quite amusing. Especially with how it's an Israeli - Russian nexus that gets us our aircraft carriers and missiles. refraining from those and instead focusing on thread will be more appropriate.
 
.
This picture is misleading. These are two different vehicles. Upper one is UQAAB by Pak Armouring, down one is SPARTAN by STREIT Group.
Is Thunderbolt Pakistani Gun ?
 
. . . .
Back
Top Bottom