Pakistan's Special Operations Forces: SSG | SSGN | SSW | SOW | SOG

[krash]

Why are you guyz so miserly when it comes to pressing 'thanks'? Bet Iv posted many pics you hadnt ever seen

 

[GHOST RIDER]

Why are you guyz so miserly when it comes to pressing 'thanks'? Bet Iv posted many pics you hadnt ever seen

Wel i got some thanks

 

[S-A-B-E-R->]

Vests are also being manufactured here. But most of the front line troops currently deployed in the WOT are using american made vests. Apparently theres a problem with our vests. The synthetic fiber that is used in making the pockets for the plates gets worn out too quickly when used heavily and too roughly, or so iv heard.

yes but have u seen those specific vests in the pic?

 

[GHOST RIDER]

Amjad Razzaq Shaheed

 

[krash]

yes but have u seen those specific vests in the pic?

Dont know cause they dont look very different from the imported ones but I have seen them in person. Here is one being produced by ZA Engineering Works:

Another one by Lyra (Private) Limited:

There are more.

 

[S-A-B-E-R->]

^^can u show all the pics u have of pakistani BPVs
thnx

 

[krash]

So are these Pakistani or FrencH????????/

Yes they are Pakistani, if you can take my word for it.

^^can u show all the pics u have of pakistani BPVs
thnx

The following is the standard for our troops:

Description

The Advanced Composites Research Center at Air Weapons Complex has carried out extensive research on bullet-proof materials. Using indigenous technology, AWC has developed lightweight composite Bullet-proof Jackets and Helmets that provide exceptional battlefield protection. At the same time, the unique design features facilitate body and head movement while aiming, crawling and running.
The Bullet-proof Jackets and Helmets developed by AWC provide protection against ammunition according to NIG Standard 0101.03.

Bullet-Proof Helmet (Level III A)

Specific layers of biaxial woven kevlar fabric have been integrated in polymeric resin. The fabric/resin has been cured in a specific mould under high temperature and pressure for specific time duration. After de-molding, trimming and painting, webbing is attached to the Helmet.

Bullet-Proof Jacket (Level III A & Level III)

Specific layers of biaxial woven kevlar fabric have been stitched in diamond pattern. The trauma pack is an integral part of the ballistic insert. The assembly is stitched in water/moisture-resistant black plastic to maintain its ballistic properties. This effectively stops the 9mm bullet. The Jacket can stop the 7.62mm bullet after insertion of front and back laminated ceramic plate. The outer cover is made of washable 100% cotton camouflage twill.

advantages of kevlar fabric

* High tensile strength/modules
* High toughness
* Light weight
* Excellent retention of strength at elevated temperatures
* High thermal stability
* Self extinguishing
* Cut resistant
* Good chemical resistance

test firing

Bullet-Proof Helmet

The Helmet was fired at from a distance of 5m by 9mm caliber sub-machine gun ammunition at ballistic test facilities of Air Weapons Complex and Inspectorate of Armaments, Rawalpindi, in accordance with NIJ standard 0101.01. The Helmet stopped the bullet effectively. The average trauma effect was found to be within limits. The Helmet was also tested under wet conditions. The wet tests did not deteriorate the results.

Bullet-Proof Jacket

The Jacket was fired at from a distance of 5m by 9mm and 7.62mm caliber ammunition at ballistic test facilities of Air Weapons Complex and Inspectorate of Armaments, Rawalpindi, in accordance with NIJ standard 0101.01. The Jacket stopped both types of bullets effectively with nominal trauma effect.

salient features

Bullet-Proof Helmet

* Protection Level III A (against 9mm ammunition)
* Material Kevlar
* Resin Material Polymeric
* Color Optional
* Webbing Cotton
* Ballistic Visor Optional
* Weight 1.4 Kg

Bullet-Proof Jacket

* Protection Level
Without Ceramic plate III A (against 9mm ammunition)
With Ceramic plate III(against7.62mm ammunition)
* Material Kevlar
* Trauma Pack Polymeric
* Ballistic Insert Laminated Ceramic
* Outer Cover Camouflage Khaki Twill
* Collars Integrated
* Pelvic Flaps Optional
* Weight 2.8 Kg

(Courtesy Wilco and Sir Champ)



another one (BVP-37):

This one is made by Capital Services System:

These are the ones I could find for now. Plus lets not further derail the thread bro.

ps: an Interesting thing I just read. The army uniforms are soon going to be changed with new gadgets coming in as well. Check what Santro and Xeric had to say here: http://www.defence.pk/forums/land-forces/114555-pak-army-uniform.html

 

[GHOST RIDER]

Okay waiting.Why aren't there any other photos of these guys anywhere else?

When was this taken, who are the suited guys and who is the lady?

One suited guy in the left side of the lady is our interriour minister Rehman malik

 

[Kompromat]

 

[osamaziadxb]

very cool thread

 

[saumyasupratik]

Funny this pic also comes in many National Security Guards Photo Albums in many forums.

 

[Ahmad Abdullah Ravian]

O my God , very exiting Pictures ,Thanks to all Members
Well if we are not in SSG , we must at least think and act like SSG Commandos (I think you understand my view)
The Devotion ,Discipline, Capability, Courage, Self-Control,Activeness,Patriotism,...etc must be part of a personality of every Young of PAKISTAN

 

[salvage]

General Gul Hassan Khan congratulating SSG commandos on the successful accomplishment of raid behind indian lines

Gul Hassan Khan in 1948 as Adjutant Probyn’s Horse

 

[S-A-B-E-R->]

Funny this pic also comes in many National Security Guards Photo Albums in many forums.

i have seen this pic on a wall in when i was on Faseel-e-Jaan Se Aagay promo and it was by ISPR without the sologan so i think its pakistani

 

[krash]

Guys just landed on hundreds of never before seen SSG pics. Waiting for the permission of the person who took them to upload here.