Pakistan Army's VT-4 Main Battle Tank | Updates & Discussions
- Thread starter SBUS-CXK
- Start date
HRK
PDF THINK TANK: CONSULTANT
- Joined
- Sep 24, 2010
- Messages
- 14,108
- Reaction score
- 122
- Country
- Location
and understandably don't speak .... as its against their professional ethics ....
BUT they should at least call a fake news/ propaganda as false which will reduce the fake news .... its OK not to release any news or inside info but those false news reports create negative impact so must be countered ....
only few around 3-4 member of the forum who where ex-servicemen had this approche but nowaday none of them is active anymore ....
Daniel808
SENIOR MEMBER
- Joined
- Nov 24, 2013
- Messages
- 4,960
- Reaction score
- -8
- Country
- Location
Pakistan is the buyer.
Credit to @LKJ86 from Chinese Defence Forum Section
Latest VT4 battle tanks delivered to foreign buyer: report
Source:Globaltimes.cn Published: 2020/4/27 2:24:48
A Thai army's newly purchased Chinese-manufactured VT4 main battle tank deploys during a simulated warfare exercise at the Royal Thai Army Cavalry Center in Saraburi Province, Thailand, in 2018. File Photo: IC
China is delivering two customized VT4 main battle tanks to an undisclosed foreign buyer.
Transported by trucks, two VT4 tanks left for their destination following a launch ceremony, Weihutang, military affairs column affiliated with China Central Television, reported on Friday, citing a video released by the Inner Mongolia First Machinery Group under the state-owned China North Industries Group (NORINCO).
The tanks are not the standard VT4 version and instead are equipped with a different turret boost design. The front design features a new explosive reactive armor, Weihutang said.
This upgraded VT4 offers enhancements with extra protection capabilities, the report said, citing military experts.
Further details on the deal have not been released, such as the purchase amount, overall value, and client name.
Also known as the MBT3000, the VT4 is a new generation of made-for-export combat tank designed for the international market, Weihutang said, noting that it is one of the most popular Chinese weapons available and has been sold to Thailand and Nigeria.
The VT4 is equipped with a 125-millimeter smoothbore gun, can fire armor-piercing fin-stabilized discarding-sabot (APFSDS), high explosive anti-tank cartridges, and missiles with a 5-kilometer range.
Equipped with a China-made 1,200-horsepower diesel-fueled engine and a hydromechanical drive system, the VT4 can travel at a maximum speed of 70 kph and a maximum cross-country speed of 50 kph.
http://www.globaltimes.cn/content/1186834.shtml
Congrats for Pakistan, they get the most latest version of VT-4 MBT
Chinese VT4 tank fitted with FY-IV ERA Explosive Reactive Armour against Tandem Warhead ammunition
POSTED ON FRIDAY, 24 APRIL 2020 15:41
According to new pictures published on April 22, 2020, to the China Defense Blog, the latest version of Chinese-made Main Battle Tank (MBT) VT4 is now protected with new armor ERA (Explosive Reactive Armor) Level FY-4 providing protection against Tandem Warhead ammunition. According to our previous analysis, the first version of the VT-4 MBT was fitted with ERA level FY-2.
Chinese VT4 main battle tank with ERA armor Level FY-IV mounted at the front of the hull. (Picture source China Defense Blog)
The VT4 MBT (Main Battle Tank) is now in service with four armed forces in the world including China, Nigeria, Pakistan, and Thailand. The VT4 also called MBT-3000 is a third-generation Main Battle Tank (MBT) designed, developed and manufactured in China by NORINCO (China North Industries Corporation).
The VT4 MBT was unveiled by the Chinese defense industry in November 2019 during the China International Aviation & Aerospace or Zhuhai AirShow. The layout of this tank is very similar to the Russian tank with a crew of three including driver, commander and gunner and the use of an automatic loading system for the main armament.
The main armament of the VT4 / MBT-3000 consists of a 125 mm smoothbore gun fitted with a thermal sleeve and fume extractor. It is fed by an automatic loader that holds a total of 22 projectiles and charges which can be loaded at the rate of eight per minute. One 7.62 mm coaxial machine gun is mounted to the right of the main armament, while on the commander's cupola is mounted a remote weapon station armed with a 12.7mm heavy machine gun that can be used to engage ground and aerial targets.
The hull and turret of the VT4 are of welded steel construction with a layer of composite armor over the front arc. The first version of the tank was fitted with additional ERA (Explosive Reactive armor) Level FY-2 providing protection against HEAT (High-Explosive Anti-Tank) and APFSDS (Armour-Piercing Fin-Stabilized Discarding Sabot) ammunition. According to the latest pictures released on the Internet, the latest variant of the VT4 is now fitted at the front of the hull with ERA armor Level FY-4 providing protection against Tandem Warhead.
Close view of the ERA armor Level FY-IV mounted at the front of the VT4 main battle tank (Picture source China Defense Blog)
Currently, China produces four Level of ERA armour including the FY-I with protection against HEAT ammunition, the FY-II with protection against HEAT, APFSDS ammunition, the FY-III with protection against HEAT, APFSDS and tandem warhead ammunition and the FY-IV providing protection against HEAT, APFSDS and tandem warhead ammunition but with 85 mm thick armour blocks for the FY-IV and only 75 mm for Level III. The ERA armour consists of steel blocks with C4 explosives inside.
Reactive armour is a type of vehicle armour that reacts in some way to the impact of a weapon to reduce the damage done to the vehicle being protected. It is most effective in protecting against shaped charges and specially hardened kinetic energy penetrators. The most common type is explosive reactive armour (ERA), but variants include self-limiting explosive reactive armour (SLERA), non-energetic reactive armour (NERA), non-explosive reactive armour (NxRA), and electric reactive armour.
A high-explosive anti-tank (HEAT) warhead is a type of shaped charge explosive that uses the Munroe effect to penetrate thick tank armor. Armour-piercing fin-stabilized discarding sabot (APFSDS) is a type of kinetic energy penetrator ammunition used to attack modern vehicle armour. As an armament for main battle tanks, it succeeds armour-piercing discarding sabot (APDS) ammunition, which is still used in small or medium caliber weapon systems.
Tandem warheads are effective against reactive armour, which is designed to protect an armoured vehicle (mostly tanks) against anti-tank ammunition, missiles and rocket. The first stage of the weapon is typically a weak charge that either pierces the reactive armour of the target without detonating it leaving a channel through the reactive armour so that the second warhead may pass unimpeded, or simply detonating the armour plates causing the timing of the counter-explosion to fail. The second detonation from the same projectile attacks the same location as the first detonation where the reactive armour has been compromised. Since the regular armour plating is often the only defence remaining, the main charge (second detonation) has an increased likelihood of penetrating the armour.
Chinese-made ERA armour level (Picture source Twitter)
https://www.armyrecognition.com/wea...armour_against_tandem_warhead_ammunition.html
Credit to @LKJ86 from Chinese Defence Forum Section
Latest VT4 battle tanks delivered to foreign buyer: report
Source:Globaltimes.cn Published: 2020/4/27 2:24:48
A Thai army's newly purchased Chinese-manufactured VT4 main battle tank deploys during a simulated warfare exercise at the Royal Thai Army Cavalry Center in Saraburi Province, Thailand, in 2018. File Photo: IC
China is delivering two customized VT4 main battle tanks to an undisclosed foreign buyer.
Transported by trucks, two VT4 tanks left for their destination following a launch ceremony, Weihutang, military affairs column affiliated with China Central Television, reported on Friday, citing a video released by the Inner Mongolia First Machinery Group under the state-owned China North Industries Group (NORINCO).
The tanks are not the standard VT4 version and instead are equipped with a different turret boost design. The front design features a new explosive reactive armor, Weihutang said.
This upgraded VT4 offers enhancements with extra protection capabilities, the report said, citing military experts.
Further details on the deal have not been released, such as the purchase amount, overall value, and client name.
Also known as the MBT3000, the VT4 is a new generation of made-for-export combat tank designed for the international market, Weihutang said, noting that it is one of the most popular Chinese weapons available and has been sold to Thailand and Nigeria.
The VT4 is equipped with a 125-millimeter smoothbore gun, can fire armor-piercing fin-stabilized discarding-sabot (APFSDS), high explosive anti-tank cartridges, and missiles with a 5-kilometer range.
Equipped with a China-made 1,200-horsepower diesel-fueled engine and a hydromechanical drive system, the VT4 can travel at a maximum speed of 70 kph and a maximum cross-country speed of 50 kph.
http://www.globaltimes.cn/content/1186834.shtml
Congrats for Pakistan, they get the most latest version of VT-4 MBT
Chinese VT4 tank fitted with FY-IV ERA Explosive Reactive Armour against Tandem Warhead ammunition
POSTED ON FRIDAY, 24 APRIL 2020 15:41
According to new pictures published on April 22, 2020, to the China Defense Blog, the latest version of Chinese-made Main Battle Tank (MBT) VT4 is now protected with new armor ERA (Explosive Reactive Armor) Level FY-4 providing protection against Tandem Warhead ammunition. According to our previous analysis, the first version of the VT-4 MBT was fitted with ERA level FY-2.
Chinese VT4 main battle tank with ERA armor Level FY-IV mounted at the front of the hull. (Picture source China Defense Blog)
The VT4 MBT (Main Battle Tank) is now in service with four armed forces in the world including China, Nigeria, Pakistan, and Thailand. The VT4 also called MBT-3000 is a third-generation Main Battle Tank (MBT) designed, developed and manufactured in China by NORINCO (China North Industries Corporation).
The VT4 MBT was unveiled by the Chinese defense industry in November 2019 during the China International Aviation & Aerospace or Zhuhai AirShow. The layout of this tank is very similar to the Russian tank with a crew of three including driver, commander and gunner and the use of an automatic loading system for the main armament.
The main armament of the VT4 / MBT-3000 consists of a 125 mm smoothbore gun fitted with a thermal sleeve and fume extractor. It is fed by an automatic loader that holds a total of 22 projectiles and charges which can be loaded at the rate of eight per minute. One 7.62 mm coaxial machine gun is mounted to the right of the main armament, while on the commander's cupola is mounted a remote weapon station armed with a 12.7mm heavy machine gun that can be used to engage ground and aerial targets.
The hull and turret of the VT4 are of welded steel construction with a layer of composite armor over the front arc. The first version of the tank was fitted with additional ERA (Explosive Reactive armor) Level FY-2 providing protection against HEAT (High-Explosive Anti-Tank) and APFSDS (Armour-Piercing Fin-Stabilized Discarding Sabot) ammunition. According to the latest pictures released on the Internet, the latest variant of the VT4 is now fitted at the front of the hull with ERA armor Level FY-4 providing protection against Tandem Warhead.
Close view of the ERA armor Level FY-IV mounted at the front of the VT4 main battle tank (Picture source China Defense Blog)
Currently, China produces four Level of ERA armour including the FY-I with protection against HEAT ammunition, the FY-II with protection against HEAT, APFSDS ammunition, the FY-III with protection against HEAT, APFSDS and tandem warhead ammunition and the FY-IV providing protection against HEAT, APFSDS and tandem warhead ammunition but with 85 mm thick armour blocks for the FY-IV and only 75 mm for Level III. The ERA armour consists of steel blocks with C4 explosives inside.
Reactive armour is a type of vehicle armour that reacts in some way to the impact of a weapon to reduce the damage done to the vehicle being protected. It is most effective in protecting against shaped charges and specially hardened kinetic energy penetrators. The most common type is explosive reactive armour (ERA), but variants include self-limiting explosive reactive armour (SLERA), non-energetic reactive armour (NERA), non-explosive reactive armour (NxRA), and electric reactive armour.
A high-explosive anti-tank (HEAT) warhead is a type of shaped charge explosive that uses the Munroe effect to penetrate thick tank armor. Armour-piercing fin-stabilized discarding sabot (APFSDS) is a type of kinetic energy penetrator ammunition used to attack modern vehicle armour. As an armament for main battle tanks, it succeeds armour-piercing discarding sabot (APDS) ammunition, which is still used in small or medium caliber weapon systems.
Tandem warheads are effective against reactive armour, which is designed to protect an armoured vehicle (mostly tanks) against anti-tank ammunition, missiles and rocket. The first stage of the weapon is typically a weak charge that either pierces the reactive armour of the target without detonating it leaving a channel through the reactive armour so that the second warhead may pass unimpeded, or simply detonating the armour plates causing the timing of the counter-explosion to fail. The second detonation from the same projectile attacks the same location as the first detonation where the reactive armour has been compromised. Since the regular armour plating is often the only defence remaining, the main charge (second detonation) has an increased likelihood of penetrating the armour.
Chinese-made ERA armour level (Picture source Twitter)
https://www.armyrecognition.com/wea...armour_against_tandem_warhead_ammunition.html
PanzerKiel
MILITARY PROFESSIONAL
- Joined
- Dec 5, 2006
- Messages
- 4,205
- Reaction score
- 199
- Country
- Location
Joe Shearer
PROFESSIONAL
- Joined
- Apr 19, 2009
- Messages
- 27,493
- Reaction score
- 162
- Country
- Location
Pakistani Fighter
ELITE MEMBER
- Joined
- Jul 4, 2011
- Messages
- 9,124
- Reaction score
- -5
ARMalik
SENIOR MEMBER
- Joined
- Dec 7, 2017
- Messages
- 6,046
- Reaction score
- -7
- Country
- Location
VT-4
April 20, 2020
View attachment 627671
View attachment 627672
View attachment 627673
Via @魅力一机 from Weixin
On the way to Pakistan from Northern China
Sorry dude, you are already 61 pages late.
zhxy
FULL MEMBER
- Joined
- Mar 15, 2020
- Messages
- 1,426
- Reaction score
- -22
- Country
- Location
China develops VT-4 because it wants to export VT-4 to Saudi Arabia and many other countries in the Middle East.
1. Middle east countries in recent years have imported a lot of weapons . They are potential customers
2. VT-4 is equipped with air conditioning and APS system. (suitable for climate and war in the Middle East)
3. Pakistan has manufactured many AK tanks. Most likely, Pakistan will choose to upgrade and modernize MBT. They do not want to buy new tanks to save money, in case they want to buy a new one, the quantity is very small.
1. Middle east countries in recent years have imported a lot of weapons . They are potential customers
2. VT-4 is equipped with air conditioning and APS system. (suitable for climate and war in the Middle East)
3. Pakistan has manufactured many AK tanks. Most likely, Pakistan will choose to upgrade and modernize MBT. They do not want to buy new tanks to save money, in case they want to buy a new one, the quantity is very small.
From the description from Chinese side. Rich Arabs countries are footing the bill but tank is send to PA...
Something like Egypt Mistral class. It also mention PA is in urgent need of new tank. Sounds like something big is brewing. It seems like front line is very tense and they are sensing something big may broke out if nothing is done to remedy the balance.
Something like Egypt Mistral class. It also mention PA is in urgent need of new tank. Sounds like something big is brewing. It seems like front line is very tense and they are sensing something big may broke out if nothing is done to remedy the balance.
PanzerKiel
MILITARY PROFESSIONAL
- Joined
- Dec 5, 2006
- Messages
- 4,205
- Reaction score
- 199
- Country
- Location
You'll be surprised.....a whole formation is being renewed!!!
Pakistani Fighter
ELITE MEMBER
- Joined
- Jul 4, 2011
- Messages
- 9,124
- Reaction score
- -5
So Pakistan has gotten all 300 Tanks?
Daniel808
SENIOR MEMBER
- Joined
- Nov 24, 2013
- Messages
- 4,960
- Reaction score
- -8
- Country
- Location
I wonder about the price.
Thailand first batch have $5.5 Million price tag for each unit
Meanwhile, this Pakistan version is more deadly than Thailand and Nigerian version.
That thread discuss VT-4 trial/test in Pakistan, meanwhile this time we got confimed news
Thailand first batch have $5.5 Million price tag for each unit
Meanwhile, this Pakistan version is more deadly than Thailand and Nigerian version.
That thread discuss VT-4 trial/test in Pakistan, meanwhile this time we got confimed news
I am not sure but we need to fulfill Nigeria army order too so it will not be that fast.
Pakistani Fighter
ELITE MEMBER
- Joined
- Jul 4, 2011
- Messages
- 9,124
- Reaction score
- -5
Comparisons of them plz
Similar threads
Latest posts
-
Bajwa calls Bushra's allegations against Saudi Arabia 'baseless'
- Latest: Novus ordu seclorum
-
-
-
-
Pakistan Affairs Latest Posts
-
Bajwa calls Bushra's allegations against Saudi Arabia 'baseless'
- Latest: Novus ordu seclorum
-
-
-
-
