MADE IN PAKISTAN: Making Pakistan Proud.

[gslv mk3]

then why dont i show u the wrath of mods.....@waz he is trolling/off topic

And who started trolling dragging India into a totally unrelated topic ?

 

[Tamil_Manithan]

Till now and for past 2 years, we r the only member from Asia in CERN

Pakistan is not a member it just a associate member.
What is your defination of Asia?
Israel is a full member and Turkey is a associate member. Are they not in Asia?

 

[Raul_AD]

wikipedia isnt a source, probably this page wasnt updated refer to post#23


Yup hence rejected. Remember that yr applying for its membership since atleast 2012, which is atleast 1 year before we first applied 2013.

For your kind perusal the contribution by India to CERN is as below. Hope you appreciate it.

Good Day.

https://www.researchgate.net/public...on_Collider_under_construction_at_CERN_Geneva
Indian contributions


The in-kind contributions that DAE committed to CERN involve hardware, software as well as skilled manpower support. The hardware supply has opened a door for Indian industry to take up the chal-
lenge of delivering high-quality products for a cutting-edge international research project. CAT, Indore with a major programme in accelerators, is the nodal DAE agency which has the responsibility to carry out necessary R&D work to prototype and develop the components, so as to meet the given specifications before their large-scale production can be entrusted to industry. A Coordination Com-
mittee constituted by Secretary, DAE coordinates the collaboration with CERN. A joint India–CERN Committee oversees the implementation of this collaboration and the Government of India has provi-
ded the necessary budget to DAE for executing this work.

From the beginning of this collaboration, it was felt that India should make contributions in those domains which involve high technology and, as far as possible, in a cost-effective manner that is consistent with the policy of CERN to distribute a mix of all types of work–industrial, workmen-intensive, high-tech related, software and even conventional items – amongst CERN members and
NMS. During the initial four-year period, based on a series of technical discussions between DAE and CERN, the following items of delivery by India were identified:

(i) superconducting corrector magnets – sextupoles (MCS), decapoles (MCD) and octupoles (MCO);
(ii) mechanical systems, namely precision magnet positioning system-jacks (PMPS-jacks);
(iii) accelerator protection system – quench protection heater power supply (QPS), quench detection electronics (QDE) and control electronics for high current circuit breakers;
(iv) vacuum system – vacuum system design for long beam transport lines for beam dumps;
(v) cryogenics – large capacity liquid nitrogen tanks and test facility for testing of Sc magnets at 4.2 K;
(vi) engineering studies – analysis of cryogenic distribution line interconnects and test and analysis for magnets along with necessary technical documentation;
(vii) software – SCADA for industrial systems, database software, web interface and LHC machine control software;
(viii) skilled manpower for test and evaluation of a variety of cryo-magnets at CERN.

The above-listed job elements are being pursued in different units of DAE. CAT is involved with (i), (ii), (iv), (v) and (vi) above; BARC and Electronics Corporation of India Ltd (ECIL) are associated with (iii) and (vii); and CAT, BARC, VECC and IGCAR are pooling necessary skilled engineers and physicists for (viii). Figure 1 shows LHC String-2 at CERN, where we have identified some of the major hardware contributions from India.

Technical details of specific items being contributed

Superconducting corrector magnets (MCS and MCDO)3

Dipoles and quadrupoles are the principal magnets of the LHC. Dipoles bend the charged particle beams in a circular path through the accelerator’s 27-km ring, while quadrupoles focus them tightly. The main dipoles of LHC are equipped with sextupolar and decapolar (MCD) corrector magnets (MCS and MCD). Each decapole corrector also has an octupolar insert (MCO), and together are designated as MCDO. In all, 2464 MCS and 1232 MCDO assemblies are required for the LHC. (For logistic reasons CERN decided to procure these magnets from two different sources, one from India and the other from within Europe. Thus India’s share of supply is half, i.e. 1232 MCS and 616 MCDO corrector magnets.) Each corrector magnet consists of an Sc coil assembly, glass fibre slit tube, steel lamination, aluminium shrinking cylinder for pre-compression of coils, end plates for connection, parallel resistor for magnet protection and a magnetic shield also acting as a support. The coils are wound from solid rectangular Sc wire of niobium-titanium in a copper matrix. The coils in each corrector are connected in series and the ends are connected to the leads for connection to the power supply. These connections are made by the ultra-sonic weld technique, which results in low joint resistance. A number of prototypes of MCS, MCD and MCO were made and tested at CAT, at room temperature and at 4.2 K to finalize their engineering design, and special techniques were developed for production.

 

[swnjo]

how much money a associate member have to give per year to CERN?

 

[gslv mk3]

how much money a associate member have to give per year to CERN?

$10 million.

 

[Yogijaat]

Till now and for past 2 years, we r the only member from Asia in CERN

All power to you mate
Make Asia proud

 

[Umair Nawaz]

And who started trolling dragging India into a totally unrelated topic ?

read the OP u moron! this thread was addressed to Acknowledge and Razia Sultana. Its u who jumped into it!!!!!

Now buzz off.

For your kind perusal the contribution by India to CERN is as below. Hope you appreciate it.

Good Day.

https://www.researchgate.net/public...on_Collider_under_construction_at_CERN_Geneva
Indian contributions


The in-kind contributions that DAE committed to CERN involve hardware, software as well as skilled manpower support. The hardware supply has opened a door for Indian industry to take up the chal-
lenge of delivering high-quality products for a cutting-edge international research project. CAT, Indore with a major programme in accelerators, is the nodal DAE agency which has the responsibility to carry out necessary R&D work to prototype and develop the components, so as to meet the given specifications before their large-scale production can be entrusted to industry. A Coordination Com-
mittee constituted by Secretary, DAE coordinates the collaboration with CERN. A joint India–CERN Committee oversees the implementation of this collaboration and the Government of India has provi-
ded the necessary budget to DAE for executing this work.

From the beginning of this collaboration, it was felt that India should make contributions in those domains which involve high technology and, as far as possible, in a cost-effective manner that is consistent with the policy of CERN to distribute a mix of all types of work–industrial, workmen-intensive, high-tech related, software and even conventional items – amongst CERN members and
NMS. During the initial four-year period, based on a series of technical discussions between DAE and CERN, the following items of delivery by India were identified:

(i) superconducting corrector magnets – sextupoles (MCS), decapoles (MCD) and octupoles (MCO);
(ii) mechanical systems, namely precision magnet positioning system-jacks (PMPS-jacks);
(iii) accelerator protection system – quench protection heater power supply (QPS), quench detection electronics (QDE) and control electronics for high current circuit breakers;
(iv) vacuum system – vacuum system design for long beam transport lines for beam dumps;
(v) cryogenics – large capacity liquid nitrogen tanks and test facility for testing of Sc magnets at 4.2 K;
(vi) engineering studies – analysis of cryogenic distribution line interconnects and test and analysis for magnets along with necessary technical documentation;
(vii) software – SCADA for industrial systems, database software, web interface and LHC machine control software;
(viii) skilled manpower for test and evaluation of a variety of cryo-magnets at CERN.

The above-listed job elements are being pursued in different units of DAE. CAT is involved with (i), (ii), (iv), (v) and (vi) above; BARC and Electronics Corporation of India Ltd (ECIL) are associated with (iii) and (vii); and CAT, BARC, VECC and IGCAR are pooling necessary skilled engineers and physicists for (viii). Figure 1 shows LHC String-2 at CERN, where we have identified some of the major hardware contributions from India.

Technical details of specific items being contributed

Superconducting corrector magnets (MCS and MCDO)3

Dipoles and quadrupoles are the principal magnets of the LHC. Dipoles bend the charged particle beams in a circular path through the accelerator’s 27-km ring, while quadrupoles focus them tightly. The main dipoles of LHC are equipped with sextupolar and decapolar (MCD) corrector magnets (MCS and MCD). Each decapole corrector also has an octupolar insert (MCO), and together are designated as MCDO. In all, 2464 MCS and 1232 MCDO assemblies are required for the LHC. (For logistic reasons CERN decided to procure these magnets from two different sources, one from India and the other from within Europe. Thus India’s share of supply is half, i.e. 1232 MCS and 616 MCDO corrector magnets.) Each corrector magnet consists of an Sc coil assembly, glass fibre slit tube, steel lamination, aluminium shrinking cylinder for pre-compression of coils, end plates for connection, parallel resistor for magnet protection and a magnetic shield also acting as a support. The coils are wound from solid rectangular Sc wire of niobium-titanium in a copper matrix. The coils in each corrector are connected in series and the ends are connected to the leads for connection to the power supply. These connections are made by the ultra-sonic weld technique, which results in low joint resistance. A number of prototypes of MCS, MCD and MCO were made and tested at CAT, at room temperature and at 4.2 K to finalize their engineering design, and special techniques were developed for production.

yes dude, thats ll is as a mere observer member, that way even China and japan also have their share of contributions. We arnt discussing all the contributions of even Pakistan in the project but some of them which r latest! as an associated member!!!

read the OP.

 

[Raul_AD]

read the OP u moron! this thread was addressed to Acknowledge and Razia Sultana. Its u who jumped into it!!!!!

Now buzz off.

Mentioning India in the manner you did attracted all the replies we are not concerned what Pakistan achieved it it good for Pakistan.

India is not concerned with it.

 

[Waqas Bin Adam]

Ahhh I guess you forgot to mention the proud makeup products that we make in here...

LOL, but it does not count in tech

 

[Umair Nawaz]

we r actually manufacturing this thing. out of 300RPCs 245 r build by us with 43 spares etc etc.

 

[gslv mk3]

read the OP u moron! this thread was addressed to Acknowledge and Razia Sultana. Its u who jumped into it!!!!!

What does that has to do with that thread.

yes dude, thats ll is as a mere observer member, that way even China and japan also have their share of contributions

As a 'mere' observer, India has made far more contributions to CERN.

 

[Umair Nawaz]

Mentioning India in the manner you did attracted all the replies we are not concerned what Pakistan achieved it it good for Pakistan.

India is not concerned with it.

lol because these two members compared pakistan with bangladesh the other day. Go through the thread.

 

[Raul_AD]

read the OP u moron! this thread was addressed to Acknowledge and Razia Sultana. Its u who jumped into it!!!!!

Now buzz off.


yes dude, thats ll is as a mere observer member, that way even China and japan also have their share of contributions. We arnt discussing all the contributions of even Pakistan in the project but some of them which r latest! as an associated member!!!

read the OP.

Man we are not in dick measuring contest. Enjoy your endeavors.

India has its own sphere of engagements which is no way have any thing to do with Pakistan.

 

[Umair Nawaz]

What does that has to do with that thread.



As a 'mere' observer, India has made far more contributions to CERN.

im sure it did, which wasnt enough quality wise to be included as an associate membership....

Anyways i appreciate that well done

Now buzz off.

Man we are not in dick measuring contest. Enjoy your endeavors.

India has its own spare of engagements which is no way have any thing to do with Pakistan.

i wish if world was so simplistic...anyways goodluck.

 

[Raul_AD]

lol because these two members compared pakistan with bangladesh the other day. Go through the thread.

Well you have to appreciate that Bangladesh is doing good and in many ways in uplifting their society from poverty.

They are in many sense better then Pakistan.