Made in India

[Sashan]

Oracle Financial Services Software Limited formerly called Iflex is a major software product/company from India - Acquired by Oracle corp now and operate as a subsidiary of Oracle. I would say one of the few significant products of Indian IT industry.

 

[Water Car Engineer]

Smaller satellites made by the youth of India. Launched by ISRO.

SRMSAT is a miniaturized satellite built by students at Sri Ramaswamy Memorial University in India. It was launched from the Indian Space Research Organization's Satish Dhawan Space Centre at Sriharikota in October 2011 atop a PSLV-C18 rocket. The satellite is an Indian technology demonstration and Earth observation satellite which will be operated by the SRM Institute of Science and Technology. This nanosatellite will be used to monitor Greenhouse gases in atmosphere. It is a 10.4-kilogram (23 lb) spacecraft, which measures 28 centimetres (11 in) in length by 28 centimetres (11 in) in height and width. Its development programme cost around 1.5 crore rupee. It has a design life of one year. The launch was a multi-payload mission shared with Megha-Tropiques, VesselSat-1 and Jugnu.
SRMSAT is controlled by a 28.8 MHz Atmel microcontroller. Communication is via UHF, with a downlink at 437.5 MHz providing a data rate of 2.4 kbps and an uplink at 145.9 MHz with a 1 kbps data rate. Attitude control is via an on-board magnetometer and GPS receiver that provide data for magnetorquer coils which interact with the Earth's magnetosphere to change the satellite's orientation.
SRMSAT's primary mission is the development of a nanosatellite platform for future missions. Its secondary mission is the monitoring of greenhouse gasses using an Argus spectrometer.

Jugnu is a 3U-cubesat built by the Indian Institute of Technology Kanpur.

The 3 kg nanosatellite will be used to provide data for agriculture and disaster monitoring. Jugnu has a design life of one year.

Jugnu's carries the Micro Imaging System, a near infrared camera which will be used to observe vegetation. Also on board is a GPS receiver to aid tracking, and is intended to demonstrate a microelectromechanical inertial measurement unit.

The Anna University Satellite, or ANUSAT is an Indian student research microsatellite designed, developed & integrated at Aerospace Engineering, Madras Institute of Technology(MIT), Chromepet, Anna University. It carries an amateur radio and technology demonstration experiments. It was successfully launched aboard a PSLV-CA designated PSLV-C12, along with RISAT-2, from the Second Launch Pad at the Satish Dhawan Space Centre. The launch was carried out at 01:15 GMT (06:45 IST) on 20 April 2009.

StudSat is a student satellite conceptualised, designed and project managed by undergraduate students across India. It is a picosatellite and first of its kind in India. The StudStat was successfully launched on 12 July 2010 from Satish Dhawan Space Centre into a sun synchronous orbit. This is the smallest satellite ever launched by any Indian organisation indigenously. The mission is experimental in nature and the major objective is for the students to have a hands on experience on the design, fabrication and realisation of a space mission at a minimum cost. The mission life is slated to be six months.

 

[Water Car Engineer]

GSLV Mk III

GSLV-MK-III payload fairing completes acoustic tests at NAL
copyright:By Anantha Krishnan M

The second liquid Stage of the GSLV-Mk III called the L110. A ISRO file photo.

Static testing of L110 liquid core stage of the GSLV- Mk III launch vehicle being conducted at ISRO's Liquid Propulsion Systems Centre test facility in Mahendragiri, Tamil Nadu on Friday. Photo: By Special Arrangement

GSLV Mk III booster(S-200) testing

 

[Super Falcon]

i dont like anyone of them as predictable

 

[BoB's]

Force India cars

VJM 03

VJM 04

VJM 05 (2012 SEASON)

 

[cloud_9]

As one of the world`s leading engineering corporations, CG provides end-to-end solutions, helping its customers use electrical power effectively and increase industrial productivity with sustainability. CG was established in 1937 in India; and, since then the Company has been a pioneer and has retained its leadership position in the management and application of electrical energy.Our unique and diverse portfolio ranges from transformers, switchgear, circuit breakers, network protection & control gear, project engineering, HT and LT motors, drives, lighting, fans, pumps and consumer appliances and turnkey solutions in all these areas; thus enhancing the many aspects of industrial and personal life. This portfolio has been structured into 3 SBUs - Power Systems, Industrial Systems and Consumer Products. For details please refer to the panel on the right.

Since 2005, CG has embarked upon an ambitious globalization strategy, growing both organically and inorganically, drawing into its fold leading international companies such as Pauwels, Ganz, Microsol, Sonomatra, MSE and PTS. Consequent to this globalisation, CG now enjoys manufacturing bases in Belgium, Canada, Hungary, Indonesia, Ireland, France, UK and US, in addition to more than twenty manufacturing locations in India, employing more than 8000 employees worldwide with diverse nationalities and cultures. A worldwide marketing network of more than 150 representatives spans the globe, offering the entire range of CG’s products, solutions and services.

 

[BoB's]

Arvind Mills, the flagship company of the Lalbhai Group, is one of India's leading composite manufacturer of textiles. Its headquarters is in Ahmedabad, Gujarat, India. It manufactures a range of cotton shirting, denim, knits and bottomweights (Khakis) fabrics. It is India's largest denim manufacturer apart from being world’s fourth-largest producer and exporter of denim. Today it not only retails its own brands like Flying Machine, Newport and Excalibur but also licensed international brands like Arrow, Lee, Wrangler and Tommy Hilfiger, through its nationwide retail network

Brands (owned)

Brands (licensed)

Crompton Greaves was already mentioned.

 

[cloud_9]

International Tractors Limited, manufacturer of Sonalika Farm Equipment and Tractors under the brand name 'Sonalika' has taken the same spirit forward not only in India but to over 70 countries across the world and has become a name to reckon with.Incorporated in 1969 to accomplish newer heights of success, Sonalika Group has come a long way. Today the group is among the top three tractor manufacturers of India and provides a complete product line including tractors, multi-utility vehicles, engines, farm machinery attachments, diesel gensets, auto components and pick & carry cranes.

Crompton Greaves was already mentioned.

Searched the thread bro.....but couldn't find it? Maybe i'm not good at searching stuff

 

[BoB's]

Searched the thread bro.....but couldn't find it? Maybe i'm not good at searching stuff

Check out post no 81 for Crompton and 265 for Sonalika. Please edit those posts and post about Hindustan Machine Tools and Cello pens.

 

[cloud_9]

JCT Limited, one of the leading manufacturer of textiles and filament yarn, is the flagship company of Thapar Group. With operations in two distinct businesses – cotton, synthetic & blended textiles and nylon filament yarn – JCT Limited is a market driven company fueled by good work ethic, values and a high standard of performance. It is this culture that has helped establish the company’s reputation as one of the finest in the country.

JCT Limited was the first textile manufacturer in the country to introduce eco-friendly fabrics made of organic cotton and its textile division was the first in the industry to be accredited with an ISO 9001 certification in 1996. Over five decades, since it commenced production in 1946, the textile unit of JCT Limited has grown into one of the largest textile manufacturers in India.

The company’s other operations include Filament Yarn, JCT Limited was also the first to set up a Colour Picture Tube plant in India (manufactured by JCT Electronics Ltd. in technical collaboration with Hitachi Ltd, Japan). Its Filament Plant is one of the largest in India with a capacity of 14000 MT per annum.

 

[cloud_9]

Hindustan Machine Tools was incorporated in 1953 by the Government of India as a machine tool manufacturing company. Over the years diversified into watches, tractors, printing machinery, metal forming presses, die casting & plastic processing machinery, CNC systems & bearings. HMT is headquartered at Bengaluru ( Bangalore ). Successful technology absorption in all product groups through collaborations with world renowned manufacturers and further strengthened by continuous in-house R&D. Today, HMT comprises six subsidiaries under the ambit of a holding company, which also manages the tractors business directly.

 

[cloud_9]

Cello Writing Instruments. The makers of India's favourite Cello pens, are a part of Rs.800 crore (US$ 182mn.) Cello Group. Lauded as one of the world's best and India's largest pen manufacturer's and well known for its dynamism and spirit of innovation.Today Cello offers one of the largest range of pens offered by any manufacturer in the world, all conforming to the highest global standards. The result of a well-equipped assembly line with over 175 ultra-sophisticated injection moulding machines and a highly trained and dedicated work force of 5000. Cello's extensive global R & D, cutting-edge manufacturing technology, production, processes, globally sourced material and exhaustive quality standards are among the best in the world. It's what makes Cello Group strong business conglomerate. It's what make a Cello a Cello.

 

[cloud_9]

The Aditya Birla Group is an Indian multinational conglomerate corporation headquartered in Mumbai, India.A US $35 billion corporation, the Aditya Birla Group is in the League of Fortune 500.It operates in 33 countries with more than 133,000 employees worldwide.The group has diversified business interests and is dominant player in all the sectors in which it operates such as viscose staplefibre, metals, cement, viscose filament yarn, branded apparel, carbon black, chemicals, fertilisers, insulators, financial services, telecom, BPO and IT services.

Apparel

Construction Materials

 

[cloud_9]

Carbon Black (The largest manufacturer of Carbon Black worldwide)

Chemicals

Fertilisers

Telecommunication

Non Ferrous Metals

 

[cloud_9]

Services

Textiles