What's new

Made in India military weapons and support systems

Torpedo Launch & Recovery Vessel for DRDO
torpedo_launch_recovery_vessel.jpg


A prestigious project won by SHOFT against stiff competition from major shipyards of the private sector. Design evolved by SHOFT by integrating demands of users - accommodation for large number of scientists, structure for matching the strength requirements of dynamic forces during launching of torpedos and hydraulic cranes for recovery of fired torpedos.

Offshore Patrol Vessels for Indian Navy & Coast Guard
OPV.jpg



patrol_vassel.jpg


All vessels were built in SHOFT shipyard on sub-contract from Goa Shipyard Ltd that includes entire hull up to main deck, complete underwater fittings, installation of machinery and piping to significant extent. The projects were according to GSL design and all materials, machinery & fittings were supplied by GSL.


Ammunition Barges for Indian Navy
ammunition_barges.jpg


Six barges serving Naval Armament Department, Mumbai for transportation of ammunition from storage centres to warships. Designed by SHOFT to Navy specifications. A novel feature introduced by SHOFT was lightweight FRP hatch covers.


Auxiliary Vessels for Coast Guard
256 1.jpg


4 nos Auxiliary Vessels for Indian Coast Guard for supplying fuel and fresh water to Coast Guard vessels at various locations.


Feed Water Barge
feed_water_barge.jpg


An important yard craft to serve Navy’s Aircraft Carriers. Fitted with stainless steel tanks for carrying distilled water for boilers feeding the propulsion turbines.
 
84mm Light weight launcher triple mounting
84mm_Light_weight_launcher_triple_mounting.jpg

Armoured_engineer_recee_vehicle_a.jpg

C Band Dual Mode Phase Shifter
C_Band_Dual_Mode_Phase_Shifter.jpg

C_Band_Dual_Mode_Phase_Shifter_1.jpg


Dhanush integration on LSS
Dhanush_integration_on_LSS.jpg

Greetings AERV2
GreetingsAERV2.jpg

Helmet Mounted Thermal Imagine Camera
Helmet_Mounted_Thermal_Imaging_Camera.jpg

Infantry combat vehicle Abhay
Infantry_combat_vehicle_Abhay.jpg


KADECU
KADECU.jpg


KAVERI MARINE
KAVERI_MARINE.jpg


NBC recee vehicle
NBC_recee_vehicle.jpg

NBC Shelter
NBC_Shelter.jpg


Nishant Launch
Nishant_Launch.jpg
NISHANT_Launcher.jpg
nishantUAV.jpg


PTA F
PTA_F.jpg

PTA_static.jpg



samyukta
samyukta.jpg


sandowtop
sandowtop_2.jpg
 
1M2Fxu4.jpg

DEFvMsv.jpg

KTilFXf.jpg


FIRST PICTURES OF BEL TRINETRA MRWS (MULTI PURPOSE REFLEX WEAPON SIGHT)

Trinetra is Indian designed reflex sight which is a parallax free , compact , light weight and rugged weapons sight for instant target acquisition.
A highly precise reticule , superimposed on the target scene , acts as an aim point for accurate firing. Fired has got the advantage of keeping both eyes open , during firing with Trinetra
To further enhance the capabilities of soldier and wept during CQB or Night, Trinetra is equipped with in built visible (red) and invisible (IR) laser spot designator which makes Trinetra an all in one versatile sight for all possible combat scenarios.

• Fast target acquisition
• Accurate aiming with precise reticule
• Large window for easy ops
• Visible laser spot designator
• Invisible laser spot designator
• LDR for auto intensity control
• Zeroing mechanism
• Brightness adjustment
• Low light / Night modes
• Facilitates both eyes shooting.
 
Ministry of Steel
13-October, 2017 15:32 IST
MOIL need to contribute Manganese for use in batteries of electric vehicles. and Tungsten for Defence Manufacturing, says Steel Minister Shri Birender Singh

MOIL must make significant contribution to Make in India by developing technology to meet Manganese requirement of batteries to be used in Electric Vehicles etc., said Steel Minister Shri Birender Singh while chairing mid-year review meeting of MOIL, a PSU under Ministry of Steel. The Minister asked the PSU to plan for building capacities in tungsten mining and production for strengthening manufacturing capabilities for defense production in India. The meeting was attended by Secretary, Steel Dr. Aruna Sharma, senior officials from Ministry of Steel and top management of MOIL.

Shri Singh further said, “MOIL should strategically plan for forward integration to leverage its leadership position of Manganese Ore production in India. The company can think of acquiring or taking majority stake in ferro-alloy production facilities, in addition to expansion efforts. There is huge potential for e-rickshaws, e-tempos and e-cars in India, which MOIL must be prepared for harnessing. In fact, the company should innovate to find new uses of Manganese Ore, apart from steel making, dry cell batteries and paints. R&D efforts should aim for development of new technologies rather than updating or buying technologies from others. The company need to work on utilizing every grade of ore gainfully including the lowest quality ore. Steel Ministry will support every R&D initiative aimed at self-sufficiency and indigenisation. Mineral exploration activities need to be speeded up for strengthening the resource base in India.Shri Birender Singh added that MOIL can also examine the feasibility of using alternate modes of ore transportation, which could be environment friendly and cost effective. For closure of mines, sand requirement can be met by innovative means like collaboration with local farmers. MOIL should aim to become the industry leader in innovation and technology development to such a level that other companies from abroad look upto MOIL for technology support.

In view of increase in requirement for manganese for steel production capacities upto 300 million tonnes and insufficient availability of the ore in India, MOIL must also explore the possibility of acquiring or taking stake in manganese ore assets abroad the Minister said.

YSK/MI
(Release ID :171683)

The Union Minister for Science & Technology, Earth Sciences and Environment, Forest & Climate Change, Dr. Harsh Vardhan inaugurating the Mega Science, Technology and Industry Expo, as part of the India International Science Festival 2017, at Anna University, in Chennai on October 13, 2017.
s20171013115192.jpg


The Union Minister for Science & Technology, Earth Sciences and Environment, Forest & Climate Change, Dr. Harsh Vardhan visiting the DRDL stall, at the Mega Science, Technology and Industry Expo, as part of the India International Science Festival 2017, at Anna University, in Chennai on October 13, 2017. The Minister of Higher Education, Afghanistan, Mr. Abdul Latif Roshan is also seen.
s20171013115193.jpg
 
Press Trust of India, Chennai, Oct 13 2017, 20:51 IST
618xNx637656_thump.jpg.pagespeed.ic.1eO8Vscv94.jpg

The research centre is aimed to boost the Indian scientific community, and is the largest in the world. PTI file photo.

http://www.deccanherald.com/content/637656/worlds-largest-combustion-research-centre.html


The world's largest combustion research centre which will impart a major boost to the Indian scientific community was inaugurated at the Indian Institute of Technology, Madras today.

The National Centre for Combustion Research and Development (NCCRD) was inaugurated by NITI Aayog member VK Saraswat in the presence of Prof Ashutosh Sharma, Secretary, Department of Science and Technology, a release by the Indian Institute of Technology, Madras (IIT-M) said.

This is the world's largest combustion research centre, it said. "With over 30 faculty members from six departments of IIT-M working on the project, this is the largest grouping of academic combustion researchers globally. In addition, the infrastructure facilities are also the largest for any combustion research centre in an academic setting globally," it said.

NCCRD's research interests will cover automotive, thermal power and aerospace propulsion, besides fire research and microgravity combustion to minor extent, the release said.

"The NCCRD has been established at a total cost of Rs 90 crore. It will develop state-of-the-art capabilities in combustion research involving experts in the country," it said.

"The establishment of the centre will impart a major boost to the Indian scientific community and will provide an impetus to research in 'Alternative Energy and Environmental Protection' by focusing on effective utilisation of combustion as a means of thermo-chemical energy conversion," the release said. NCCRD is supported by the state-run Science and Engineering Research Board of Department of Science and Technology (DST), it said. Saraswat was quoted as saying that NCCRD was one of the premier centres in the country.

"The intention is to make it a knowledge base in areas like gasification, combustion, propulsion and automotive sectors. This is one of the best diagnostic centres in the country to understand combustion," he said. NCCRD has been set up as a nodal centre in the region and any institute and industry can work with it as it is totally IT-enabled and possess a strong simulation facility, the NITI Ayog member said.

IIT-M director Bhaskar Ramamurthi said energy, emission of carbon dioxide and pollutant gases have become very important due to climate change, global warming and other impact that combustion has. "This centre will play a pivotal role in making sure that India has access to the latest technologies in all these areas," he said. Many industrial and R&D organisations like Mahindra, TVS, AVL, GAIL, GE, Shell, BHEL, DRDO (DRDL, GTRE, CFEES), NAL, ISRO, Forbes-Marshall, Siemens, Thermax, Cummins, FM Global, Tata Power, VTT and Valmet are working closely with NCCRD, the release added.
 
Ministry of Defence
15-October, 2017 10:19 IST
Minister of State of Defence Visited Ordnance Factory, Vehicle Factory and Gun Carriage Factory at Jabalpur

The Minister of State of Defence, Dr. Subhash Bhamre, visited Ordnance Factory Khamaria, yesterday. After the Guard of Honor by security squad, he reviewed the exhibition of products made in the factory. He was accompanied by Member of Parliament from Jabalpur Shri Rakesh Singh and MLA of Jabalpur Cantt area Shri Ashok Rohani. With keen interest he saw the 125mm FSAPDS anti-tank ammunition mango project. Later Minister inaugurated the state-of-the-art new production line for manufacturing of new variants of 84 mm ammunition.

The Minister appreciated the efforts made by the Ordnance Factory Khamaria for 106mm RCL and safe disposal of other rejected ammunitions. Also he appreciated and expressed his pleasure regarding the facilities prepared for the production of new ammunitions. He praised the efforts made by the factory, which he also recorded in his statement in the visitor's book. Senior General Manager also presented a memento of the factory to the Minister, MP and MLA. In the end, Dr. Bhamre paid tribute to the martyrs during the production in the martyr's memorial, planted Ashoka's plants in the martyr's memorial. Here he met the factory's union and association representatives.

Minister of State for Defence visited Vehicle Factory Jabalpur. In Vehicle Factory he visited assembly line of Mine Protected Vehicle and appreciated the work and motivated production line workers to put in their best. At the end Dr. Bhamre visited Gun Carriage factory wherein he tried his hands on Pride of Gun Carriage Factory-‘Dhanush’ 155 mm Gun

Later Dr. Subhash Bhamre addressed the large gathering of journalists and answered their queries during the press conference.

********
The Minister of State for Defence, Dr. Subhash Ramrao Bhamre inaugurating the state-of-the-art new production line for manufacturing of 84 mm ammunitions, during his visit to Ordnance Factory Khamaria, in Madhya Pradesh on October 14, 2017. The Member of Parliament of Jabalpur, Shri Rakesh Singh and MLA of Jabalpur Cantt. Area, Shri Ashok Rohani are also seen.
s20171015115318.jpg

The Minister of State for Defence, Dr. Subhash Ramrao Bhamre inspecting the Guard of Honour by the security squad, during his visit to Ordnance Factory Khamaria, in Madhya Pradesh on October 14, 2017.
s20171015115319.jpg


The Minister of State for Defence, Dr. Subhash Ramrao Bhamre inspecting the 125mm FSAPDS anti-tank ammunition mango project, during his visit to Ordnance Factory Khamaria, in Madhya Pradesh on October 14, 2017.
s20171015115320.jpg

Ministry of Defence
15-October, 2017 09:30 IST
Raksha Mantri Made her Maiden Visit to CVRDE, Chennai

The Raksha Mantri Smt. Nirmala Sitharaman made her maiden visit to Combat Vehicles Research & Development Establishment (CVRDE), Avadi, Chennai, yesterday. Chairman DRDO & Secretary Department of Defence R&D Dr S. Christopher and Distinguished Scientist & Director, CVRDE Dr. P Sivakumar, made a brief presentation on the achievements and on-going national programs of CVRDE in Combat Vehicles & Technologies.

The dignitaries were taken to various technology centres by Director, CVRDE to witness the products and systems/technologies developed by CVRDE. The Raksha Mantri has evinced keen interest in the advanced systems like Arjun MBT Mk-II, Arjun Armoured Recovery and Repair Vehicle (ARRV), Arjun Catapult, Unmanned Ground Vehicles, Sub-systems of Light Combat Aircraft –Tejas, Landing Gear, 180 hp engine for Rustom-II, 1000 hp Engine for T-72, 400 hp for BMP-II, besides Armoured Ambulance Tracked, Carrier Command Post Tracked, Bridge Laying Tank (BLT-72). The respective project leaders highlighted the uniqueness and specialities of their systems to the dignitaries.

The dignitaries assembled at CVRDE-Arjun Auditorium after the showcase of Tanks/ technologies. During this occasion, Raksha Mantri released a book namely ‘Arjun MBT – an Indian Success Story’ that describes the entire project of Arjun MBT Mk-I. In the august presence of the Raksha Mantri , Smt Nirmala Sitharaman and the Chairman, DRDO, the first prototype of Arjun ARRV was handed over by Chairman & Managing Director, BEML, Mr. Deepak Kumar Hota to Director, CVRDE; Director, CVRDE handed over one set of Landing Gear along with CEMILAC certification to Director, ADE; One set of Power Take Off Shaft to Director, GTRE; and Director, VRDE handed over 180 hp engine to Director, ADE.

Smt Nirmala Sitharaman launched the website, ‘DRDO Robotics & Unmanned Systems Exposition’ (https://rac.gov.in/druse) for inviting the young & talented minds of engineering community from all parts of the country to take part in Defence Challenging applications. She has also released a book titled ‘Achievements of CVRDE’ during the ceremony.

The Raksha Mantri congratulated DRDO fraternity, in particular CVRDE, for its unstinted efforts and contributions for the defence self-reliance of the nation and expressed her confidence that DRDO will strive hard to empower the nation further with ‘Make in India’ concept.

MJPS/TS/NR/GN/RP

The Union Minister for Defence, Smt. Nirmala Sitharaman interacting with the scientists, at Combat Vehicles Research & Development Establishment (CVRDE), Avadi, in Chennai on October 14, 2017. The Chairman DRDO & Secretary Department of Defence R&D, Dr S. Christopher, and the Distinguished Scientist & Director, CVRDE, Dr. P. Sivakumar are also seen.
s20171015115306.jpg


The Union Minister for Defence, Smt. Nirmala Sitharaman visiting the Combat Vehicles Research & Development Establishment (CVRDE), Avadi, in Chennai on October 14, 2017.
s20171015115307.jpg


The Union Minister for Defence, Smt. Nirmala Sitharaman visiting the Combat Vehicles Research & Development Establishment (CVRDE), Avadi, in Chennai on October 14, 2017.
s20171015115308.jpg


The Union Minister for Defence, Smt. Nirmala Sitharaman visiting the Combat Vehicles Research & Development Establishment (CVRDE), Avadi, in Chennai on October 14, 2017.
s20171015115309.jpg

The Union Minister for Defence, Smt. Nirmala Sitharaman visiting the Combat Vehicles Research & Development Establishment (CVRDE), Avadi, in Chennai on October 14, 2017.
s20171015115310.jpg


The Union Minister for Defence, Smt. Nirmala Sitharaman visits the Combat Vehicles Research & Development Establishment (CVRDE), Avadi, in Chennai on October 14, 2017.
s20171015115311.jpg


The Union Minister for Defence, Smt. Nirmala Sitharaman visits the Combat Vehicles Research & Development Establishment (CVRDE), Avadi, in Chennai on October 14, 2017.
s20171015115312.jpg


The Union Minister for Defence, Smt. Nirmala Sitharaman visits the Combat Vehicles Research & Development Establishment (CVRDE), Avadi, in Chennai on October 14, 2017.
s20171015115313.jpg

The Union Minister for Defence, Smt. Nirmala Sitharaman releasing a book titled ‘Achievement of CVRDE’, during her visit to the Combat Vehicles Research & Development Establishment (CVRDE), Avadi, in Chennai on October 14, 2017. The Chairman DRDO and Secretary, DD (R&D), Dr. S. Christopher and other dignitaries are also seen.
s20171015115314.jpg

The Union Minister for Defence, Smt. Nirmala Sitharaman releasing a book titled ‘Achievement of CVRDE’, during her visit to the Combat Vehicles Research & Development Establishment (CVRDE), Avadi, in Chennai on October 14, 2017. The Chairman DRDO and Secretary, DD (R&D), Dr. S. Christopher and other dignitaries are also seen.
s20171015115315.jpg

The Union Minister for Defence, Smt. Nirmala Sitharaman launched a website, ‘DRDO Robotics & Unmanned Systems Exposition’ (https://rac.gov.in/druse) for inviting the young & talented minds of engineering community from all parts of the country to take part in Defence Challenging applications during her visit to the Combat Vehicles Research & Development Establishment (CVRDE), Avadi, in Chennai on October 14, 2017. The Chairman DRDO and Secretary, DD (R&D), Dr. S. Christopher and other dignitaries are also seen.
s20171015115316.jpg

The Union Minister for Defence, Smt. Nirmala Sitharaman addressing the gathering at the Combat Vehicles Research & Development Establishment (CVRDE), Avadi, in Chennai on October 14, 2017.
s20171015115317.jpg
 
//economictimes.indiatimes.com/articleshow/61114993.cms?utm_source=contentofinterest&utm_medium=text&utm_campaign=cppst

NEW DELHI: The Indian Navy and the Indian Coast Guard will soon have their respective vessels installed with small and medium-sized diesel engines manufactured by Cooper Corporation,one of the leading manufacturers of engines in India.

A strategic Memorandum of Understanding (MoU) in this regard was inked between Cooper Corporation and Garden Reach Shipbuilders & Engineers Ltd. (GRSE), a Government of India undertaking.

The MoU was signed by Sarvjit Singh Dogra, Director (Finance) on behalf of GRSE and Farrokh N. Cooper, Chairman and Managing Director, Cooper Corporation.

This collaboration aims at setting up a fully indigenous product line of marine diesel engines specifically designed and developed for Indian Navy and Indian Coast Guard, a home-grown alternative to multinational brands currently available in the market.

Cooper Corporation will helm the design and manufacture of these diesel engines for marine DG set application, ranging from 50 KW - 500 KW.

GRSE will integrate these DG set at their Diesel Engine Plant (DEP) at Ranchi and subsequently sell it to their prospective customers- Indian Navy, Indian Coast Guard, Shipbuilders in India and abroad.

Farrokh Cooper said, "It's a very proud moment for us to be associated with Government of India - Ministry of Defence and a big achievement for a company which has graduated from cast iron engine components to contemporary engines. We are glad to partnerwith GRSE and will provide our best-in-class marine diesel engines armed with superior design and manufacturing quality to offer efficient and path-breaking power supply solutions for the Indian Navy and Indian Coast Guard.This effort is in line with promoting Government's Make-in-India initiative."

Sarvjit Singh Dogra said, "We are happy topartner with Cooper Corporation for the development of high quality, clean and fuel-efficientenginesto meet the requirements of Indian Navy and Indian Coast Guard.This MoU will facilitate mutual sharing of best practices and expertise, making it a fine example of engineering, technology and product innovation collaboration between GRSE and Cooper Corporation."

Cooper Corporation operates out of 11 plants in Satara, Maharashtra, with the help of experienced consultants from all over the world. Its products have a global appeal and acceptance, including in places like Central America, Africa, South Africa, Saudi Arabia, Bangladesh, Sri Lanka, Russia, Ukraine, UAE, Vietnam and Afghanistan.

Cooper today supplies auto parts and engine components to all leading OEMs in India and across the world from Japan to Europe and the USA.


*************
2c_1.jpg


2c_2.jpg

2c_3.jpg



  • Light weight and compact (40% Lighter & 25% Smaller)
  • Environment friendly complying with CPCB and EURO IV Norms
  • Low running cost
  • Clean & Green
  • Highest maintenance interval of 500 hrs.
  • Direct Injection (DI)
  • 4 Valves per cylinder
  • Oil Cooler and charge Air Cooling System
  • Engine performance is optimized for constant speed, Variable load & operating conditions
  • Fuel economy & emission has been optimized at source by means of
  • Low engine friction, Faster engine warm-up, Optimized combustion
  • HLA & RFF used for maintenance free quiet operation & reduced friction
  • Poly V- belt drive with automatic belt tensioner is used for quiet engine operation.
  • Cylinder liner central line is offset from Crank Bore central line to reduce the frictional losses arising due to piston slap.
  • Cylinder Head is Designed for high cylinder peak pressure up to 200 Bar to give good power to weight ratio.
  • Cylinder head gasket is a multilayer steel gasket to withstand high peak pressure and increased life.
  • Pistons with oil gallery and Piston cooling jets for effective cooling of piston crown
  • Fractured splitting process ensures assembly of large end cap on to the con rod, with "unique" and maximum surface contact, ensuring alignment and firm clamping.



***************
3c_1.jpg


3c_2.jpg


3c_3.jpg




  • Light weight and compact (40% Lighter & 25% Smaller)
  • Environment friendly complying with CPCB and EURO IV Norms
  • Low running cost
  • Clean & Green
  • Highest maintenance interval of 500 hrs.
  • Direct Injection (DI)
  • 4 Valves per cylinder
  • Oil Cooler and charge Air Cooling System
  • Engine performance is optimized for constant speed, Variable load & operating conditions
  • Fuel economy & emission has been optimized at source by means of
  • Low engine friction, Faster engine warm-up, Optimized combustion
  • HLA & RFF used for maintenance free quiet operation & reduced friction
  • Poly V- belt drive with automatic belt tensioner is used for quiet engine operation.
  • Cylinder liner central line is offset from Crank Bore central line to reduce the frictional losses arising due to piston slap.
  • Cylinder Head is Designed for high cylinder peak pressure up to 200 Bar to give good power to weight ratio.
  • Cylinder head gasket is a multilayer steel gasket to withstand high peak pressure and increased life.
  • Pistons with oil gallery and Piston cooling jets for effective cooling of piston crown
  • Fractured splitting process ensures assembly of large end cap on to the con rod, with "unique" and maximum surface contact, ensuring alignment and firm clamping.
*************

4c_1.jpg


4c_2.jpg


4c_3.jpg


  • Light weight and compact (40% Lighter & 25% Smaller)
  • Environment friendly complying with CPCB and EURO IV Norms
  • Low running cost
  • Clean & Green
  • Highest maintenance interval of 500 hrs.
  • Direct Injection (DI)
  • 4 Valves per cylinder
  • Oil Cooler and charge Air Cooling System
  • Engine performance is optimized for constant speed, Variable load & operating conditions
  • Fuel economy & emission has been optimized at source by means of
  • Low engine friction, Faster engine warm-up, Optimized combustion
  • HLA & RFF used for maintenance free quiet operation & reduced friction
  • Poly V- belt drive with automatic belt tensioner is used for quiet engine operation.
  • Cylinder liner central line is offset from Crank Bore central line to reduce the frictional losses arising due to piston slap.
  • Cylinder Head is Designed for high cylinder peak pressure up to 200 Bar to give good power to weight ratio.
  • Cylinder head gasket is a multilayer steel gasket to withstand high peak pressure and increased life.
  • Pistons with oil gallery and Piston cooling jets for effective cooling of piston crown
  • Fractured splitting process ensures assembly of large end cap on to the con rod, with "unique" and maximum surface contact, ensuring alignment and firm clamping.

    *************
    6c_1.jpg


    6c_2.jpg

    6c_3.jpg

    • Light weight and compact (40% Lighter & 25% Smaller)
    • Environment friendly complying with CPCB and EURO IV Norms
    • Low running cost
    • Clean & Green
    • Highest maintenance interval of 500 hrs.
    • Direct Injection (DI)
    • 4 Valves per cylinder
    • Oil Cooler and charge Air Cooling System
    • Engine performance is optimized for constant speed, Variable load & operating conditions
    • Fuel economy & emission has been optimized at source by means of
    • Low engine friction, Faster engine warm-up, Optimized combustion
    • HLA & RFF used for maintenance free quiet operation & reduced friction
    • Poly V- belt drive with automatic belt tensioner is used for quiet engine operation.
    • Cylinder liner central line is offset from Crank Bore central line to reduce the frictional losses arising due to piston slap.
    • Cylinder Head is Designed for high cylinder peak pressure up to 200 Bar to give good power to weight ratio.
    • Cylinder head gasket is a multilayer steel gasket to withstand high peak pressure and increased life.
    • Pistons with oil gallery and Piston cooling jets for effective cooling of piston crown
    • Fractured splitting process ensures assembly of large end cap on to the con rod, with "unique" and maximum surface contact, ensuring alignment and firm clamping.



Infrastruture.jpg
 
Is it Carl Gustav clone or licensed product.


Why they are making it for NATO ? Not for India.
Tonbo Imaging and MKU Industries have been selling many of their products to various NATO and western armed forces. The recent procurement of Light weight helmets for IA from MKU was initiated only after IA conducted a joint exercise with a NATO/US unit and realized that the helmets they've been using were procured from an Indian firm.

Hopefully, at least now GoI and IA realize the potential of private Indian defense firms and start procuring indigenously developed products rather than craving for foreign maal in favor of the kickbacks and commissions they receive
 

Pakistan Defence Latest Posts

Back
Top Bottom