Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
3. The twin towers collapsed because of the impact and high temperature fire.
When the core gave way the entire building collapsed like a deck of cards. The weight of the crumbling upper floors were too much for the floor just below it thus the collapse was unstoppable.
You don't need to melt steel, you just need enough heat to reduce it's load bearing capacity, thus causing it to fail.There is plenty of examples for non-techs. just like 12 hours long London fire which endorse the basic fact that building fire can't reach to the levels that it melts the structure in mysterious way.
No why would it decelerate? As the weight of collapsing floors increases the building should collapse at even faster rate, thus acceleration of collapse was observed.So if we go by your theory and the building pancaked wouldn't the towers decelerate because of the floors present directly below the above falling debris?, yet the towers actually accelerated downwards achieving free fall when they collapsed as though there was not a single form of obstructions directly below it, how is it that possible?.
No why would it decelerate? As the weight of collapsing floors increases the building should collapse at even faster rate, thus acceleration of collapse was observed.
You don't need to melt steel, you just need enough heat to reduce it's load bearing capacity, thus causing it to fail.
This is the exact reason why the twin towers collapsed.
Here we go again the same merry old conspiracy theory, for the thousandth time!
Next up: The dollar is dead.
exactly, to learn physics, one need to start with passing school with science subjects.Learn physics
It is obvious that your upbringing is not civilized hence calling me idiot when my previous post was not insulting to you at all.Learn physics you idiot the below floors are still standing on the steel structure, no matter how much load capacity is increased as the above debris falls their would still be some form of resistance from the standing structure slowing down the speed of the fall hence making free fall impossible, do you even know what free falls means? free fall is any motion of a body where gravity is the only force acting upon it, and the towers fell in free fall.
The residential building in london has steel covered with concrete, as you know that concrete does not let heat pass easily so the chances of steel weakening is not high.Can you explain, why steel of London tower is not melting, even after 12 hours of even more intense fires?
How does those lunatics who were involved in terror attacks, learned all this?
When steel melts it bends!The residential building in london has steel covered with concrete, as you know that concrete does not let heat pass easily so the chances of steel weakening is not high.
Still today I say wow that on 911 twin tower fall in a controlled explosive manner
Can any scientist explain ?
The steel bends and the rivets and weldings fail thus breaking the steel bars at its weekest links. You can see the mangled broken steel beams in images after the crash. The collapse actually accelerated towards the end because the weight of all the rubble was too much for the lower floors to handle.When steel melts it bends!
doesn't fall freely, like earth has been removed underneath.
How many highrise have ever collapsed due to fire?
Planned explosions did not happen, as no traces of explosive substances was found in the rubble. This is a conspiracy theory to make people believe that 9/11 was an insider job.What explains the explosions in twin towers, at the time of collapse?
Planned explosions did not happen, as no traces of explosive substances was found in the rubble. This is a conspiracy theory to make people believe that 9/11 was an insider job.
After 12 hours, wrapped in furious flames of fire from the bottom up to the top floor, this building is still standing.
Just saying.
@MastanKhan
Your comments?
You think engineers are stupid to put explosive equipment in buildings?
Cold air is pushed into the building by air ducts, there's nothing there to explode like a bomb in compressor.
When you have no idea, how electrical systems are designed and tested in US, don't state nonsense.
Of course electrical systems can fail, due to human negligence and sabotage but than its failure of US standards and their implementation. Still it can't fail in 3 buildings simultaneously and suddenly.
There were no burning debris, explosion on claddings have no explanation.
Building 7 was far.
After 12 hours, wrapped in furious flames of fire from the bottom up to the top floor, this building is still standing.
Just saying.
@MastanKhan
Your comments?
I always said the same that no one qualify for discussions, based on random news reports suiting their personal bias.
You need to discuss logically, use scientific arguments.
There is plenty of examples for non-techs. just like 12 hours long London fire which endorse the basic fact that building fire can't reach to the levels that it melts the structure in mysterious way.
Jet fuel can simply create a big fireball with causing high temperatures momentarily but that heat can't travel to core of ALL structure, in a matter of seconds.
Twin towers structural design is a whole lot different ball game.