What's new

Indigenous Vikram Microprocessor Fabricated For ISRO's Satellite Launch Vehicles Programme

Chanakya's_Chant

SENIOR MEMBER
Joined
Jul 22, 2013
Messages
3,395
Reaction score
28
Country
India
Location
India
Processor for Launch Vehicle Application realised at SCL Wafer Fabrication Facility

Semi-Conductor Laboratory (SCL) at Chandigarh, an Autonomous Body under the Department of Space, is engaged in Research & Development in the area of Microelectronics. Activities at SCL are focused on design, development, manufacturing, testing & assembly, packaging of Complementary Metal Oxide Semiconductor (CMOS) devices, Imaging and Micro-Electro-Mechanical Systems (MEMS) devices, including the development of process technology for various applications. SCL is also involved in High Reliability (Hi-Rel) board fabrication and component screening for ISRO, indigenisation of electronic boards for Air Force and production of Dr. Pisharoty Radio Sonde Systems for atmospheric studies.

SCL is continuing its efforts to create a strong microelectronics base in the country and enhance capabilities in Very Large Scale Integrated Circuits (VLSIs) domain. While the design, assembly, testing, quality / reliability assurance facilities are already in place, the manufacturing facility has been upgraded from 0.8 μm CMOS 6” Wafer Fabrication to 0.18 μm CMOS 8” Wafer Fabrication.

Production Lots (Wafer Lots) are being processed with Application Specific Integrated Circuits (ASICs) / Test Chips designed in-house. Second Lot, out of four Production Lots under processing, has been fabed-out in August 2015. Vikram Processor, one of the key components for Launch Vehicle application, has been successfully realised as part of this Lot. Main application of Vikram Processor is in the realisation of on-board computers for navigation, guidance and control processing in flight applications as well as for general purpose processing applications.

scl1.jpg

Vikram Processor devices being handed over by Secretary, DOS/Chairman, ISRO to Director, VSSC during September 2015

There is ever-increasing requirement of incorporating more features and reducing size, weight and volume of on-board systems coupled with improved reliability through higher level of integration. Technologies available at SCL in microelectronics domain are focused towards supporting ISRO/DOS and other sectors in realising these objectives indigenously and at the same time providing required flexibilities for their specific applications.

scl2.jpg

Wafer Fabrication Facility

scl3.jpg

Wafer Fabrication Facility –Inside Views

Source:- Processor for Launch Vehicle Application realised at SCL Wafer Fabrication Facility - ISRO
 
.
DRDO ANURAG's VLSI Designs & Microprocessors Used in Indian Missiles & Strategic Systems

India is considering a proposal to make it mandatory for the strategic sectors of Defence, Space and Atomic Energy to use 'made in India' chips in an initiative that will meet not only national security needs but also kick start the domestic semi-conductor manufacturing business that has been struggling to take off.

Source:- Make in India: Govt may make strategic sector source chips from local manufacturers - The Economic Times

VLSI Designs - Very-large-scale integration (VLSI) is the process of creating an integrated circuit (IC) by combining thousands of transistors into a single chip. VLSI began in the 1970's when complex semiconductor and communication technologies were being developed.

Microprocessors - A microprocessor is a computer processor that incorporates the functions of a computer's central processing unit (CPU) on a single integrated circuit (IC), or at most a few integrated circuits.


Advanced NUmerical Research and Analysis Group (ANURAG) is a laboratory of the Defence Research and Development Organisation (DRDO). Located in Kanchanbagh, Hyderabad, it is involved in the development of computing solutions for numerical analysis and their use in other DRDO projects.

Since the Missile Technology Control Regime (MTCR) prohibits the proliferation of the same - Here's a list of VLSI designs and microprocessors being used in Indian missiles and other strategic systems including RADAR's, SONAR's, IFF Systems & Torpedoes -

ANURAG-Developed+Products-1.jpg

ANURAG-Developed+Products-2.jpg
 
.
SCL is continuing its efforts to create a strong microelectronics base in the country and enhance capabilities in Very Large Scale Integrated Circuits (VLSIs) domain. While the design, assembly, testing, quality / reliability assurance facilities are already in place, the manufacturing facility has been upgraded from 0.8 μm CMOS 6” Wafer Fabrication to 0.18 μm CMOS 8” Wafer Fabrication.

Great :tup:
 
.
Earlier in 2008 Intel India's R&D unit developed the world's first six-core microprocessor - Xeon 7400 series processor based on Intel's x86 architecture - It was hailed as the the first Made in India commercial microprocessor - It was for the first time that work on the 45 nanometre technology was taken up by Intel outside its US home base.

Intel_Xeon_Logo.jpg


7f3128275d78493d3c1af68154366206.jpg


Intel_Dunnington_540x404.JPG

rediff.com: India's pride: The world's first six-core microchip!
 
.
Good news !

Presently 14 nm technology is being adopted in the west, India needs to catch up a lot in this field.

When we are in the first year of M.Tech VLSI , we used to think about fab city in Hyderabad and how it would change the semi conductor industry.

It took 8 years to establish a fab in India !!

Still a long way to go.
 
.
Why are they bothering with so many different lines and not focused on faster time to production? They are doing some useful work and have seen some startling technological advances hidden in research papers but it is so excruciatingly slow! May the govt should sell it to a consortium made of Tata, Reliance and Infosys or HCL
 
.
Good news !

Presently 14 nm technology is being adopted in the west, India needs to catch up a lot in this field.

When we are in the first year of M.Tech VLSI , we used to think about fab city in Hyderabad and how it would change the semi conductor industry.

It took 8 years to establish a fab in India !!

Still a long way to go.

14nm are there for full commercial operations. It is very very expensive at the moment, so investing in such a facility for limited use is not the best economic decision.
 
.
Why are they bothering with so many different lines and not focused on faster time to production? They are doing some useful work and have seen some startling technological advances hidden in research papers but it is so excruciatingly slow! May the govt should sell it to a consortium made of Tata, Reliance and Infosys or HCL

A semiconductor fab plant requires the following -

>>Investment.
>>Resources (Water, Electricity, Land)
>>Technology.
>>Skilled Work force. (Technicians, experts, etc)

(01) Investment - Fab needs min $5B investment, which is a significant amount. The private investors would expect Govt of India to contribute some share for this investment on Public-Private partnership model. Across globe, governments like Taiwan, China have partially fund the Fabs.

(02) Resources - This is the biggest issue with India, because of which foreign investors are afraid of investing huge capital cost in India. Surplus Pure Water and Uninterrupted Power supply are required. No need to tell about issues with Land acquisition in India.

(03) Technology and (04) Skilled work force - This is not big issue. We can achieve it.

Expecting large scale Fab plants at this stage is too early considering the entire Electronics ecosystem in India

Instead of committing for Multi Billion Fab plant, we need to ramp up the PCB manufacturing facilities gradually and then plan for Fab plant over a period of 10-15 years.

Now, We could import Chips from Taiwan,China and start manufacturing PCBs and assembling. Then, over the period, we could get the trained workforce on all aspects of electronics manufacturing/assembly and build the complete eco-system and achieve the investors confidence.

A good watch on the same -

As of now there are NO large commercial scale semiconductor wafer / integrated circuits fabrication plants in India - the first one is expected to open up by late 2017 - But there are more than 120 companies in India focused on semiconductor design for global products - nearly 2,000 chips are being designed every year in India and more than 20,000 engineers are working on various aspects of chip design and verification. In 2014-15, electronics system design and manufacturing (ESDM) market in India was estimated to be around $90 billion of which around 65-70 per cent of the demand was met through imports.
 
.
Does India really need a $5bn semiconductor unit?
By Vinod Dham

There has been for a long time, an on-again and off-again debate about whether India needs a fab. A fab is a plant formanufacturing semiconductor chips, also popularly called silicon chips or simply chips. Silicon chips are ubiquitous today. They are in side all types of gadgets that we use in our daily lives: TVs, computers, cell phones, radios, cars, etc.

So clearly there is a big market for making these chips and, therefore, a case can be made that India should build its own fab to meet India's domestic needs. Chip building business is highly competitive and cyclical. It has been around for over 50 years and there are very well established and well entrenched players. The most recent chip fab, China's state funded SMIC (Semiconductor Manufacturing International Corporation founded in 2000), has failed to make a dent in the chip making industry despite 15 years of state-sponsored effort.

Building a fab is a very expensive undertaking. While Moore's law (named after Gordon Moore, Intel's co-founder and observer of this trend) has commoditized semiconductor chips resulting in a staggering reduction of roughly a factor of a billion in price over the last 50 years, the cost of manufacturing equipment for these chips has also increased exponentially over this period. To build a fab using current state-of-the-art technology costs about $5bn (Rs 30,000 crore) initially.

In addition, the fab will required to be retooled every two to three years, at an additional enormous cost, to stay competitive. The cost of building and retooling a chip plant has become so prohibitive that in USA only one company, Intel, has the wherewithal to build its own chip plant. In fact, the astronomical cost of building a fab has forced chip companies to pool together their financial resources to set up plants like "Global Foundries" for manufacturing their chips.

Even if we were to build a fab in India despite such prohibitive reoccurring financial undertaking, one of the biggest challenges will be what chips to make in them and how to keep the fab fully loaded. Let us say we decide to build chips for cell phones. The top three popular selling cell phone brands in India are Samsung, Micromax and Nokia. Since a new Indian fab will offer no competitive advantage in terms of price or performance, it will be hard to convince Samsung, Micromax or Nokia to build their chips in this fab.

This same logic prevails for building chips for the TV, personal computers, automotive and other such markets. And even if all three cell phone suppliers were to agree to build their chips in India, the volume of these chips may not be enough to keep the fab fully utilized. Running a partially filled fab is like flying a partially filled Dreamliner — a losing value proposition.

One way to, however, get around the issue of how to keep the fab fully utilized is to invite someone like Samsung or Intel set up a plant in India to meet their own global market needs, including those for their sales in India. Clearly, the Indian government will still need to guarantee uninterrupted electric supply and millions of gallons of water to run these plants besides importing very expensive highly skilled semiconductor specialists to manage the fab's highly automated and expensive equipment.

Thus, given enough subsidies and incentives, if a foreign MNC could still justify building their chips in India, it will be a good way for India to get into the business of building chips. Over a very long period of time, such a move could end up creating a critical mass of an ecosystem required to sustain such a business in the long run.

Recently, the Indian government has expressed concerns about security risks posed by the use of some foreign-made chips. India is reportedly considering a proposal to make it mandatory for the core strategic sectors of defence, space, atomic energy and cyber security to use 'made in India' chips to protect its national security needs while kick-starting the domestic semiconductor manufacturing business. Unfortunately, these sectors alone can't generate enough volume to justify a state-of-the-art fab, besides the concerns I have discussed earlier.

However, once the government has defined and designed such special chips, it may be better to build them in an older generation fab. The older fab could cost one fifth to one tenth of the state-of-the-art fab and be optimal for producing lower volume, larger variety, mixed signal chips with higher reliability resulting from use of more mature technology.

Cyber-security has become a major concern for countries and companies worldwide. Cyber-security is very essential for national security. The entire cyber-warfare infrastructure in the USA is reportedly based on information technology consisting of standard networks of low cost computing devices. The secret to addressing this concern in a practical manner for India is to strategically use software (India's strength) and firmware as its secret sauce. Moreover, India should implement a "Trusted Manufacturer's Program" for its core strategic needs. This program should be designed to certify chips, software and systems produced by foreign manufacturers and avoid buying from adversary countries.

The writer is an inventor, entrepreneur and venture capitalist

Source:- Does India really need a $5bn semiconductor unit? - The Times of India
 
.
As of now there are NO large commercial scale semiconductor wafer / integrated circuits fabrication plants in India - the first one is expected to open up by late 2017 - But there are more than 120 companies in India focused on semiconductor design for global products - nearly 2,000 chips are being designed every year in India and more than 20,000 engineers are working on various aspects of chip design and verification. In 2014-15, electronics system design and manufacturing (ESDM) market in India was estimated to be around $90 billion of which around 65-70 per cent of the demand was met through imports.

Do you have a source for the 2017 venture?

Thanks for the info! We must definitely address this domestic shortfall of ESDM, although it is heartening to see at least its not 100% imported.

The design, drive and talent is all there....we just need proper infrastructure, incentives and low cost financing for production side. Hopefully Modi govt will ensure this in coming years.
 
.
Earlier in 2008 Intel India's R&D unit developed the world's first six-core microprocessor - Xeon 7400 series processor based on Intel's x86 architecture - It was hailed as the the first Made in India commercial microprocessor - It was for the first time that work on the 45 nanometre technology was taken up by Intel outside its US home base.

Intel_Xeon_Logo.jpg


7f3128275d78493d3c1af68154366206.jpg


Intel_Dunnington_540x404.JPG

rediff.com: India's pride: The world's first six-core microchip!

there is nothing "made in india" about this chip or the other ones in the op.

the intel-bangalore team is lying when it said it made anything... was the design ( instruction set, i/o architecture etc ) new... was the design for a radically new way of computing... as your text says, the xeon 7400 is based on intel x86 isa.

the bangalore team just extended a four-core design to six-core design, what's the big deal about it... these people are just mediocre engineers and not any sort of designers... besides, intel has stopped selling that chip i believe... the bangalore team should be taken to court for lying.

as for the the sanskrit-named chips ( anu this, anu that ), you should enquire of their design... you may just find them to be western ( like most things in indian technology ).

there was certainly a "made in india" microprocessor program of the government - the india microprocessor program, started in 2009 and meant to provide alternates to intel x86 or arm or sun sparc, but has failed to come up with even a design ( Why a made-in-India chip remains chimeric - Livemint ).

most indians sadly let unnatural nationalism cloud natural common sense and make embarrassing statements about "indian achievements" which turn out to be anything but.

The design, drive and talent is all there

most talent in india is only in passing school/college exams and then being in a life of jobs... design and innovation need paths that are opposite to prescribed/expected indian way of life.

no invention from India in 60 years: n. r. narayana murthy
 
.
A semiconductor fab plant requires the following -

>>Investment.
>>Resources (Water, Electricity, Land)
>>Technology.
>>Skilled Work force. (Technicians, experts, etc)

(01) Investment - Fab needs min $5B investment, which is a significant amount. The private investors would expect Govt of India to contribute some share for this investment on Public-Private partnership model. Across globe, governments like Taiwan, China have partially fund the Fabs.

(02) Resources - This is the biggest issue with India, because of which foreign investors are afraid of investing huge capital cost in India. Surplus Pure Water and Uninterrupted Power supply are required. No need to tell about issues with Land acquisition in India.

(03) Technology and (04) Skilled work force - This is not big issue. We can achieve it.

Expecting large scale Fab plants at this stage is too early considering the entire Electronics ecosystem in India

Instead of committing for Multi Billion Fab plant, we need to ramp up the PCB manufacturing facilities gradually and then plan for Fab plant over a period of 10-15 years.

Now, We could import Chips from Taiwan,China and start manufacturing PCBs and assembling. Then, over the period, we could get the trained workforce on all aspects of electronics manufacturing/assembly and build the complete eco-system and achieve the investors confidence.

A good watch on the same -

As of now there are NO large commercial scale semiconductor wafer / integrated circuits fabrication plants in India - the first one is expected to open up by late 2017 - But there are more than 120 companies in India focused on semiconductor design for global products - nearly 2,000 chips are being designed every year in India and more than 20,000 engineers are working on various aspects of chip design and verification. In 2014-15, electronics system design and manufacturing (ESDM) market in India was estimated to be around $90 billion of which around 65-70 per cent of the demand was met through imports.

I am sure progressive states like Gujarat & AP cab grab these fans by offering sops for companies
 
. .
From 800nm to 180nm thats quite a big leap in technology advancement,nice article but it does not state whether we upgraded our fab by ourself of Israeli's helped us for upgradation.
Also it mentions vikram can be used in general processing applications,i bet if it is open architecture they will release processor architecture for study.And if they release then hope Indian universities put it in engineering curriculum.
Also do you know drdo also had there own fab lab,so they might get some upgrades to.
And do you know anything about fab facility at IISC They say its one of the best in country.
 
.

Country Latest Posts

Back
Top Bottom