IDEAS 2012 Pakistan International Defence (Nov 7-11)

[A.Rafay]

Could you plz show us detailed Photos of the Pakistani made anti air craft Gun ?




Have more informations and detailed Photos of this vehicles plz ? thx a lot

respect for your worke ! P.S Khalid and Ulla from other forums !

I have posted info about these vehicles in the thread made in Pakistan !

 

[Jango]

There were news about some Casspirs being in service/trial with PA, and another MRAP. What happened to them? Not bought?

 

[skybolt]

In this backdrop, IDEAS-2012 proved very fruitful for the national defence industry as a number of major joint initiatives took place during this prestigious exhibition, including China’s Poly Technologies will be providing mine resistant ambush vehicles to the Pakistan Army for the first time.

The type CS/VP3 vehicle is designed to provide secure transportation for combat personnel and materials, especially under the threat of anti-tank mines. Besides, it will also be beneficial for performing anti-terrorism and anti-riot missions. The combat product will also feature modern day telecommunication and navigation technologies, including GPS.

Interestingly, Poly Technologies has actively cooperated with Pakistan for the provision of advanced defence equipments and technologies.

 

[skybolt]

CS/VP3 MRAP Mine-Resistant Ambush Protected armoured personnel carrier Vehicle​

Description:
CS/VP3 is an APC armoured personnel carrier in the category of MRAP (Mine-Resistant Ambush Protected Vehicle) vehicle designed and manufactured by the Chinese Company Poly Technologies. The vehicle was unveiled at the DSA 2012, defence exhibition in Malaysia. With its new MRAP, Chinese defence industry responds to needs of modern armies as American and European defence industries since several years. MRAP vehicles were largely used during the war in Iraq and currently in Afghanistan. We can suppose that the Chinese MRAP vehicle CS/VP3 is cheaper than its American or European counterparts.

Variants:
The CS/VP3 may be suitable for use as ambulance, command post and reconnaissance vehicle.

Technical Data:

Armament
There are two small manual single turret mounted at the front and the rear of the top crew compartment which can rotated on 360 deg, each with one single hatch. The turrets can be armed 7.62mm or 12.7mm machine gun. The gunners are protected with armour plates on 360 deg.

Design and protection
The engine compartment of the CS/VP3 is at the front, driver and commander in the middle and infantry soldiers compartment at the rear. Several storage compartments are located in the vehicle's exterior body section to facilitate the storage and carrying of various types of logistical equipment and ammunition. One single door is provided for the driver and the commander and one to the rear of the hull allowing the troop's to leave and enter quickly in the vehicle. There are four bulletproof windows on each side of the hull with a firing port in the center. The front of the crew compartment is fitted with two large bulletproof windows; the right one is equipped with one firing port in the middle. The CS/VP3 is based on a V-shaped hull and all-welded steel armour that provides a ballistic protection against firing of small arms 7.62x51mm caliber and 7.62x51mm with add-on armour.
Land mine protection is provided against 8kg TNT all-around the hull and 16kg of TNT under each wheels. The CS/VP can accommodate a total of 12 soldiers, including driver and commander. The
troop's compartment has a total of 10 individual seats, 5 on each side of the vehicle, facing inwards

Propulsion
The CS/VP3 is motorized with a unspecified Diesel engine. The vehicle can run at a maximum road speed of 100km with a maximum cruising range of 800 km. The CS/VP3 is able to negotiate slopes up to 60%, side slopes to 30%, vertical obstacle of 0.6m and fording depth of 1.2m.

Accessories
Standard equipment of the CS/VP3 includes a 10t self-recovery winch mounted at the front of hull, fire extinguishers and two spare wheels, one to each rear side of the hull. In option, the vehicle can be equipped with radio and network communication systems, GPS and air conditioning.

 

[skybolt]

MRAP Mine-Resistant Ambush Protected armoured personnel carrier Vehicle technical data sheet

Specifications

Armament
Two 7.62mm or 12.7mm machine guns

Country users
Ready for production

Designer Country
China

Accessories
Self-recovery winch, fire extinguishers, radio and network communication systems, GPS and air conditioning.

Crew
2+10 Solders

Armor
Protection small arms firing 7.62m or 7.62mm AP with add-on armour. Max 16 kg land mines

Combat Weight
15,000 kg

Speed
100 km/h maximum road speed

Range
800 Km

Dimensions
Length, 7.58 m; Width, 2.45 m; Height, 3.25 m turret

 

[skybolt]

 

[krash]

Great News: Pakistan is Buying this Monster

Pakistan to Import Mine Resistant Ambush Vehicle from China
The agreement was signed by Lieutenant General Ayaz Saleem chairman HIT and Wang Li, vice President Novinco. According to sources, Pakistan for the first time was going to import Mine Resistant Ambush Vehicles. Poly Technologies of China a prominent company dealing with advanced equipment and technology will be providing the important vehicles (which were also displayed here in the exhibition) to Pakistan. The vehicle was designed to provide secured transportation for combat personnel and material especially under the threat of anti-tank mines. Besides it will also be beneficial for performing anti-terrorism and anti-riot mission.

Reminds one of the Marauder:

 

[Dr. Strangelove]

In this backdrop, IDEAS-2012 proved very fruitful for the national defence industry as a number of major joint initiatives took place during this prestigious exhibition, including China’s Poly Technologies will be providing mine resistant ambush vehicles to the Pakistan Army for the first time.

The type CS/VP3 vehicle is designed to provide secure transportation for combat personnel and materials, especially under the threat of anti-tank mines. Besides, it will also be beneficial for performing anti-terrorism and anti-riot missions. The combat product will also feature modern day telecommunication and navigation technologies, including GPS.

Interestingly, Poly Technologies has actively cooperated with Pakistan for the provision of advanced defence equipments and technologies.

is hit gonna produce this???

 

[Inception-06]

I have posted info about these vehicles in the thread made in Pakistan !

Could plz give the exact Link I did not finde anything !

 

[Thorough Pro]

GIDS is a trading company, not a manufacturing concern or maybe you can guide us where is there manufacturing facility located?

Manufactured By GIDS

 

[hassana]

Could you plz show us detailed Photos of the Pakistani made anti air craft Gun ?




Have more informations and detailed Photos of this vehicles plz ? thx a lot

respect for your worke ! P.S Khalid and Ulla from other forums !

This looks like anti air craft truck, now that,s good.

 

[skybolt]

GIDS is a trading company, not a manufacturing concern or maybe you can guide us where is there manufacturing facility located?

GIDS is relatively new Pakistani conglomerate established in 2007, involved in the exports and marketing of military, industrial and technological products and services. GIDS is representing a group of companies in national and Internationl markters who are involved in research, development, delivery and support of leading edge industrial and defence system in the field of air, land and sea.

The group consists of AERO (Advance Engineering Research Organization), IDS(Integrated Defence System), MSL (Maritime Systems Pvt. Limited), IICS (Institute of Industrial Control System), ATCOP (Al-technique Corporation), DESTO (Defence Science and Technology Organization), and some of their subsidiaries providing support and service solutions for current and future defence, security, and information technology systems; design, develop and manufacture a wide range of electronic systems and subsystems for both military and commercial applications. They also design, develop, produce, and provide service support of armoured combat vehicles, artillery systems and intelligent munitions.

Technology and innovation are the keystones of GIDS success and competitive edge. GIDS companies invest huge amount in R&D activities making GIDS the leading Pakistani investor in hi-tech sectors. To maintian its leadership in hi-tech sectors, GIDS focuses on the value of its human resources, and the laboratories of its companies are staffed by highly specialized researchers. Our organization is designed to deliver the cost, capability and overall financial performance to meet customers' needs.

GIDS Companies

1. AERO (Advance Engineering Research Organization)
2. IDS (Integrated Defence System)
3. MSL (Marine System Limited)
4. IICS (Institute of Industrial Control Systems)
5. ATCOP (Al-Technique Corporation of Pakistan)
6. DESTO (Defence Science and Technology Organization)

 

[monitor]

@skybolt where is Al khalid ?

 

[skybolt]

Facebook Event:
Mark Your Calendar

8th The International Defence Exhibition and Seminar (IDEAS) 2014
1-4 December 2014

http://www.facebook.com/events/462494770456083/


The International Defence Exhibition and Seminar (IDEAS), showcases a wide variety of technology, ranging from equipment used in the third world countries to the most sophisticated systems from the West. This exhibition provides a perfect interactive platform for the defence forces to assess the best products and technology to cater for their respective defence-related requirements...

Organized By: Defence Export Promotion Organization
A Venture of: Government of Pakistan
Supported By: Pakistan Armed Forces
Endorsed By: Trade Development Authority of Pakistan
Event Manager: Badar Expo Solutions

 

[skybolt]

@skybolt where is Al khalid ?

already Posted...
But again for you & More Al-Khalid is comming Soon ...