oct605032048
SENIOR MEMBER
- Joined
- Jul 8, 2009
- Messages
- 2,972
- Reaction score
- 0
听说德阳八万吨试车成功了 Great Cong!
China Economy Forum
- Thread starter EagleEyes
- Start date
sweetgrape
BANNED
- Joined
- Dec 5, 2011
- Messages
- 2,780
- Reaction score
- -3
- Country
- Location
China's first 40,000 tons of aviation forging hydraulic press in Xi'an Thermal test
China's first 40,000 tons of aviation forging hydraulic press in Xi'an Thermal test - Finance News
BEIJING, March 31 (Tian Jin) 31, Xi'an, China first 400MN (40,000 tons) of heavy aviation forging hydraulic press in Xi'an Yanliang National Aviation Hi-tech industrial base hot test is successful, successfully forging its first The large disc-type products.
, 400MN forging hydraulic machines by heavy duty aviation Xi'an Triangle Aviation Technology Co., Ltd. for the system design Tsinghua University, China two 12 rule of manufacturing, is the world's largest single-cylinder forging hydraulic press. The project to the production of large-scale precision aviation mode forgings as the main target, production will improve the development and production levels of aviation die forgings for aircraft and aircraft engine development technology of great significance to promote the rapid development of China's aviation industry(Agile News - Breaking News Updates | Latest News Headlines | Photos News).
The hydraulic machine with a world-class design and control system is an important foundation for China's large aircraft program and equipment of the hydraulic machine body structure with completely independent intellectual property rights, in the field of steel wire prestressed wound from Tsinghua University, with its decades of accumulation of based on the most advanced application of prestressed steel wire wrapped around the split - Hom together technology, robotics, intelligent winding technology designed to address the press carrying rack, the 400MN primary cylinder, moving beams and other key components of the design and manufacturing problems manufacturing process as a whole pan of the robot in situ wound construction and heavy structure, lifting and installation techniques, equipment overall performance has reached the world advanced level.
The completion and commissioning of the project can enhance the design and manufacture of aerospace equipment manufacturing industry in China, to solve the large titanium overall box beam and large-scale turbine disk, and other difficult deformation of the design and manufacture of precision forging, and the protection of large aircraft project Development at the same time, the device can be widely used in aerospace, shipbuilding, petrochemical, power, weapons, nuclear power.
It is reported that the project has been the intention of orders for many famous aviation enterprises, and by The Boeing Company (microblogging), Airbus, Pratt & Whitney, Liebherr, Goodrich, GE, Luo - Luo and other internationally renowned aviation manufacturing enterprises of great concern. (End)
China's first 40,000 tons of aviation forging hydraulic press in Xi'an Thermal test - Finance News
BEIJING, March 31 (Tian Jin) 31, Xi'an, China first 400MN (40,000 tons) of heavy aviation forging hydraulic press in Xi'an Yanliang National Aviation Hi-tech industrial base hot test is successful, successfully forging its first The large disc-type products.
, 400MN forging hydraulic machines by heavy duty aviation Xi'an Triangle Aviation Technology Co., Ltd. for the system design Tsinghua University, China two 12 rule of manufacturing, is the world's largest single-cylinder forging hydraulic press. The project to the production of large-scale precision aviation mode forgings as the main target, production will improve the development and production levels of aviation die forgings for aircraft and aircraft engine development technology of great significance to promote the rapid development of China's aviation industry(Agile News - Breaking News Updates | Latest News Headlines | Photos News).
The hydraulic machine with a world-class design and control system is an important foundation for China's large aircraft program and equipment of the hydraulic machine body structure with completely independent intellectual property rights, in the field of steel wire prestressed wound from Tsinghua University, with its decades of accumulation of based on the most advanced application of prestressed steel wire wrapped around the split - Hom together technology, robotics, intelligent winding technology designed to address the press carrying rack, the 400MN primary cylinder, moving beams and other key components of the design and manufacturing problems manufacturing process as a whole pan of the robot in situ wound construction and heavy structure, lifting and installation techniques, equipment overall performance has reached the world advanced level.
The completion and commissioning of the project can enhance the design and manufacture of aerospace equipment manufacturing industry in China, to solve the large titanium overall box beam and large-scale turbine disk, and other difficult deformation of the design and manufacture of precision forging, and the protection of large aircraft project Development at the same time, the device can be widely used in aerospace, shipbuilding, petrochemical, power, weapons, nuclear power.
It is reported that the project has been the intention of orders for many famous aviation enterprises, and by The Boeing Company (microblogging), Airbus, Pratt & Whitney, Liebherr, Goodrich, GE, Luo - Luo and other internationally renowned aviation manufacturing enterprises of great concern. (End)
800Mn tons ......is on the wayChina's first 40,000 tons of aviation forging hydraulic press in Xi'an Thermal test
China's first 40,000 tons of aviation forging hydraulic press in Xi'an Thermal test - Finance News
BEIJING, March 31 (Tian Jin) 31, Xi'an, China first 400MN (40,000 tons) of heavy aviation forging hydraulic press in Xi'an Yanliang National Aviation Hi-tech industrial base hot test is successful, successfully forging its first The large disc-type products.
, 400MN forging hydraulic machines by heavy duty aviation Xi'an Triangle Aviation Technology Co., Ltd. for the system design Tsinghua University, China two 12 rule of manufacturing, is the world's largest single-cylinder forging hydraulic press. The project to the production of large-scale precision aviation mode forgings as the main target, production will improve the development and production levels of aviation die forgings for aircraft and aircraft engine development technology of great significance to promote the rapid development of China's aviation industry(Agile News - Breaking News Updates | Latest News Headlines | Photos News).
The hydraulic machine with a world-class design and control system is an important foundation for China's large aircraft program and equipment of the hydraulic machine body structure with completely independent intellectual property rights, in the field of steel wire prestressed wound from Tsinghua University, with its decades of accumulation of based on the most advanced application of prestressed steel wire wrapped around the split - Hom together technology, robotics, intelligent winding technology designed to address the press carrying rack, the 400MN primary cylinder, moving beams and other key components of the design and manufacturing problems manufacturing process as a whole pan of the robot in situ wound construction and heavy structure, lifting and installation techniques, equipment overall performance has reached the world advanced level.
The completion and commissioning of the project can enhance the design and manufacture of aerospace equipment manufacturing industry in China, to solve the large titanium overall box beam and large-scale turbine disk, and other difficult deformation of the design and manufacture of precision forging, and the protection of large aircraft project Development at the same time, the device can be widely used in aerospace, shipbuilding, petrochemical, power, weapons, nuclear power.
It is reported that the project has been the intention of orders for many famous aviation enterprises, and by The Boeing Company (microblogging), Airbus, Pratt & Whitney, Liebherr, Goodrich, GE, Luo - Luo and other internationally renowned aviation manufacturing enterprises of great concern. (End)
Aramsogo
FULL MEMBER
- Joined
- Feb 1, 2011
- Messages
- 1,906
- Reaction score
- -2
Tue Apr 3, 2012 9:21am EDT
(Reuters) - German businessman Norbert Scheuch was bowled over by his red-carpet treatment on a visit to China late last year and by how fast the country's largest construction firm sealed the deal to buy his company.
The head of Sany Heavy Industry, which is controlled by China's richest man, Liang Wengen, personally gave Scheuch a tour of their plant and then had a top manager drive him to the airport and wait with him for his flight home.
"Nobody would ever do that in Europe," said Scheuch, CEO of concrete pump maker Putzmeister.
"The Chinese made it very clear from the beginning they wanted the company immediately," he added.
Barely a month later, Sany's top negotiator Xiang Wenbo was in the offices of law firm Shearman Sterling in Frankfurt at 3 am to sign the deal to buy Putzmeister for 360 million euros ($472 million) after a nine-hour session with the notary.
The purchase, which gives Sany a technological edge over its rivals, illustrates how Chinese investors are becoming more savvy about foreign takeovers, not just to gain access to raw materials or patents but as an engine for growth.
Insight: Bullish China shops in industrial Germany | Reuters
(Reuters) - German businessman Norbert Scheuch was bowled over by his red-carpet treatment on a visit to China late last year and by how fast the country's largest construction firm sealed the deal to buy his company.
The head of Sany Heavy Industry, which is controlled by China's richest man, Liang Wengen, personally gave Scheuch a tour of their plant and then had a top manager drive him to the airport and wait with him for his flight home.
"Nobody would ever do that in Europe," said Scheuch, CEO of concrete pump maker Putzmeister.
"The Chinese made it very clear from the beginning they wanted the company immediately," he added.
Barely a month later, Sany's top negotiator Xiang Wenbo was in the offices of law firm Shearman Sterling in Frankfurt at 3 am to sign the deal to buy Putzmeister for 360 million euros ($472 million) after a nine-hour session with the notary.
The purchase, which gives Sany a technological edge over its rivals, illustrates how Chinese investors are becoming more savvy about foreign takeovers, not just to gain access to raw materials or patents but as an engine for growth.
Insight: Bullish China shops in industrial Germany | Reuters
Stocks lower on worries about Chinese economic slowdown
U.S. stocks declined, snapping a three-day advance for the Standard & Poor’s 500 Index, as commodities fell on concern about a Chinese economic slowdown.
Freeport-McMoRan Copper & Gold Inc. and Cliffs Natural Resources Inc. dropped more than 2.7 percent as China raised fuel prices by the most in two years and BHP Billiton Ltd. said the nation’s steel production is slowing. Adobe Systems Inc. sank 3.6 percent as its profit forecast missed some estimates. Tiffany & Co. surged 5.3 percent after the second-largest luxury jewelry retailer forecast profit that beat projections.
The S&P 500 lost 0.8 percent to 1,398.29 at 9:44 a.m. New York time. The benchmark gauge for U.S. equities yesterday rose to the highest level since May 2008. The Dow Jones Industrial Average declined 109.32 points, or 0.8 percent, to 13,129.81.
“A Chinese slowdown is inevitable,” Peter Jankovskis, who helps manage about $2.9 billion at Oakbrook Investments in Lisle, Illinois, said in a telephone interview. “It’s possible that will take some of the heat out of commodities as they are the driver of demand. Yet China is not the only growth story out there. China will continue to be an important player, but the U.S. economy seems to have found its legs.”
Global stocks fell as China is raising fuel prices for the second time in less than six weeks. The nation’s vehicle sales may miss industry forecasts this year as economic growth slows, an official from the China Association of Automobile Manufacturers said. BHP Billiton Ltd., the world’s biggest mining company, said China’s steel production is slowing. In the U.S., data showed housing starts fell from a three-year high.
On Pace
The S&P 500 has rallied 11 percent this year and is on pace for the best first quarter since 1998 amid better-than-estimated economic and corporate reports. It trades at about 14.5 times reported earnings, the highest valuation level since July while still below the average since 1954 of 16.4 times earnings.
Energy and raw material shares slumped as the S&P GSCI commodity gauge dropped 1.4 percent. Freeport-McMoRan slid 2.7 percent to $38.10. Cliffs Natural Resources fell 4 percent to $70.23. Industrial shares also retreated. Joy Global Inc. lost 4.3 percent to $75.96. Caterpillar Inc. declined 2.3 percent to $111.16.
Adobe sank 3.6 percent to $33.28. Excluding some costs, profit will be 57 cents to 61 cents a share in the second quarter, Adobe said. The midpoint of that range -- 59 cents -- missed the 60 cents predicted by analysts, according to data compiled by Bloomberg. Sales will be $1.09 billion to $1.14 billion, compared with a $1.11 billion average estimate.
Box Office
Walt Disney Co. dropped 0.6 percent to $43.20. The world’s largest entertainment company said the box-office disappointment “John Carter” will post a loss of about $200 million, possibly the biggest ever for a single film.
Tiffany rallied 5.3 percent to $72.30. The company is benefiting from stock-market gains that have prompted luxury consumers to resume jewelry purchases, a turnabout from January, when the retailer said weak spending from U.S. customers had slowed holiday sales. New designs, such as Paloma Picasso’s Venezia collection introduced in the fall, helped boost fourth- quarter sales 7.8 percent to $1.19 billion.
U.S. stocks posted the best returns when 10-year Treasury yields rose to close to 4 percent, according to a study by Standard & Poor’s that tracked market performance since 1953.
The S&P 500 advanced 1.7 percent a month on average during periods when 10-year yields climbed to a range of 3 percent to 4 percent, according to data compiled by New York-based S&P. That’s the best performance among six categories of rising yields studied by the firm. Stocks began to fall when yields exceeded 6 percent, the study found.
‘Depressant’
While rising yields tend to boost borrowing costs for companies and act as “a depressant in intrinsic value calculations,” they can also suggest a strengthening economy and prompt investors to switch to equities, according to Sam Stovall, S&P’s chief equity strategist.
“The ‘sweet spot’ for equity prices appears to be a rising rate environment between 3 percent and 4 percent, as a growing economy reduces unemployment while increasing corporate earnings, yet does not trigger growth-slowing efforts by the central bank,” Stovall wrote in a report yesterday.
Stocks lower on worries about Chinese economic slowdown | NJ.com
U.S. stocks declined, snapping a three-day advance for the Standard & Poor’s 500 Index, as commodities fell on concern about a Chinese economic slowdown.
Freeport-McMoRan Copper & Gold Inc. and Cliffs Natural Resources Inc. dropped more than 2.7 percent as China raised fuel prices by the most in two years and BHP Billiton Ltd. said the nation’s steel production is slowing. Adobe Systems Inc. sank 3.6 percent as its profit forecast missed some estimates. Tiffany & Co. surged 5.3 percent after the second-largest luxury jewelry retailer forecast profit that beat projections.
The S&P 500 lost 0.8 percent to 1,398.29 at 9:44 a.m. New York time. The benchmark gauge for U.S. equities yesterday rose to the highest level since May 2008. The Dow Jones Industrial Average declined 109.32 points, or 0.8 percent, to 13,129.81.
“A Chinese slowdown is inevitable,” Peter Jankovskis, who helps manage about $2.9 billion at Oakbrook Investments in Lisle, Illinois, said in a telephone interview. “It’s possible that will take some of the heat out of commodities as they are the driver of demand. Yet China is not the only growth story out there. China will continue to be an important player, but the U.S. economy seems to have found its legs.”
Global stocks fell as China is raising fuel prices for the second time in less than six weeks. The nation’s vehicle sales may miss industry forecasts this year as economic growth slows, an official from the China Association of Automobile Manufacturers said. BHP Billiton Ltd., the world’s biggest mining company, said China’s steel production is slowing. In the U.S., data showed housing starts fell from a three-year high.
On Pace
The S&P 500 has rallied 11 percent this year and is on pace for the best first quarter since 1998 amid better-than-estimated economic and corporate reports. It trades at about 14.5 times reported earnings, the highest valuation level since July while still below the average since 1954 of 16.4 times earnings.
Energy and raw material shares slumped as the S&P GSCI commodity gauge dropped 1.4 percent. Freeport-McMoRan slid 2.7 percent to $38.10. Cliffs Natural Resources fell 4 percent to $70.23. Industrial shares also retreated. Joy Global Inc. lost 4.3 percent to $75.96. Caterpillar Inc. declined 2.3 percent to $111.16.
Adobe sank 3.6 percent to $33.28. Excluding some costs, profit will be 57 cents to 61 cents a share in the second quarter, Adobe said. The midpoint of that range -- 59 cents -- missed the 60 cents predicted by analysts, according to data compiled by Bloomberg. Sales will be $1.09 billion to $1.14 billion, compared with a $1.11 billion average estimate.
Box Office
Walt Disney Co. dropped 0.6 percent to $43.20. The world’s largest entertainment company said the box-office disappointment “John Carter” will post a loss of about $200 million, possibly the biggest ever for a single film.
Tiffany rallied 5.3 percent to $72.30. The company is benefiting from stock-market gains that have prompted luxury consumers to resume jewelry purchases, a turnabout from January, when the retailer said weak spending from U.S. customers had slowed holiday sales. New designs, such as Paloma Picasso’s Venezia collection introduced in the fall, helped boost fourth- quarter sales 7.8 percent to $1.19 billion.
U.S. stocks posted the best returns when 10-year Treasury yields rose to close to 4 percent, according to a study by Standard & Poor’s that tracked market performance since 1953.
The S&P 500 advanced 1.7 percent a month on average during periods when 10-year yields climbed to a range of 3 percent to 4 percent, according to data compiled by New York-based S&P. That’s the best performance among six categories of rising yields studied by the firm. Stocks began to fall when yields exceeded 6 percent, the study found.
‘Depressant’
While rising yields tend to boost borrowing costs for companies and act as “a depressant in intrinsic value calculations,” they can also suggest a strengthening economy and prompt investors to switch to equities, according to Sam Stovall, S&P’s chief equity strategist.
“The ‘sweet spot’ for equity prices appears to be a rising rate environment between 3 percent and 4 percent, as a growing economy reduces unemployment while increasing corporate earnings, yet does not trigger growth-slowing efforts by the central bank,” Stovall wrote in a report yesterday.
Stocks lower on worries about Chinese economic slowdown | NJ.com
I'm not sure how this indicates the Chinese are becoming more savvy other than that they are more personable than the Europeans. Considering the personal nature of this, I wouldn't be surprised if providing free passes to local bath houses with complimentary female masseuses are included. That's the sort of savvy this sounds like to me.
applesauce
SENIOR MEMBER
- Joined
- Jun 9, 2009
- Messages
- 3,579
- Reaction score
- 2
- Country
- Location
well alot of business deals are like that, lots of free "extras" for the negotiator if you catch my drift. this is especially common on wall street(ie: 10,000 dollar a night "escorts").
sweetgrape
BANNED
- Joined
- Dec 5, 2011
- Messages
- 2,780
- Reaction score
- -3
- Country
- Location
Chinese CFHI becomes the Top Suppliers of the Third Generation Nuclear Power Equipment in the World
Chinese CFHI becomes the Top Suppliers of the Third Generation Nuclear Power Equipment in the World | China's Great Science and Technology
China will continue to persist in the policy of developing nuclear power with high efficiency, promote the upgrade and independent research of nuclear power technology. Through bringing in and absorbing the third generation nuclear power technology, at present, CFHI (China First Heavy Industries) has become the provider on all key equipment of first batch of the third generation nuclear power AP1000 self-reliance project has been successfully finished, and a certain completed supply link system for the third generation nuclear power equipment has been formed. It can supply AP1000 nuclear island forging in whole set, become the unique important supplier which combines manufacturing capacity of nuclear power island forging and casting as well as complete set equipment of nuclear island in the world, and will continue to make important contribution to the manufacturing of CAP 1400 large scale nuclear power key special demonstration project nuclear island equipment.
CFHI can produce 10 sets of forging and casting for nuclear island and conventional island annually. By the end of 2011, CFHI has produced pressure vessel and pressurizer and other primary system main equipment of civil nuclear island for more than 10 sets, now has formed the production capacity of 5 sets of primary system main equipment of nuclear island annually, it has become one of the most important suppliers for global nuclear power equipment.
the first set of AP1000 nuclear power pressure vessel manufactured by CFHI
Since the end of 2009 AP1000 nuclear power tube sheet has passed the ex-work acceptance, CFHI has made a great breakthrough in manufacturing technology bottleneck for the third generation nuclear power large scale forging and casting, it can supply all the forgings necessary for main equipment such as reactor pressure vessel, steam generator, Core Makeup Tank and pressurizer for AP1000 RPV, from 2008 until Jan of this year, forging for AP1000 has been added up to 163 pieces, in which 116 pieces have been delivered , 47 pieces still being manufactured. At present, the first set of AP1000 nuclear power pressure vessel manufactured by CFHIcomponents of Sanmen Unit 2 pressure vessel schedules to be delivered next year for operation.
The manufacturing contract of Unit 1, 2 RPV of CAP1400 important special demonstration project nuclear island was signed with CFHI last year in advance. At present, the project contract has been started, relevant technology preparation has been implemented.
China to build its largest Robot Production base in 3 years
China to build its largest Robot Production base in 3 years | China's Great Science and Technology
2012-04-05 The construction of Chinas largest robot production base will be completed in 2015 in Tangshan, a city in central Chinas Hebei Province.
One completed, the base will have with an annual output value of 20 billion yuan, according to the Tangshan Robot Industry Development Program published recently,
Currently, the industrial base has been approved by the Ministry of Science and Technology of China and turned into a special industrial base of the National Torch Plan.
As an emerging strategic industry in Tangshan, robot production has been developing rapidly in recent years. In 2009, Chinas first mining rescue and detection robot was successfully developed in Tangshan, making China the second country mastering this technology following the United States.
The Tangshan Hi-tech Zone has realized the industrial production of six types of robots.Besides the mining rescue and detection robot, the pipe nondestructive examination robot has been used in many major energy projects including the West-East Natural Gas Transmission Project and Sichuan-East Natural Gas Transmission Project.
Chinese CFHI becomes the Top Suppliers of the Third Generation Nuclear Power Equipment in the World | China's Great Science and Technology
China will continue to persist in the policy of developing nuclear power with high efficiency, promote the upgrade and independent research of nuclear power technology. Through bringing in and absorbing the third generation nuclear power technology, at present, CFHI (China First Heavy Industries) has become the provider on all key equipment of first batch of the third generation nuclear power AP1000 self-reliance project has been successfully finished, and a certain completed supply link system for the third generation nuclear power equipment has been formed. It can supply AP1000 nuclear island forging in whole set, become the unique important supplier which combines manufacturing capacity of nuclear power island forging and casting as well as complete set equipment of nuclear island in the world, and will continue to make important contribution to the manufacturing of CAP 1400 large scale nuclear power key special demonstration project nuclear island equipment.
CFHI can produce 10 sets of forging and casting for nuclear island and conventional island annually. By the end of 2011, CFHI has produced pressure vessel and pressurizer and other primary system main equipment of civil nuclear island for more than 10 sets, now has formed the production capacity of 5 sets of primary system main equipment of nuclear island annually, it has become one of the most important suppliers for global nuclear power equipment.
the first set of AP1000 nuclear power pressure vessel manufactured by CFHI
Since the end of 2009 AP1000 nuclear power tube sheet has passed the ex-work acceptance, CFHI has made a great breakthrough in manufacturing technology bottleneck for the third generation nuclear power large scale forging and casting, it can supply all the forgings necessary for main equipment such as reactor pressure vessel, steam generator, Core Makeup Tank and pressurizer for AP1000 RPV, from 2008 until Jan of this year, forging for AP1000 has been added up to 163 pieces, in which 116 pieces have been delivered , 47 pieces still being manufactured. At present, the first set of AP1000 nuclear power pressure vessel manufactured by CFHIcomponents of Sanmen Unit 2 pressure vessel schedules to be delivered next year for operation.
The manufacturing contract of Unit 1, 2 RPV of CAP1400 important special demonstration project nuclear island was signed with CFHI last year in advance. At present, the project contract has been started, relevant technology preparation has been implemented.
China to build its largest Robot Production base in 3 years
China to build its largest Robot Production base in 3 years | China's Great Science and Technology
2012-04-05 The construction of Chinas largest robot production base will be completed in 2015 in Tangshan, a city in central Chinas Hebei Province.
One completed, the base will have with an annual output value of 20 billion yuan, according to the Tangshan Robot Industry Development Program published recently,
Currently, the industrial base has been approved by the Ministry of Science and Technology of China and turned into a special industrial base of the National Torch Plan.
As an emerging strategic industry in Tangshan, robot production has been developing rapidly in recent years. In 2009, Chinas first mining rescue and detection robot was successfully developed in Tangshan, making China the second country mastering this technology following the United States.
The Tangshan Hi-tech Zone has realized the industrial production of six types of robots.Besides the mining rescue and detection robot, the pipe nondestructive examination robot has been used in many major energy projects including the West-East Natural Gas Transmission Project and Sichuan-East Natural Gas Transmission Project.
sweetgrape
BANNED
- Joined
- Dec 5, 2011
- Messages
- 2,780
- Reaction score
- -3
- Country
- Location
Aizhai Bridge: the highest suspension bridge in world opens to traffic
Aizhai Bridge: the highest suspension bridge in world opens to traffic | China's Great Science and Technology
On March 31, 2012. Aizhai suspension bridge, with a main span of 1,176 meters and a maximum height of 330 meters, was open to traffic on Saturday. Spanning over the Dehang canyon, the bridge was built as part of the expressway from southwest China’s Chongqing Municipality to Changsha city in Hunan. Its completion would greatly improve the transportation between the two cities, according to authorities.
On the Morning of March 28 2010, the haulage cable has been successfully pulled from the Chadong Section to the Jishou Section on the opposite side of Dehang Grand Gorge by helium airship, which means the Aizhai Grand Suspension Bridge of the Jicha Highway has entered its main cable construction stage.
On 09:08 am, having flied across the 1,176-meter gorge, the airship reached the other side successfully 17 minutes later and made a connection between the two sides by a high-strength nylon rope with a diameter of millimeters.
According to the project director, the Aizhai Grand Suspension Bridge is a key project in the whole Jicha Highway program. With a main span of 1,176 meters and a subgrade width of 24.5 meters, this steel truss suspension bridge has the largest span in gorge throughout our country. The bridge is to be build in accordance with the highway standard of two lanes & four driveways, whose designed speed is 80 kilometers per hour As the bridge is located 335 meters over the Aizhai Town and the traffic below the bridge is heavy, it is proved that pulling the haulage cable by an airship would be the most convenient and safest way to start the project.
When it opens in 2012, Aizhai will be the world’s highest tunnel to tunnel bridge and the fourth suspension bridge in China to cross a valley so wide it seems to be connecting two mountain ranges. The first three were the Siduhe, Balinghe and Beipanjiang 2009 bridges. Of the world’s 400 or so highest bridges, none will have a main span as long as Aizhai with a tower to tower distance of 3,858 feet (1,176 mtrs). Located deep in the heart of China’s Hunan Province near the city of Jishou, the suspension bridge is the largest structure on the Jishou to Chadong expressway with a deck 1,083 feet (330 mtrs) above the DeHang Canyon.
The bridge in morning
The two tunnels on either side of the Aizhai bridge allowed the engineers to use the mountain top for the location of one of the towers, reducing its height to just 165 feet (50 mtrs) – unusually short for a bridge with a span nearly as long as the Golden Gate bridge at 3,858 feet (1176 mtrs). In addition to cost savings, the stubby support also allows the bridge to blend more naturally into its surroundings. The taller bridge tower is no less unique with side span cables that soar down the backside of a mountain, making first time visitors quizzical as to what exactly lies ahead. With most of the structure hidden from view, the bridge will come as a jaw-dropping surprise whether you enter the canyon from either tunnel. Due to a gap of approximately 328 feet (100 mtrs) between the last truss suspenders and the tops of the bridge towers, the engineers added some additional ground anchored suspenders to stabilize the two massive suspension cables and reduce any oscillations that could damage other components of the bridge. An overlook and visitors center will offer additional views of the broad valley.
Asia’s largest rotating radio telescope to be completed in Sheshan, Shanghai
Asia’s largest rotating radio telescope to be completed in Sheshan, Shanghai | China's Great Science and Technology
Sheshan in Shanghai will build Asia’s largest rotating radio telescope at the caliber of 65 meters. It will be completed in 2012 as the largest rotatable radio telescope in Asia, only next to the 110m-diameter telescope based in the United States and the 110m-diameter telescope based in Germany.
The Shanghai Astronomical Observatory was funded in 2008 by the Chinese Academy of Sciences and the Science and Technology Commission of Shanghai Municipality to build a 65 meter radio telescope for both space-related and radio astronomical observations. The project was supported by the Shanghai government to locate the telescope at Shanghai Sheshan area, in the same region the first Chinese VLBI station of a 25 meter in diameter radio telescope was constructed in 1987.
The Shanghai 65 meter radio telescope is designed to be a general purpose, fully steerable antenna. It will have a main reflector of 65 meter in diameter in a shaped Cassegrain configuration with a primary focal ratio of 0.32. The primary active surface control system will be installed to compensate (mainly) the repeatable gravitational deformations to maintain the nominal shape of the primary reflector, and then to reach the best performance even at high frequencies. The main structural constraints for the antenna design are the surface accuracy and the pointing accuracy. The primary reflector consists of a total of 1008 aluminum panels in 14 rings, and at its back about 1112 electromechanical actuators will be mounted at each corner of four adjacent panels. A custom actuator design is now under way. The telescope is currently designed to operate to 15 GHz without use of the active surface system. The antenna will be equipped with receivers to cover 8 frequency bands from 1.4 GHz to 43 GHz, including L-, S-, C-, X-, Ku-, K-, Ka-, and Q-band. Among those, both S/X and X/Ka are dual-frequency bands. The Shanghai 65 meter radio telescope now is in its full construction phase.
The new radio telescope will find application in deep space exploration missions and basic astronomy research. It will also be used in China’s lunar exploration program as an important part of China’s Very Long Baseline Interferometry (VLBI) array system of radio telescopes.
Currently, the VLBI network in China is composed of four telescopes in shanghai, Beijing, Kunming and Urumqi.
The VLBI successfully carried out orbit determination and positioning in the launching of the lunar obitor Chang’e -1. The 65m-diameter telescope will guide the lunar rover’s way to the moon together with other VLBI telescopes when the second phase of the country’s lunar exploration program is carried out in 2012.
“We have been making efforts in the past 30 years to develop VLBI technology, and contribute to the international astronomic research,” said Shen Zhiqiang, a research professor with the observatory. “We are proud that the technology was used in the lunar exploration.”
The telescope will also be included in the East Asia VLBI consortium which consists of 19 radio telescopes so far from China, Japan and the Republic of Korea (ROK).
Meanwhile, astronomical observatories from China, Japan and South Korea will increase cooperation to build the current radio telescope network to East Asia’s VLBI observational network, which will be in service in 2010 with the largest number of telescopes.
China has built World’s Largest Tracking Solar Power Station in Ningxia
China has built World’s Largest Tracking Solar Power Station in Ningxia | China's Great Science and Technology
China ENFI Engineering Corp. (ENFI) announced that, ENFI Ningxia Zhongwei Tianjingshan 30MW Photovoltaic Power Works, which was under full-process planning, investment, construction and operation by ENFI, was successfully combined to the grid and put into commissioning on December 22, 2011.
As a tracking solar photovoltaic power station with the maximum installed capacity at the present in the whole world, it is fully equipped with the intelligent linkage tracking system which is independently developed by ENFI. This system is featured by accurate solar tracking device and stable power generation indicators, which will greatly enhance the volume and quality of photovoltaic power generation and will be easily combined to the grid and operated. Comparing with the traditional solar photovoltaic power station, it will contribute an increase of about 25% in power output and the annual average generated energy will be up to 54 million KWH. On this ground, a total increase of 270 million KWH during the 25-year operation period.
This project is contracted by ENFI on an EPC basis. The construction works under the first phase (10MW) was formally commenced in March 2011 and completed in August in this year; the second phase (20MW) was started in October 2011, and completion acceptance as fulfilled in November 2011, marking a new record in terms of the construction speed of solar photovoltaic power station. In addition, the commissioning and grid connection works for the 30MW solar photovoltaic power station was successfully finished at one go-off, enabling the facility to generate benefit in the same year of construction. Taking advantage of technical R&D, fine design and scientific management, ENFI has stepped onto a new level in terms of the scientific technology and the power generation efficiency in this industry. As a matter of fact, a saving of 20% was realized on the investment costs and a satisfactory EPC benefit was eventually achieved.
Under this project, solar energy is utilized for power generation in a zero-emission manner, which will reduce the same volume of conventional thermal power supplied for the national grid, thus the annual average emission deduction of carbon dioxide will be 51,500 tons, and a total reduction of 1.3 million tons will be realized during the 25-year operational period. Comparing with the traditional thermal power works, the implementation of this project will bring about more favorable results such as: (i) coal saving for coal-fired power station; (ii) reduction of greenhouse gas emission; (iii) increasing of power supply and CDM (Clean Development Mechanism) achievements; and (iv) bringing about perfect economic benefits and long-lasting environmental benefits.
Aizhai Bridge: the highest suspension bridge in world opens to traffic | China's Great Science and Technology
On March 31, 2012. Aizhai suspension bridge, with a main span of 1,176 meters and a maximum height of 330 meters, was open to traffic on Saturday. Spanning over the Dehang canyon, the bridge was built as part of the expressway from southwest China’s Chongqing Municipality to Changsha city in Hunan. Its completion would greatly improve the transportation between the two cities, according to authorities.
On the Morning of March 28 2010, the haulage cable has been successfully pulled from the Chadong Section to the Jishou Section on the opposite side of Dehang Grand Gorge by helium airship, which means the Aizhai Grand Suspension Bridge of the Jicha Highway has entered its main cable construction stage.
On 09:08 am, having flied across the 1,176-meter gorge, the airship reached the other side successfully 17 minutes later and made a connection between the two sides by a high-strength nylon rope with a diameter of millimeters.
According to the project director, the Aizhai Grand Suspension Bridge is a key project in the whole Jicha Highway program. With a main span of 1,176 meters and a subgrade width of 24.5 meters, this steel truss suspension bridge has the largest span in gorge throughout our country. The bridge is to be build in accordance with the highway standard of two lanes & four driveways, whose designed speed is 80 kilometers per hour As the bridge is located 335 meters over the Aizhai Town and the traffic below the bridge is heavy, it is proved that pulling the haulage cable by an airship would be the most convenient and safest way to start the project.
When it opens in 2012, Aizhai will be the world’s highest tunnel to tunnel bridge and the fourth suspension bridge in China to cross a valley so wide it seems to be connecting two mountain ranges. The first three were the Siduhe, Balinghe and Beipanjiang 2009 bridges. Of the world’s 400 or so highest bridges, none will have a main span as long as Aizhai with a tower to tower distance of 3,858 feet (1,176 mtrs). Located deep in the heart of China’s Hunan Province near the city of Jishou, the suspension bridge is the largest structure on the Jishou to Chadong expressway with a deck 1,083 feet (330 mtrs) above the DeHang Canyon.
The bridge in morning
The two tunnels on either side of the Aizhai bridge allowed the engineers to use the mountain top for the location of one of the towers, reducing its height to just 165 feet (50 mtrs) – unusually short for a bridge with a span nearly as long as the Golden Gate bridge at 3,858 feet (1176 mtrs). In addition to cost savings, the stubby support also allows the bridge to blend more naturally into its surroundings. The taller bridge tower is no less unique with side span cables that soar down the backside of a mountain, making first time visitors quizzical as to what exactly lies ahead. With most of the structure hidden from view, the bridge will come as a jaw-dropping surprise whether you enter the canyon from either tunnel. Due to a gap of approximately 328 feet (100 mtrs) between the last truss suspenders and the tops of the bridge towers, the engineers added some additional ground anchored suspenders to stabilize the two massive suspension cables and reduce any oscillations that could damage other components of the bridge. An overlook and visitors center will offer additional views of the broad valley.
Asia’s largest rotating radio telescope to be completed in Sheshan, Shanghai
Asia’s largest rotating radio telescope to be completed in Sheshan, Shanghai | China's Great Science and Technology
Sheshan in Shanghai will build Asia’s largest rotating radio telescope at the caliber of 65 meters. It will be completed in 2012 as the largest rotatable radio telescope in Asia, only next to the 110m-diameter telescope based in the United States and the 110m-diameter telescope based in Germany.
The Shanghai Astronomical Observatory was funded in 2008 by the Chinese Academy of Sciences and the Science and Technology Commission of Shanghai Municipality to build a 65 meter radio telescope for both space-related and radio astronomical observations. The project was supported by the Shanghai government to locate the telescope at Shanghai Sheshan area, in the same region the first Chinese VLBI station of a 25 meter in diameter radio telescope was constructed in 1987.
The Shanghai 65 meter radio telescope is designed to be a general purpose, fully steerable antenna. It will have a main reflector of 65 meter in diameter in a shaped Cassegrain configuration with a primary focal ratio of 0.32. The primary active surface control system will be installed to compensate (mainly) the repeatable gravitational deformations to maintain the nominal shape of the primary reflector, and then to reach the best performance even at high frequencies. The main structural constraints for the antenna design are the surface accuracy and the pointing accuracy. The primary reflector consists of a total of 1008 aluminum panels in 14 rings, and at its back about 1112 electromechanical actuators will be mounted at each corner of four adjacent panels. A custom actuator design is now under way. The telescope is currently designed to operate to 15 GHz without use of the active surface system. The antenna will be equipped with receivers to cover 8 frequency bands from 1.4 GHz to 43 GHz, including L-, S-, C-, X-, Ku-, K-, Ka-, and Q-band. Among those, both S/X and X/Ka are dual-frequency bands. The Shanghai 65 meter radio telescope now is in its full construction phase.
The new radio telescope will find application in deep space exploration missions and basic astronomy research. It will also be used in China’s lunar exploration program as an important part of China’s Very Long Baseline Interferometry (VLBI) array system of radio telescopes.
Currently, the VLBI network in China is composed of four telescopes in shanghai, Beijing, Kunming and Urumqi.
The VLBI successfully carried out orbit determination and positioning in the launching of the lunar obitor Chang’e -1. The 65m-diameter telescope will guide the lunar rover’s way to the moon together with other VLBI telescopes when the second phase of the country’s lunar exploration program is carried out in 2012.
“We have been making efforts in the past 30 years to develop VLBI technology, and contribute to the international astronomic research,” said Shen Zhiqiang, a research professor with the observatory. “We are proud that the technology was used in the lunar exploration.”
The telescope will also be included in the East Asia VLBI consortium which consists of 19 radio telescopes so far from China, Japan and the Republic of Korea (ROK).
Meanwhile, astronomical observatories from China, Japan and South Korea will increase cooperation to build the current radio telescope network to East Asia’s VLBI observational network, which will be in service in 2010 with the largest number of telescopes.
China has built World’s Largest Tracking Solar Power Station in Ningxia
China has built World’s Largest Tracking Solar Power Station in Ningxia | China's Great Science and Technology
China ENFI Engineering Corp. (ENFI) announced that, ENFI Ningxia Zhongwei Tianjingshan 30MW Photovoltaic Power Works, which was under full-process planning, investment, construction and operation by ENFI, was successfully combined to the grid and put into commissioning on December 22, 2011.
As a tracking solar photovoltaic power station with the maximum installed capacity at the present in the whole world, it is fully equipped with the intelligent linkage tracking system which is independently developed by ENFI. This system is featured by accurate solar tracking device and stable power generation indicators, which will greatly enhance the volume and quality of photovoltaic power generation and will be easily combined to the grid and operated. Comparing with the traditional solar photovoltaic power station, it will contribute an increase of about 25% in power output and the annual average generated energy will be up to 54 million KWH. On this ground, a total increase of 270 million KWH during the 25-year operation period.
This project is contracted by ENFI on an EPC basis. The construction works under the first phase (10MW) was formally commenced in March 2011 and completed in August in this year; the second phase (20MW) was started in October 2011, and completion acceptance as fulfilled in November 2011, marking a new record in terms of the construction speed of solar photovoltaic power station. In addition, the commissioning and grid connection works for the 30MW solar photovoltaic power station was successfully finished at one go-off, enabling the facility to generate benefit in the same year of construction. Taking advantage of technical R&D, fine design and scientific management, ENFI has stepped onto a new level in terms of the scientific technology and the power generation efficiency in this industry. As a matter of fact, a saving of 20% was realized on the investment costs and a satisfactory EPC benefit was eventually achieved.
Under this project, solar energy is utilized for power generation in a zero-emission manner, which will reduce the same volume of conventional thermal power supplied for the national grid, thus the annual average emission deduction of carbon dioxide will be 51,500 tons, and a total reduction of 1.3 million tons will be realized during the 25-year operational period. Comparing with the traditional thermal power works, the implementation of this project will bring about more favorable results such as: (i) coal saving for coal-fired power station; (ii) reduction of greenhouse gas emission; (iii) increasing of power supply and CDM (Clean Development Mechanism) achievements; and (iv) bringing about perfect economic benefits and long-lasting environmental benefits.
epsilon
FULL MEMBER
- Joined
- Apr 20, 2012
- Messages
- 170
- Reaction score
- 0
Congrats chinese comrades ur doing well and good. One thing tat itches me "your historical and cultural buildings are being devastated". Cultural buildings speaks about cultural heritage to next generations.
Undoubtedly china is now a super power
all my wishes to u
Undoubtedly china is now a super power
all my wishes to u
rcrmj
SENIOR MEMBER
- Joined
- Jan 5, 2011
- Messages
- 6,322
- Reaction score
- -12
- Country
- Location
Congrats chinese comrades ur doing well and good. One thing tat itches me "your historical and cultural buildings are being devastated". Cultural buildings speaks about cultural heritage to next generations.
Undoubtedly china is now a super power
we dont like tradional stuff been destroyed too``but you know China took capitalism to an extreem!
sweetgrape
BANNED
- Joined
- Dec 5, 2011
- Messages
- 2,780
- Reaction score
- -3
- Country
- Location
World's First High-Tc Superconducting Power Substation Put Into Operation in Power Grid in China's Gansu Province
World's First High-Tc Superconducting Power Substation Put Into Operation in Power Grid in China's Gansu Province---Chinese Academy Of Sciences
The world's first High-Tc superconducting power substation, which was developed by the Institute of Electrical Engineering, Chinese Academy of Sciences (IEE CAS), was put into operation officially in the power grid in Baiyin city, Gansu province, China.
The substation with voltage level of 10.5 kV, which is located at the National High-Tech Industry Park in Baiyin city, integrates a 1 MJ/0.5 MVA high temperature superconducting (HTS) magnetic energy storage devices (SMES), a 3-phase 1.5 kA high-Tc superconducting fault current limiters (SFCL), a 630 kVA high temperature superconducting (HTS) transformer, and a 75m long/1.5 kA 3-phase AC HTS transmission cable. These new-type superconducting power devices can enhance the stability and reliability of the grid, improve the power quality, decrease the system losses and reduce the occupation area of substation.
Till now, it is the only distribution-level High-Tc superconducting substation in the world, which creates the world’s first and China’s first in many areas. Nearly 70 completely independent intellectual property rights were obtained. It integrates the latest and the most advanced research results of superconducting power technology of recent 10 years in China. The operation of the power substation marked a significant breakthrough of China's superconducting power technology.
World's First High-Tc Superconducting Power Substation Put Into Operation in Power Grid in China's Gansu Province---Chinese Academy Of Sciences
The world's first High-Tc superconducting power substation, which was developed by the Institute of Electrical Engineering, Chinese Academy of Sciences (IEE CAS), was put into operation officially in the power grid in Baiyin city, Gansu province, China.
The substation with voltage level of 10.5 kV, which is located at the National High-Tech Industry Park in Baiyin city, integrates a 1 MJ/0.5 MVA high temperature superconducting (HTS) magnetic energy storage devices (SMES), a 3-phase 1.5 kA high-Tc superconducting fault current limiters (SFCL), a 630 kVA high temperature superconducting (HTS) transformer, and a 75m long/1.5 kA 3-phase AC HTS transmission cable. These new-type superconducting power devices can enhance the stability and reliability of the grid, improve the power quality, decrease the system losses and reduce the occupation area of substation.
Till now, it is the only distribution-level High-Tc superconducting substation in the world, which creates the world’s first and China’s first in many areas. Nearly 70 completely independent intellectual property rights were obtained. It integrates the latest and the most advanced research results of superconducting power technology of recent 10 years in China. The operation of the power substation marked a significant breakthrough of China's superconducting power technology.
avene
FULL MEMBER
New Recruit
- Joined
- Apr 12, 2012
- Messages
- 33
- Reaction score
- 0
China's Ya'an-Xichang Expressway will be open to traffic by May 1, 2012
The 3 billion USD highway project was started by the central government of China in 2007. This project is expected to play a key role in lifting millions of Tibetan, Han, Yi and Muslim Hui people out of poverty. The greatly improved transportation system is also expected to support sustainable economic growth in resource-rich western Sichuan, which is known as the poorest region of China.
More than half （54%）of the 244-kilometer-long highway is tunnels and bridges among mountains. Ganhaizi tunnel is a rarely-seen dual-spiral tunnel. Labajin bridge and Aizhai are among the highest bridges in the world.
Animation of the Ya'an-Xichang expressway
[video]http://v.youku.com/v_show/id_XMzI4MzQzMjQ4.html[/video] (higher resolusion)
[video]http://www.********.com/view?i=4ed_1328320438[/video]
The 3 billion USD highway project was started by the central government of China in 2007. This project is expected to play a key role in lifting millions of Tibetan, Han, Yi and Muslim Hui people out of poverty. The greatly improved transportation system is also expected to support sustainable economic growth in resource-rich western Sichuan, which is known as the poorest region of China.
More than half （54%）of the 244-kilometer-long highway is tunnels and bridges among mountains. Ganhaizi tunnel is a rarely-seen dual-spiral tunnel. Labajin bridge and Aizhai are among the highest bridges in the world.
Animation of the Ya'an-Xichang expressway
[video]http://v.youku.com/v_show/id_XMzI4MzQzMjQ4.html[/video] (higher resolusion)
[video]http://www.********.com/view?i=4ed_1328320438[/video]
Last edited by a moderator:
avene
FULL MEMBER
New Recruit
- Joined
- Apr 12, 2012
- Messages
- 33
- Reaction score
- 0
continued
Aizhai Bridge
矮寨特大桥
Jishou, Hunan, China
1,102 feet high / 336 meters high
3,858 foot span / 1,176 meter span
2012
Aizhai is the world’s highest tunnel to tunnel bridge and the fourth suspension bridge in China to cross a valley so wide it seems to be connecting two mountain ranges.
Aizhai Bridge
矮寨特大桥
Jishou, Hunan, China
1,102 feet high / 336 meters high
3,858 foot span / 1,176 meter span
2012
Aizhai is the world’s highest tunnel to tunnel bridge and the fourth suspension bridge in China to cross a valley so wide it seems to be connecting two mountain ranges.
Similar threads
