S-DUCT
FULL MEMBER
- Joined
- Jan 29, 2013
- Messages
- 619
- Reaction score
- 0
@sancho Sir,
From the above picture, even an amateur eye can make out that what was envisioned as an article incorporating certain 5th gen elements has been converted into a project aiming at proper VLO. Not even LO but VLO. While the above model is not rich in details nor particularly high quality it clearly shows a very complex edge alignment, chining and disciplined shaping but that's just the surface when it comes to VLO. Helleven the aft and lower fuselage has been shaped for LO.
Once such a "VLO" airframe is up and running, how will the DRDO/ADA provide for extensive robotic surface coating treatment or appliqué laminate tech, VLO/LO rated antennas, radome with incorporated frequency selective multilayer laminate tech, etc.? Even at best we'll just end up with a shell with 4th gen LRUs, no proper engine or AESA radar. What are these fellows smoking?
IMO,The aircraft is not shaped for all aspect stealth, like the US Raptor (F-22) . Instead, shaping is optimized to minimize frontal Radar Cross Section (RCS).ADA has made little attempt to reduce the radar signature of the aircraft from the rear, relying almost entirely on a reduced IR signature instead. A reduced RCS from the rear is difficult to achieve without very advanced engine technology represented by shaped exhaust nozzles as in the case of the Raptor, or a compromise on performance.
Frequency selective surface (FSS) technology is under development.
DMSRDE has also developed RAM for AURA & AMCA.
Last edited by a moderator: