true
i will first try my best for ak47 licence if i can get my hands on it.
second option is 222
Don't go for 222. Its Ammo is very expensive and Hard to Find. Only Good 222 Ammo you can find in local market is of Wolf.
7.62 AK is the best option. Its ammunition is available easily and cheap. But remember dont go for the old Milled Receiver AK47, go for Stamped AKM. Or if you cannot get a russian AKM, Go for Chinese T56.
The Easiest difference between AKM and AK47 is the wedge shaped Muzzle Break at the end of the barrel of AKM. And the depression mark just above the magazine on right side is very large on AK47 while it is just like a small spot on AKM.
Out of the box, in my opinion. If you can get a full auto 9mm SMG Specially, MP5 it is a delight. It does not have the "Shashka" of AK. But i love those small beasts. Dirt Cheap Ammo, Reliable, Literally no recoil.
Plus i doubt you can even find a Russian 5.45 (222) now a days in market. The Larger buttstock version is almost impossible. Even Krinkovs are extinct. Only Local made copies all around.
You might be able to obtain a semi auto 222 license. The 222s in Pakistan are almost all local made semi autos. But you might just be able to register a Russian 101 or 74 or that license. Provided your cousin has the connections.
I haven’t heard of a semi auto orginal Russian 5.45/222.
Also with weapons you always need to check and examine it inside out or purchasing it. You never know some part might have a different serial number.
Good luck finding a Full butt stock 74 or 101 in the first place in Pakistan.Or even finding one and getting it without selling your car or kidney
You can’t get a 556 on a 223 license. So that narrows down your options quite a bit. I know the rounds are almost identical. 556nato is pb since it’s auto. M4s and m16 clearly have 556 stated on them so.
As for 545, get an ak74 or a newer ak100 series on it, you won’t regret it.
I’d always recommend purchasing original imported weapon. And not the clones. Compare type56 to an ak for example. Not much difference lookwise but hell of a difference performance wise. Similarly, No point in purchasing a Chinese or local clone of m4 either. You won’t be able to pass 5 clips on full auto non stop. Difference In rifling chrome plating and the metallurgy of the metal in general.
.
Dear Sir no offence but have you Fired T-56 and AK side by side?
And have you Tried shooting Norinco CQ with your own hands?
When was the last time you saw Chinese T-56 Jamming a round? Its much better then the original Pre 65 milled Russian Ak47 which are pathetic and heavy.
Norinco CQ is a Quality firearm very much comparable with original M16s, Smooth Balanced and High Quality, Its nothing like the Cheap Local Clones.
Cant say about CQA which is M4 copy because i don't have any personal experience with it. But i am sure it will also be great.
Are you using Good Quality Ammo? It depends a lot on Ammunition as well.
Why are you Comparing Chinese Guns with Local Clones?.
Even Chinese made T-54 Tokarev Clones are top notch and comparable to Russian TT.