abbasniazi
SENIOR MEMBER
- Joined
- Aug 16, 2008
- Messages
- 1,149
- Reaction score
- 0
- Country
- Location
when it comes to weapons, mans creative and dare I say artistic, ingenuity comes to the fore. If it is possible to have one weapon, then why not turn that weapon into two by fixing a blade or a club on it? As for pistols lets have six barrels, a muff pistol, a palm pistol, or a ring pistol. This is a look at some interesting and some unusual antique guns that gunsmiths have created in the past.
Also here, is the gun described as the most beautiful gun in the world
(Cased Percussion Pepperbox Pistol)
The Development of the Firing Mechanism
In simplistic terms, the earliest forms of firing mechanism involved manually placing a burning ember or flame to a hole in the top of the barrel of a gun. This was replaced by a matchlock, which basically was a method of securing a very slow burning fuse (known as a match) to the side of the gun, which was introduced to the touch hole to explode the powder in the gun.
Of course wet conditions or an ember in close proximity to the powder were not the most favourable of situations and accidents with muskets were not uncommon
The breakthrough came with the invention of the Wheellock.
This involved mechanically moving a scored disk of steel against a piece of mineral called pyrite to cause sparks. The easiest way to understand this is to look at a modern flint cigarette lighter. This works in basically the same way.
The mechanism of the Wheelock was rather complicated and there were attempts to simplify it. There were several variations but one of the most popular was a Dutch invention called the Snaphaunce. (Derived from the Dutch snap haan meaning snapping hen, a reference to the movement of the arm containing the flint.) There were problems because of a need to have a moveable cap over the ignition hole, to stop accidental ignition and to keep the powder dry.
However it was not until the invention of the Flintlock in France by Marin Le Bourgeoys that a far more reliable mechanism came into being. This involved an arm containing a piece of flint striking a metal L shaped plate. This not only caused a spark but forced the plate to uncover the touch hole at the same moment.
This was a system that would last for around two and a half centuries until the development of percussion methods of firing took over.
Of course as well as working on the firing mechanism, gunsmiths were also looking at ways of developing the guns themselves
Combined Pernach Mace and Wheellock Pistol
The oldest weapon here is a combination of a pistol and a mace. It is from Northern Europe, from Saxony, from the last quarter of the 16th century (1575-1600). It is on display in The Military Historical Museum of Artillery, Engineer and Signal Corps (founded in 1703 in St Petersburg, Russia by Peter the Great.)
This gun/club almost signals a time of transition from knight in armour to cavalryman or infantryman. It is interesting to note the straight stock-style handle and the intricate decoration. The decoration indicates that the weapon would have been made for a member of a wealthy family and not a commoner.
Over and Under Flintlock Pistol
The problem with a muzzle loaded gun is that once it has been fired it is necessary to pause to reload with ball and powder. Not very helpful if you are being attacked by more than one assailant. One alternative would be to have more than one gun. Again not very comfortable for a man about town wanting to protect himself from a mugging. Much lighter would be one pistol with two barrels. Several companies began manufacturing double barrel pistols such as the one shown above made by the gunsmiths Hill of London.
Six Shot Percussion Pepper Box Revolver
If two barrels were useful, how much more useful six barrels would be. Like this one manufactured by Blunt and Syms of New York.
The pepperbox or pepper pot pistol has appeared with all the various firing mechanisms previously mentioned. The principle has always been basically the same. A solid unit consisting (in this case) of six barrels rotates around an axis. Each pull of the trigger caused the barrels to rotate through 60 degrees thus lining the next barrel up for firing. Because of the problem of weight, the barrels were usually no longer than three inches (3.5cm) long. It is easy to see from this, how the potential for reducing the size of the barrels to form chambers and putting one barrel in front of the chambers would lead to the development of the revolver.
The example shown above has a ring trigger.
CONTINUED IN THE NEXT POST...
Also here, is the gun described as the most beautiful gun in the world
(Cased Percussion Pepperbox Pistol)
The Development of the Firing Mechanism
In simplistic terms, the earliest forms of firing mechanism involved manually placing a burning ember or flame to a hole in the top of the barrel of a gun. This was replaced by a matchlock, which basically was a method of securing a very slow burning fuse (known as a match) to the side of the gun, which was introduced to the touch hole to explode the powder in the gun.
Of course wet conditions or an ember in close proximity to the powder were not the most favourable of situations and accidents with muskets were not uncommon
The breakthrough came with the invention of the Wheellock.
This involved mechanically moving a scored disk of steel against a piece of mineral called pyrite to cause sparks. The easiest way to understand this is to look at a modern flint cigarette lighter. This works in basically the same way.
The mechanism of the Wheelock was rather complicated and there were attempts to simplify it. There were several variations but one of the most popular was a Dutch invention called the Snaphaunce. (Derived from the Dutch snap haan meaning snapping hen, a reference to the movement of the arm containing the flint.) There were problems because of a need to have a moveable cap over the ignition hole, to stop accidental ignition and to keep the powder dry.
However it was not until the invention of the Flintlock in France by Marin Le Bourgeoys that a far more reliable mechanism came into being. This involved an arm containing a piece of flint striking a metal L shaped plate. This not only caused a spark but forced the plate to uncover the touch hole at the same moment.
This was a system that would last for around two and a half centuries until the development of percussion methods of firing took over.
Of course as well as working on the firing mechanism, gunsmiths were also looking at ways of developing the guns themselves
Combined Pernach Mace and Wheellock Pistol
The oldest weapon here is a combination of a pistol and a mace. It is from Northern Europe, from Saxony, from the last quarter of the 16th century (1575-1600). It is on display in The Military Historical Museum of Artillery, Engineer and Signal Corps (founded in 1703 in St Petersburg, Russia by Peter the Great.)
This gun/club almost signals a time of transition from knight in armour to cavalryman or infantryman. It is interesting to note the straight stock-style handle and the intricate decoration. The decoration indicates that the weapon would have been made for a member of a wealthy family and not a commoner.
Over and Under Flintlock Pistol
The problem with a muzzle loaded gun is that once it has been fired it is necessary to pause to reload with ball and powder. Not very helpful if you are being attacked by more than one assailant. One alternative would be to have more than one gun. Again not very comfortable for a man about town wanting to protect himself from a mugging. Much lighter would be one pistol with two barrels. Several companies began manufacturing double barrel pistols such as the one shown above made by the gunsmiths Hill of London.
Six Shot Percussion Pepper Box Revolver
If two barrels were useful, how much more useful six barrels would be. Like this one manufactured by Blunt and Syms of New York.
The pepperbox or pepper pot pistol has appeared with all the various firing mechanisms previously mentioned. The principle has always been basically the same. A solid unit consisting (in this case) of six barrels rotates around an axis. Each pull of the trigger caused the barrels to rotate through 60 degrees thus lining the next barrel up for firing. Because of the problem of weight, the barrels were usually no longer than three inches (3.5cm) long. It is easy to see from this, how the potential for reducing the size of the barrels to form chambers and putting one barrel in front of the chambers would lead to the development of the revolver.
The example shown above has a ring trigger.
CONTINUED IN THE NEXT POST...