艹艹艹
SENIOR MEMBER
- Joined
- Jul 7, 2016
- Messages
- 5,198
- Reaction score
- 0
- Country
- Location
Over the past few months, Unitree G1 robot has been upgraded into a mass production version, with stronger performance, ultimate appearance, and being more in line with mass production requirements.
China's Unitree Robotics is a relatively recent entry in the general-purpose humanoid robot space, but its $16,000 G1 model is already proving itself to be quite the performer. So much so that the company has now revealed a version that's ready for mass production.
Unitree says that the few short months since its May reveal has seen engineers fine-tuning the general-purpose bot to meet requirements for mass production – including tweaks to its appearance and improvements in performance. The video demonstrates this by showing off the G1's leaping, twisting, hopping and dancing moves, along with its ability to climb stairs littered with debris and adjust gait in real-time, take varied-height obstacles in its stride, and break into a jog. It's even shown steadfastly refusing to tumble when faced with a seemingly vicious assault from one of the dev team.
A quick recap of the given specs doesn't reveal any obvious enhancements since we last checked in, though the simulated reinforcement learning environment has yielded new tricks and improved performance. So what we have is a humanoid that stands 1.32 m (4.33 ft) in height and can fold down to 690 x 450 x 300 mm (27 x 17.7 x 11.8 in) should an operator wish to pick it up and stow it away in a cupboard – though it's quite a heft at 35 kg (77 lb).
On its LED-ringed face are 3D LiDAR and a RealSense depth camera. There's noise-canceling microphone array included for voice commands and a 5-W stereo speaker for responses. All cabling is routed internally for clean lines and snag-free operation. A quick-release 9,000-mAh battery is included for around 2 hours of per-charge use. The joints offer 23 degrees of freedom in total and the humanoid can amble along at up to 2 m/s (4.5 mph).
China's Unitree Robotics is a relatively recent entry in the general-purpose humanoid robot space, but its $16,000 G1 model is already proving itself to be quite the performer. So much so that the company has now revealed a version that's ready for mass production.
Unitree says that the few short months since its May reveal has seen engineers fine-tuning the general-purpose bot to meet requirements for mass production – including tweaks to its appearance and improvements in performance. The video demonstrates this by showing off the G1's leaping, twisting, hopping and dancing moves, along with its ability to climb stairs littered with debris and adjust gait in real-time, take varied-height obstacles in its stride, and break into a jog. It's even shown steadfastly refusing to tumble when faced with a seemingly vicious assault from one of the dev team.
A quick recap of the given specs doesn't reveal any obvious enhancements since we last checked in, though the simulated reinforcement learning environment has yielded new tricks and improved performance. So what we have is a humanoid that stands 1.32 m (4.33 ft) in height and can fold down to 690 x 450 x 300 mm (27 x 17.7 x 11.8 in) should an operator wish to pick it up and stow it away in a cupboard – though it's quite a heft at 35 kg (77 lb).
On its LED-ringed face are 3D LiDAR and a RealSense depth camera. There's noise-canceling microphone array included for voice commands and a 5-W stereo speaker for responses. All cabling is routed internally for clean lines and snag-free operation. A quick-release 9,000-mAh battery is included for around 2 hours of per-charge use. The joints offer 23 degrees of freedom in total and the humanoid can amble along at up to 2 m/s (4.5 mph).
