N46 Scorpion Rifle

[Zarvan]

The M56 was manufactured from 1953 to 1959 by the Cadillac Motor Car Division of General Motors for use by US airborne forces, though the vehicle was eventually used by the Spanish Navy Marines and Morocco as well. With a crew of four (commander, gunner, loader and driver), the M56 weighed 6.4 tonnes (14,000 lb) empty -and 7.7 tonnes (17,000 lb) combat -loaded. It had infrared driving lights but noNuclear, Biological and Chemical (NBC) protection -system and was not amphibious. The M56 was a fully tracked vehicle with rubber -tired run -flat road wheels and front -drive sprocket wheels. It was powered by a ContinentalA01-403-5 gasoline engine developing 200 brake horsepower (150 kW) at 3,000 rpm, allowing a maximum road speed of 28 miles per hour (45 km/h) and a maximum -range of 140 miles (230 km). Twenty-nine rounds of main gun ammunition were carried, and only the blast shield was armored.
NEWS: SCORPION RIFLE N46

 

[Indus Falcon]

The M56 was manufactured from 1953 to 1959 by the Cadillac Motor Car Division of General Motors for use by US airborne forces, though the vehicle was eventually used by the Spanish Navy Marines and Morocco as well. With a crew of four (commander, gunner, loader and driver), the M56 weighed 6.4 tonnes (14,000 lb) empty -and 7.7 tonnes (17,000 lb) combat -loaded. It had infrared driving lights but noNuclear, Biological and Chemical (NBC) protection -system and was not amphibious. The M56 was a fully tracked vehicle with rubber -tired run -flat road wheels and front -drive sprocket wheels. It was powered by a ContinentalA01-403-5 gasoline engine developing 200 brake horsepower (150 kW) at 3,000 rpm, allowing a maximum road speed of 28 miles per hour (45 km/h) and a maximum -range of 140 miles (230 km). Twenty-nine rounds of main gun ammunition were carried, and only the blast shield was armored.
NEWS: SCORPION RIFLE N46

Bhai apna post phir say parhiyae. You have given a link for the scorpion rifle and the rest is all about the M56 vehicle. Some editing needs to be done. Thanks!