Jordanian defense industry

[Philip the Arab]

This thread will be fairly short but I will just be highlighting of the products Jordan has to offer.
KADDB
King Abdullah Design and Development Bureau is by far the biggest defense company in Jordan and offers a variety of products including land systems, arms & ammunition, troop equipment, electro optics and much more.
Land Systems
Al-Mared
Al-Mared is an 8x8 armored vehicle designed and developed to meet the latest defense and security requirements relied on this entry level. This armored vehicle offers a high level of protection according to STANAG 4569 KE L3 upgradeable to STANAG L4 and can be used for troops transport of up to 10 crewmen and equipment or combat as it is armed with a 30mm Turret and equipped with surveillance, monitoring and communications systems. Variants include APC, and IFV. It is based on the Tatra truck chassis.

Al-Fares
Al-Fares 6x6 is an ideal choice under the entry of special purpose armored vehicles. It is designed and developed to meet the requirements of modern warfare missions. As a versatile vehicle, it is ideal for combat, logistics, and boarder security or it can act as a command post offering a reliable solution with armoring protection up to STANAG L3/A ballistic standards for secure personnel transport of up to 11 crew members. This vehicle is also based on a Tatra truck chassis.

Al-Ghazal
Al-Ghazal is a multipurpose vehicle designed to meet the operational and tactical military requirements to accomplish missions in volatile environments. It aims to provide the highest quality of security to ensure the safety of the crew involved, developed with the efficiency and agility to act as a patrol, reconnaissance or light strike vehicle. Being based on the Land Cruiser 79, this vehicle has great spare parts availability as well as cost-effective maintenance making it an ideal choice for Special Operations.

Al-Wahsh
Al-Wahsh is a special purpose armored vehicle designed and developed to meet modern warfare mission’s requirements and to operate in all kinds of terrains, it is designed for troop’s transportation along with their tactical gear.
Features include:

• KADDB hull design on TATRA chassis .
• Capable to accommodate up to 10 crewmen.
• STANAG 4569 KE L1 protection level.
• Advanced Independent suspension system Capable to accommodate up to 10 crewmen.
• STANAG 4569 KE L2 protection level.
• Advanced Independent suspension system.
• Equipped with surveillance system.

There is also version called the Al-Wahsh 105mm which is a howitzer gun integrated on Al - Wahsh 4x4 wheeled vehicle, it was designed to suit artillery requirements (shoot and scoot) since it needs minimal efforts to reduce the readiness time.

MAP II
MAP II is a heavy tracked vehicle platform, converted by KADDB based on the platform of Centurion MBT new hull is designed of built with addition of two main crew doors in the front and back of the vehicle. It fulfills multi-purpose roles in the support of mechanized armored units based on their needs. It may be used as a personnel carrier, ammunition carrier, ambulance and command of control vehicle. MAP II provides full protection against medium caliber KE ammunition for the 13 crew members on board. It can be equipped with a Browning M2 .50 cal, a 7.62 machine gun, and 3 RPG-32 launchers.

Desert Iris
The Desert Iris is an all-terrain all-wheel drive, light weight, utility vehicle, designed, developed, and manufactured by KADDB based on newly designed space frame chassis to meet the Jordan Armed Forces specific requirements for a multi-mission, agile, light patrol vehicle.

Light Utility Vehicle
The purpose was to build a multi-purpose light utility vehicle with modular chassis in order to unify Spare parts, keep maintenance as low as possible and reduce vehicles base platforms in JAF. The variants shall include: Mobile clinic, workshop Vehicle, Command & control, Ammunition Carrier, Fridge, troops carrier and roll cage.

Temsah
Temsah tracked, heavy, Infantry Combat Vehicle ( ICV ), was designed, developed and manufactured by KADDB in cooperation with Mechanology Design Bureau ( MDB ) of South Africa, CLS Jordan and General Dynamics of the USA based on Centurion chassis. Temsah was designed and fabricated to accommodate surplus of Centurion major components to provide a mission-capable, multi- configured, heavily-protected ICV that can operate alongside the latest generation MBTs, the vehicle could be used also as an APC, tracked ambulance and command post.

AL-Dawsar
KADDB designed & built a new variation of the mechanized troops’ platforms by converting an obsolete main battle tank (Tariq MBT) into a heavy infantry combat vehicle utilizing the main chassis & driveline. components (Power pack, final drive, road wheels, rollers, idlers & tracks).

Light Weight Turret
The project aims to design & build a light weight compact turret system with medium caliber cannon as a main weapon to be adaptive for installation on medium wheeled & tracked vehicles currently available in service with JAF or being developed in KADDB for future.
Primary armament MK 44 30 / 40 Bushmaster cannon
Secondary armament M240 MG.
Counter Measure Smoke grenade launcher.
Sensor Suite Thermal, day camera, laser range finder, laser pointer
Turret Control system Electric traverse & elevation drive system.
Basket Unmanned Turret
Protection level Skin armour satisfies STANAG I protection level.

Smart Systems

Mini UGV
The mini unmanned ground vehicle (MINI-UGV) is an observation and surveillance remote-controlled mini-robot, which was designed to operate in urban environment.
This is product is ready for industrialization.
FEATURES

• Complete system with remotely controlled capability
• Designed for observation and surveillance missions
• 4x2 wheel drive mini-robot with an optional rubber track
• Capable of upside down operations
• Equipped with a colored front and back cameras
• Equipped with Infrared (IR) front camera
• Ruggedized structure
• Effective for all terrains
• Rapid deployment

Mini UAS
The mini unmanned aerial system (MINI UAS) is a compact and lightweight small autonomous aerial system. The UAS is portable and hand launched. Each system consists of 2 Unmanned Aircraft Vehicles (UAV) with a payload camera and a Ground Control Station. Its modular design enables the user to swap between different payloads such as day or infrared sensors modules that are rapidly deployed. This system is designed to fulfill tactical and surveillance requirements.
FEATURES

• Complete system consists of two UAVs with payload, downlink and ground control station.
• Light weight and portable system.
• Specifically designed for surveillance missions.
• Efficient range and endurance
• Rigid ground station for rough operation environments
• Simple to operate and rapidly deployed

SPECIFICATIONS
Weight (kg) < 8
Wing Span (m) 3.1
Length (m) 1.32
Endurance (min) 120
Operational Range (km) 15
Speed (km/h) 45 - 130

Quad Kornet(AT-14)
Special launching platform designed to fire control four Kornet E ATGMs using one sight to increase the anti-armour fire power of medium and heavy platforms used by the armored troops.

Applications

• Anti-armored.
• Anti-bunkers.

TECHNICAL SPECIFICATIONS

• Four Kornet missiles ready to fire
• Equipped with day camera (AGER thermal sight is optionally available).
• 360XN rotation angles in azimuth.
• Elevation range is between - 10 degrees to +30 degrees
• Approx. system weight 300 kg (fully loaded).
  

Arms and Ammunition

60mm Mortar
A short range 60mm mortar has been developed, designed, manufactured, and tested by KADDB. The product includes the bipod and base plate.


FEATURES

1. All gear are completely enclosed and protected in dust- tight housings.
2. The 60mm mortar is a light, simple and portable weapon system, capable of producing large volume of fire quickly and accurately, on any given target within its range.
3. The mortar is designed to be employed terrain on every type of terrain and in all kinds of weather conditions.
4. Low cost of manufacturing, and price to the customer compared to the similar product.

SPECIFICATIONS
Caliber (mm) 60
Max. range (m) 2600
Min. range (m) 150
Elevation 45º - 80º
Traverse (mils in total) 110
Number of charges, (max. pressure 450 bar) 3
Total weight (Kg) 14.9
Barrel weight (with breach) (Kg) 4.9
Bipod weight (with metal belt) (Kg) 5.5
Base plate weight (Kg) 4.5
Rate of fire (rounds/min) 30
No. of crews 2
120mm mortar directing system
20MM MORTAR FIRE DIRECTING SYSTEM PROJECT (MFDS) is an effective system for controlling the artillery fire targets, fire adjustment, sending data, and ballistic calculations; it meets the needs of the artillery corps through improvement the target acquisition, and ballistic calculations. MFDS save time and efforts, secure and fast data sending, it meets almost all the needs of land warfare by applying the concepts of artillery training through imposing all kinds of firing condition.

MFDS consist of two units (2 laptops):
A) The Position Unit: serves as the “brain” of the system. It receives the command fire from the Observer by radio as a data and do the following:

• Setup working unit data.
• Determine firing data from initial data and the adjustments.
• Determine the amount and type of ammunition to used, number of guns to be fired, number of rounds in fire of effect, priority, whether surprise fire is possible.
• Checking the location relative to allied forces, fire support coordinating measures, and zones of responsibility.
• Registering the Target data after end of fire.

B) The observer Unit: It sends the fire request from the Observer to the commander by radio as a data and does the following:

• Enter observer location.
• Determine the observer grids using (GPS) system.
• Locate targets.
• Enter target lists.
• Enter known points list.
• Enter safety zones list.
• Implement some survey.
• Sending and receiving messages.

The above two units will be connected with wireless radio system (VHF military radio system).

MFDS system is based on the artillery mathematical calculations and observation methods, so all the results are accurate and reliable in conjunction with ballistics of artillery fundamentals.

Menus are completely user friendly and with Arabic interface.

Quad RPG-32 "Nashab"
PROJECT DESCRIPTION
Quad Nash-shab is a special launching platform designed & built to host four Nashshab rockets (RPG32) with salvo firing capability of two rockets successively to effectively engage of destroy vehicles prototype by E&A and active system.

SYSTEM APPLICATIONS

1. The main application is anti-armour applications; especially the MBTs protected by single Explosive Reactive Armour (ERA) package and active defensive aid suits (i.e. Arena).
2. The system can also destroy armored targets equipped with double-ERA, OR Hard Kill system by firing two rockets simultaneously.
3. The anti-material applications; such as confined buildings & shelters (Thermobaric warheads).
4. The close range anti-personal applications utilizing the installed 7.62mm MG.
5. Surveillance & distance measuring.

FEATURES

1. the operator controls the system through the control unit; a Joystick and a ruggedized touchscreen.
2. The system has the ability to switch between two camera modes; one attached to the main sight, the other is a day camera used for surveillance and aiming the machine gun.
3. The firing mechanism is controlled via a Firing panel based on a Complex Programmable Logic Devices (CPLD)
4. Can be installed on a vehicle with 0.5 ton payload. This introduces new unprecedented anti-armour lethality for this category of vehicle with quite cheap solution rocket systems.
5. The system is installed on a customized structure which allows for 360? traverse & from -7? to + 27? elevation.

SPECIFICATIONS
Nash-shab 4 Nash-shab rockets ready to fire
M240 MG 400 ready rounds
Optronics Day camera with optical zoom with dynamic reticle of laser pointer.
Crew 1
Physical dimensions (cm) 130x130x130
Total weight (Kg) Approximately 250

RPG-32
The weapon has the ability to defeat modern heavy-armored tanks and soft-skinned vehicles as well as fortifications and bunkers. On 30th May 013, His Majesty King Abdullah II inaugurated the production facility of RPG-32 “Nash-Shab”.

RPG-32 “Nash-Shab” system consists of the following

1. 6G40 – Launcher.
2. PG-32V - Anti Tank Tandem Grenade.
3. TBG-32V - Thermobaric Grenade.
4. 1P81 - Standard optical day sight.
5. GS-2R - Day Sight with Laser Range Finder.
6. NV/A-1 – Night Vision Sight.
7. JR-SIM-32 – Training Simulator.
8. PUI-32 –Training Equipment (Sub-caliber Training round IRG-32V and Launching Tube UPI-32).

RPG-32 “Nash-Shab” Features

• Extended range in its short-range category.
• Efficient and cost effective with immunity against Jamming
• Safety due to self-destruction mechanism.
• Multi-use Compact Launcher.
• Two kinds of day sights available:
  • Standard day sight (1P81)
  • Day sight with Laser Range Finder (GS-2R).
• Night Vision sight available.
• Easy for use, with minimum training effort.
• High lethality with both Tandem and Thermobaric Grenades.
• Can be fired from semi-confined places restricted in volume.
• Training Equipment available (Training Rounds and Training Simulator).

RPG-32 “Nash-Shab” SPECIFICATIONS
Caliber 105 mm
Weight Weight 11.5 kg
Length 1200 mm
Velocity 140 m/s
Recoil Force 1 Kgf
Effective Range (Anti-Tank/Tandem) up to 500 m
Effective Range (Thermobaric/Area Target) 700m
Penetration
ERA > 650 mm
Reinforced Concrete 1500 mm
Bricks 2000 mm
Operating temperature -40 to +50 C°
Type of Sights

• 1P81 – Standard Day Sight.
• GS-2R - Day Sight with Laser Range Finder.
• NV/A-1 – Night Sight.

Type of Grenades

• PG-32V – Anti Tank Grenade.
• TBG-32V – Thermobaric Grenade.
• IRG-32V – Training Round.

Jadara Terminator
The Jadara Terminator is an ATGM developed by a Jordanian company called Jadara. It is the first ATGM indigenously developed in the Arab world.
Missile Parameter
► Missile Caliber .................................................. 107 mm
► Maximum Range of Fire ...................................... 2500 m
► Guidance System .......... Semi-Automatic by Laser Beam
► Flight time at a range of 2500 m .... Not more than 15 sec.
► Operational life .................................................. 10 years
► Operational Temperature ............. (from - 40 to + 60) °C


Missile Warhead
► Terminator Anti-Tank Guided Missile T-AT ...............
.............................................. Hollow Charge, Tandem
► Terminator High-Explosive Fragmentation
Guided Missile T-HE ......................................................
.................................... High - Explosive Fragmentation



Armour Power Penetration
► T-AT Hollow Charge,
after ERA ................................ Not less than 500 mm
► T-HE High Explosive
Fragmentation ........................... Not less than 50 mm



Weight
► Terminator Anti-Tank Guided Missile T-AT
in container ......................................................... 16 Kg
► Terminator High-Explosive Fragmentation
Guided Missile T-HE in Container ...................... 15.5 Kg
► Terminator Launcher T-L - 1 ................................... 5.4 Kg
► Terminator Guidance Sight T-GS - 1 ..................... 7.2 Kg
► Terminator Tripod T-T - 1 ...................................... 6.3 Kg



Dimensions
► Length of Missiles in Container,
for both types .............................................. 1180 mm

Electronics and Electro-Optics

Cell Phone and JPS jammer
The GPS jamming device broadcasts a noisy RF signal in the frequency range reserved for GPS receivers that interferes with the GPS received signal, which results losing the received GPS Information.

GPS jamming device blocks all satellite by transmitting a high power signal at the same frequencies of the GPS.

A GPS jammer prevents a tracking device in the vehicle from determining its location and speed, Law enforcement and military can deploy GPS frequency jamming.

* READY FOR MASS PRODUCTION

Fleet Management System
Fleet Management System from KADDB has been designed for companies and organizations that have fleet of vehicles or rely on transportation in their business. The system provides tracking, monitoring and management of vehicles at the aim of minimizing expenditures and maximizing efficiency of the resources.

FEATURES

1. Locates vehicles automatically in real-time at the fleet management Center.
2. Displays on One click: vehicles ID, type, location, time, date, status, heading and speed.
3. Supports Google maps and other digital maps.
4. Creates many shapes of Geofences.
5. Data storage and history playback.
6. Displays alerts and warnings such as over speed, weak GPS and GSM signals, low battery, tampering and traffic rules violations.
7. Fits any type or model of vehicles.
8. Generates automatic trip reports.
9. Supports Arabic and English.

DEVICE SPECIFICATIONS

1. Supports GPS, GLONASS and Galileo Satellite signals.
2. Quad-band 850/900/1800/1900 MHz.
3. Supports SMS.
4. GPS Data: Vehicle’s ID, Latitudes, Longitudes, Speed, GPS Time and GPS Signal.
5. Accuracy within 3 meters.
6. 99 Channels GPS Receiver.
7. Receiver Sensitivity: better than (-161) dbm.
8. Power Supply: (10 - 30) Volts.
9. Uses serial port.
10. Over the air configuration.
11. IP ,TCP/UDP.
12. Dimensions 65x65x15 mm.
13. Weight 76 g

Vehicular Intercom Sytstem
Vehicular Intercom system is the main peripheral unit among the combat crew and the tactical radios inside the AFV in the battlefield.

Intercom system from KADDB has been designed to provide clear voice intercommunication among the crew inside military vehicles and their access to the radio equipment within the noisy environment.

The system is composed of: main amplifier unit, commander’s junction box, 3 crew junction boxes, cable assembly, power filter and Crewman Vehicle Communication CVC Helmets or Headsets.

Troop Equipment

Helmets
KADDB manufactures a variety of helmets that are much too many for me to do so I will list 1.
PASGT Helmet
• Bullet Protection: 9 mm FMJ@426 m/s
• Fragmentation Protection = V50 > 600m/s (17 gr. fragment)
• Gross Weight: 1.250 kg
• Shell Weight: 0.995 kg
• Size: Medium (5558- cm), large (5862- cm)
• Colour: Black, olive green, UN blue, tan, camouflage and dark blue
• Optional Extras: Removable visor, communication devices, camouflage cover and NV (Night Vision)
• Used by ground military forces and units

Body Armor- I will do a 2 products since it will take me a long time to get them all.


Plate Carrier
• Flexible, high quality mesh structure, with webbing and water repellent 1000 denier nylon cordura fabric, allows more ventilation and comfort
• Release pull provides ability for rapid removal
• Plate pocket measures 300 mm Height x 250 mm Width x 20mm Depth
• Size: Free size (adjustable)
• Colours: black, tan and camouflage
• Weight: 610 g

Ceramic Ballistic Plate
• Plate constructed according to NIJ Standard 0101.04 and available in 2 performance levels; III and IV
• CBP/3/L, allows NIJ level III protection, designed to stop the 7.62 x 51 NATO ball L2A2 at 874 MPS, and weighs 2.650 kg
• CBP/4/L, allows NIJ level IV protection, which is designed to stop the 7.62 x 63 mm M2 AP round at 878 MPS, and weighs 3.250 kg
• High performance ceramic plates incorporating “CERAMID” Armour Technology
• Fits the complete range of First Armour jackets and vests which positively impact cost reduction Standard size 250 mm X 300 mm

Meals-ready-to-eat
ARM is a food-solutions provider for the defense sector. It manufactures high-quality, convenient Meals Ready-to-Eat (MRE) based on a retort pouch system and provides food catering services to military camps. It is a partnership with Brahim Overseas Ventures, an affiliate of Dewina Holdings, a Malaysian food specialist company. ARM prides itself on its flexibility, bringing a wide range of custom-designed meals that meet its clients› nutritional needs and cater to their culinary preferences as well.








Arab Ready Meals
ARM MREs were designed to succeed out-dated C-Rations (Canned Rations), and utilise state-of-the-art food preparation and storage technology, including sophisticated sterilization techniques.
The technology allows various advantages over C-Rations. Unlike C-Rations, ARM MREs undergo a relatively cool thermal process due to better heat penetration, which arises from a thinner profile. This hugely decreases the possibility of overcooking, and preserves the flavour, texture and condition of the meal. All meals are free of artificial preservatives and monosodium glutamate (MSG).




ADVANTAGES
• MREs formats are easier to handle, and are soft
• MREs are lighter and less bulky than C-Rations, allowing more efficient stockpiling and easier transportation
• MRE containers do not rust nor dent, unlike C-Ration containers
• A thinner profile enables the MRE to be heated faster, and easy-tear packaging allows packets to be opened quickly by hand




DESCRIPTION AND DIMENSIONS
• Individual dishes packed in 4ply, reinforced, nylon-laminated pouches
• Durable, able to withstand ration deployment by airdrop
• Requires no cooking, only reheating
• Pouches weigh from 140 g to 1 kg
• Sizes range from 13 cm x 16 cm to 20 cm x 30 cm







ARM MRE KEY CONSIDERATIONS
• Producing a variety of nutritional packs for military, commercial and other segments, such as humanitarian causes
• Wide range of products to meet nutritional requirements
• Diverse base locations distribute workload; geographical spread improves delivery times and aids against interruption of production
• Shelf-life and packaging integrity
• Flexibility to encourage savings and aid-contingency planning




OFFERED VARIATIONS
• Single Meal Pack Ration: a complete meal consisting of a main meal, dessert, beverage and miscellaneous ancillary
• 24hour Individual Ration Packs: meant to satisfy for 24hours, consisting of two meals, one breakfast item and miscellaneous ancillary
• Ancillary: sugar, coffee, tea, cleaning tissues, scouring pad, waterproof matches, biscuits (customisable with optional equipment)




MRE
24hour Individual Ration Packs
meant to satisfy for 24hours, consisting of two meals, one breakfast item and miscellaneous ancillary.

• Ancillary: sugar, coffee, tea, cleaning tissues, scouring pad, waterproof matches, biscuits (customisable with optional equipment)

As you can see from the above Jordan has developed a fairly robust defense industry in a relatively short span of 20 years. If you have any suggestions or things to say about this thread feel free to comment.

 

[Philip the Arab]

 

[Hamza913]

This thread will be fairly short but I will just be highlighting of the products Jordan has to offer.
KADDB
King Abdullah Design and Development Bureau is by far the biggest defense company in Jordan and offers a variety of products including land systems, arms & ammunition, troop equipment, electro optics and much more.
Land Systems
Al-Mared
Al-Mared is an 8x8 armored vehicle designed and developed to meet the latest defense and security requirements relied on this entry level. This armored vehicle offers a high level of protection according to STANAG 4569 KE L3 upgradeable to STANAG L4 and can be used for troops transport of up to 10 crewmen and equipment or combat as it is armed with a 30mm Turret and equipped with surveillance, monitoring and communications systems. Variants include APC, and IFV. It is based on the Tatra truck chassis.

Al-Fares
Al-Fares 6x6 is an ideal choice under the entry of special purpose armored vehicles. It is designed and developed to meet the requirements of modern warfare missions. As a versatile vehicle, it is ideal for combat, logistics, and boarder security or it can act as a command post offering a reliable solution with armoring protection up to STANAG L3/A ballistic standards for secure personnel transport of up to 11 crew members. This vehicle is also based on a Tatra truck chassis.

Al-Ghazal
Al-Ghazal is a multipurpose vehicle designed to meet the operational and tactical military requirements to accomplish missions in volatile environments. It aims to provide the highest quality of security to ensure the safety of the crew involved, developed with the efficiency and agility to act as a patrol, reconnaissance or light strike vehicle. Being based on the Land Cruiser 79, this vehicle has great spare parts availability as well as cost-effective maintenance making it an ideal choice for Special Operations.
View attachment 543818
Al-Wahsh
Al-Wahsh is a special purpose armored vehicle designed and developed to meet modern warfare mission’s requirements and to operate in all kinds of terrains, it is designed for troop’s transportation along with their tactical gear.
Features include:

• KADDB hull design on TATRA chassis .
• Capable to accommodate up to 10 crewmen.
• STANAG 4569 KE L1 protection level.
• Advanced Independent suspension system Capable to accommodate up to 10 crewmen.
• STANAG 4569 KE L2 protection level.
• Advanced Independent suspension system.
• Equipped with surveillance system.

There is also version called the Al-Wahsh 105mm which is a howitzer gun integrated on Al - Wahsh 4x4 wheeled vehicle, it was designed to suit artillery requirements (shoot and scoot) since it needs minimal efforts to reduce the readiness time.

MAP II
MAP II is a heavy tracked vehicle platform, converted by KADDB based on the platform of Centurion MBT new hull is designed of built with addition of two main crew doors in the front and back of the vehicle. It fulfills multi-purpose roles in the support of mechanized armored units based on their needs. It may be used as a personnel carrier, ammunition carrier, ambulance and command of control vehicle. MAP II provides full protection against medium caliber KE ammunition for the 13 crew members on board. It can be equipped with a Browning M2 .50 cal, a 7.62 machine gun, and 3 RPG-32 launchers.

Desert Iris
The Desert Iris is an all-terrain all-wheel drive, light weight, utility vehicle, designed, developed, and manufactured by KADDB based on newly designed space frame chassis to meet the Jordan Armed Forces specific requirements for a multi-mission, agile, light patrol vehicle.

Light Utility Vehicle
The purpose was to build a multi-purpose light utility vehicle with modular chassis in order to unify Spare parts, keep maintenance as low as possible and reduce vehicles base platforms in JAF. The variants shall include: Mobile clinic, workshop Vehicle, Command & control, Ammunition Carrier, Fridge, troops carrier and roll cage.

Temsah
Temsah tracked, heavy, Infantry Combat Vehicle ( ICV ), was designed, developed and manufactured by KADDB in cooperation with Mechanology Design Bureau ( MDB ) of South Africa, CLS Jordan and General Dynamics of the USA based on Centurion chassis. Temsah was designed and fabricated to accommodate surplus of Centurion major components to provide a mission-capable, multi- configured, heavily-protected ICV that can operate alongside the latest generation MBTs, the vehicle could be used also as an APC, tracked ambulance and command post.

AL-Dawsar
KADDB designed & built a new variation of the mechanized troops’ platforms by converting an obsolete main battle tank (Tariq MBT) into a heavy infantry combat vehicle utilizing the main chassis & driveline. components (Power pack, final drive, road wheels, rollers, idlers & tracks).

Light Weight Turret
The project aims to design & build a light weight compact turret system with medium caliber cannon as a main weapon to be adaptive for installation on medium wheeled & tracked vehicles currently available in service with JAF or being developed in KADDB for future.
Primary armament MK 44 30 / 40 Bushmaster cannon
Secondary armament M240 MG.
Counter Measure Smoke grenade launcher.
Sensor Suite Thermal, day camera, laser range finder, laser pointer
Turret Control system Electric traverse & elevation drive system.
Basket Unmanned Turret
Protection level Skin armour satisfies STANAG I protection level.

Smart Systems

Mini UGV
The mini unmanned ground vehicle (MINI-UGV) is an observation and surveillance remote-controlled mini-robot, which was designed to operate in urban environment.
This is product is ready for industrialization.
FEATURES

• Complete system with remotely controlled capability
• Designed for observation and surveillance missions
• 4x2 wheel drive mini-robot with an optional rubber track
• Capable of upside down operations
• Equipped with a colored front and back cameras
• Equipped with Infrared (IR) front camera
• Ruggedized structure
• Effective for all terrains
• Rapid deployment

Mini UAS
The mini unmanned aerial system (MINI UAS) is a compact and lightweight small autonomous aerial system. The UAS is portable and hand launched. Each system consists of 2 Unmanned Aircraft Vehicles (UAV) with a payload camera and a Ground Control Station. Its modular design enables the user to swap between different payloads such as day or infrared sensors modules that are rapidly deployed. This system is designed to fulfill tactical and surveillance requirements.
FEATURES

• Complete system consists of two UAVs with payload, downlink and ground control station.
• Light weight and portable system.
• Specifically designed for surveillance missions.
• Efficient range and endurance
• Rigid ground station for rough operation environments
• Simple to operate and rapidly deployed

SPECIFICATIONS
Weight (kg) < 8
Wing Span (m) 3.1
Length (m) 1.32
Endurance (min) 120
Operational Range (km) 15
Speed (km/h) 45 - 130

Quad Kornet(AT-14)
Special launching platform designed to fire control four Kornet E ATGMs using one sight to increase the anti-armour fire power of medium and heavy platforms used by the armored troops.

Applications

• Anti-armored.
• Anti-bunkers.

TECHNICAL SPECIFICATIONS

• Four Kornet missiles ready to fire
• Equipped with day camera (AGER thermal sight is optionally available).
• 360XN rotation angles in azimuth.
• Elevation range is between - 10 degrees to +30 degrees
• Approx. system weight 300 kg (fully loaded).
  

Arms and Ammunition

60mm Mortar
A short range 60mm mortar has been developed, designed, manufactured, and tested by KADDB. The product includes the bipod and base plate.


FEATURES

1. All gear are completely enclosed and protected in dust- tight housings.
2. The 60mm mortar is a light, simple and portable weapon system, capable of producing large volume of fire quickly and accurately, on any given target within its range.
3. The mortar is designed to be employed terrain on every type of terrain and in all kinds of weather conditions.
4. Low cost of manufacturing, and price to the customer compared to the similar product.

SPECIFICATIONS
Caliber (mm) 60
Max. range (m) 2600
Min. range (m) 150
Elevation 45º - 80º
Traverse (mils in total) 110
Number of charges, (max. pressure 450 bar) 3
Total weight (Kg) 14.9
Barrel weight (with breach) (Kg) 4.9
Bipod weight (with metal belt) (Kg) 5.5
Base plate weight (Kg) 4.5
Rate of fire (rounds/min) 30
No. of crews 2
120mm mortar directing system
20MM MORTAR FIRE DIRECTING SYSTEM PROJECT (MFDS) is an effective system for controlling the artillery fire targets, fire adjustment, sending data, and ballistic calculations; it meets the needs of the artillery corps through improvement the target acquisition, and ballistic calculations. MFDS save time and efforts, secure and fast data sending, it meets almost all the needs of land warfare by applying the concepts of artillery training through imposing all kinds of firing condition.

MFDS consist of two units (2 laptops):
A) The Position Unit: serves as the “brain” of the system. It receives the command fire from the Observer by radio as a data and do the following:

• Setup working unit data.
• Determine firing data from initial data and the adjustments.
• Determine the amount and type of ammunition to used, number of guns to be fired, number of rounds in fire of effect, priority, whether surprise fire is possible.
• Checking the location relative to allied forces, fire support coordinating measures, and zones of responsibility.
• Registering the Target data after end of fire.

B) The observer Unit: It sends the fire request from the Observer to the commander by radio as a data and does the following:

• Enter observer location.
• Determine the observer grids using (GPS) system.
• Locate targets.
• Enter target lists.
• Enter known points list.
• Enter safety zones list.
• Implement some survey.
• Sending and receiving messages.

The above two units will be connected with wireless radio system (VHF military radio system).

MFDS system is based on the artillery mathematical calculations and observation methods, so all the results are accurate and reliable in conjunction with ballistics of artillery fundamentals.

Menus are completely user friendly and with Arabic interface.

Quad RPG-32 "Nashab"
PROJECT DESCRIPTION
Quad Nash-shab is a special launching platform designed & built to host four Nashshab rockets (RPG32) with salvo firing capability of two rockets successively to effectively engage of destroy vehicles prototype by E&A and active system.

SYSTEM APPLICATIONS

1. The main application is anti-armour applications; especially the MBTs protected by single Explosive Reactive Armour (ERA) package and active defensive aid suits (i.e. Arena).
2. The system can also destroy armored targets equipped with double-ERA, OR Hard Kill system by firing two rockets simultaneously.
3. The anti-material applications; such as confined buildings & shelters (Thermobaric warheads).
4. The close range anti-personal applications utilizing the installed 7.62mm MG.
5. Surveillance & distance measuring.

FEATURES

1. the operator controls the system through the control unit; a Joystick and a ruggedized touchscreen.
2. The system has the ability to switch between two camera modes; one attached to the main sight, the other is a day camera used for surveillance and aiming the machine gun.
3. The firing mechanism is controlled via a Firing panel based on a Complex Programmable Logic Devices (CPLD)
4. Can be installed on a vehicle with 0.5 ton payload. This introduces new unprecedented anti-armour lethality for this category of vehicle with quite cheap solution rocket systems.
5. The system is installed on a customized structure which allows for 360? traverse & from -7? to + 27? elevation.

SPECIFICATIONS
Nash-shab 4 Nash-shab rockets ready to fire
M240 MG 400 ready rounds
Optronics Day camera with optical zoom with dynamic reticle of laser pointer.
Crew 1
Physical dimensions (cm) 130x130x130
Total weight (Kg) Approximately 250

RPG-32
The weapon has the ability to defeat modern heavy-armored tanks and soft-skinned vehicles as well as fortifications and bunkers. On 30th May 013, His Majesty King Abdullah II inaugurated the production facility of RPG-32 “Nash-Shab”.

RPG-32 “Nash-Shab” system consists of the following

1. 6G40 – Launcher.
2. PG-32V - Anti Tank Tandem Grenade.
3. TBG-32V - Thermobaric Grenade.
4. 1P81 - Standard optical day sight.
5. GS-2R - Day Sight with Laser Range Finder.
6. NV/A-1 – Night Vision Sight.
7. JR-SIM-32 – Training Simulator.
8. PUI-32 –Training Equipment (Sub-caliber Training round IRG-32V and Launching Tube UPI-32).

RPG-32 “Nash-Shab” Features

• Extended range in its short-range category.
• Efficient and cost effective with immunity against Jamming
• Safety due to self-destruction mechanism.
• Multi-use Compact Launcher.
• Two kinds of day sights available:
  • Standard day sight (1P81)
  • Day sight with Laser Range Finder (GS-2R).
• Night Vision sight available.
• Easy for use, with minimum training effort.
• High lethality with both Tandem and Thermobaric Grenades.
• Can be fired from semi-confined places restricted in volume.
• Training Equipment available (Training Rounds and Training Simulator).

RPG-32 “Nash-Shab” SPECIFICATIONS
Caliber 105 mm
Weight Weight 11.5 kg
Length 1200 mm
Velocity 140 m/s
Recoil Force 1 Kgf
Effective Range (Anti-Tank/Tandem) up to 500 m
Effective Range (Thermobaric/Area Target) 700m
Penetration
ERA > 650 mm
Reinforced Concrete 1500 mm
Bricks 2000 mm
Operating temperature -40 to +50 C°
Type of Sights

• 1P81 – Standard Day Sight.
• GS-2R - Day Sight with Laser Range Finder.
• NV/A-1 – Night Sight.

Type of Grenades

• PG-32V – Anti Tank Grenade.
• TBG-32V – Thermobaric Grenade.
• IRG-32V – Training Round.

Jadara Terminator
The Jadara Terminator is an ATGM developed by a Jordanian company called Jadara. It is the first ATGM indigenously developed in the Arab world.
Missile Parameter
► Missile Caliber .................................................. 107 mm
► Maximum Range of Fire ...................................... 2500 m
► Guidance System .......... Semi-Automatic by Laser Beam
► Flight time at a range of 2500 m .... Not more than 15 sec.
► Operational life .................................................. 10 years
► Operational Temperature ............. (from - 40 to + 60) °C


Missile Warhead
► Terminator Anti-Tank Guided Missile T-AT ...............
.............................................. Hollow Charge, Tandem
► Terminator High-Explosive Fragmentation
Guided Missile T-HE ......................................................
.................................... High - Explosive Fragmentation



Armour Power Penetration
► T-AT Hollow Charge,
after ERA ................................ Not less than 500 mm
► T-HE High Explosive
Fragmentation ........................... Not less than 50 mm



Weight
► Terminator Anti-Tank Guided Missile T-AT
in container ......................................................... 16 Kg
► Terminator High-Explosive Fragmentation
Guided Missile T-HE in Container ...................... 15.5 Kg
► Terminator Launcher T-L - 1 ................................... 5.4 Kg
► Terminator Guidance Sight T-GS - 1 ..................... 7.2 Kg
► Terminator Tripod T-T - 1 ...................................... 6.3 Kg



Dimensions
► Length of Missiles in Container,
for both types .............................................. 1180 mm

Electronics and Electro-Optics

Cell Phone and JPS jammer
The GPS jamming device broadcasts a noisy RF signal in the frequency range reserved for GPS receivers that interferes with the GPS received signal, which results losing the received GPS Information.

GPS jamming device blocks all satellite by transmitting a high power signal at the same frequencies of the GPS.

A GPS jammer prevents a tracking device in the vehicle from determining its location and speed, Law enforcement and military can deploy GPS frequency jamming.

* READY FOR MASS PRODUCTION

Fleet Management System
Fleet Management System from KADDB has been designed for companies and organizations that have fleet of vehicles or rely on transportation in their business. The system provides tracking, monitoring and management of vehicles at the aim of minimizing expenditures and maximizing efficiency of the resources.

FEATURES

1. Locates vehicles automatically in real-time at the fleet management Center.
2. Displays on One click: vehicles ID, type, location, time, date, status, heading and speed.
3. Supports Google maps and other digital maps.
4. Creates many shapes of Geofences.
5. Data storage and history playback.
6. Displays alerts and warnings such as over speed, weak GPS and GSM signals, low battery, tampering and traffic rules violations.
7. Fits any type or model of vehicles.
8. Generates automatic trip reports.
9. Supports Arabic and English.

DEVICE SPECIFICATIONS

1. Supports GPS, GLONASS and Galileo Satellite signals.
2. Quad-band 850/900/1800/1900 MHz.
3. Supports SMS.
4. GPS Data: Vehicle’s ID, Latitudes, Longitudes, Speed, GPS Time and GPS Signal.
5. Accuracy within 3 meters.
6. 99 Channels GPS Receiver.
7. Receiver Sensitivity: better than (-161) dbm.
8. Power Supply: (10 - 30) Volts.
9. Uses serial port.
10. Over the air configuration.
11. IP ,TCP/UDP.
12. Dimensions 65x65x15 mm.
13. Weight 76 g

Vehicular Intercom Sytstem
Vehicular Intercom system is the main peripheral unit among the combat crew and the tactical radios inside the AFV in the battlefield.

Intercom system from KADDB has been designed to provide clear voice intercommunication among the crew inside military vehicles and their access to the radio equipment within the noisy environment.

The system is composed of: main amplifier unit, commander’s junction box, 3 crew junction boxes, cable assembly, power filter and Crewman Vehicle Communication CVC Helmets or Headsets.
View attachment 543828
Troop Equipment

Helmets
KADDB manufactures a variety of helmets that are much too many for me to do so I will list 1.
PASGT Helmet
• Bullet Protection: 9 mm FMJ@426 m/s
• Fragmentation Protection = V50 > 600m/s (17 gr. fragment)
• Gross Weight: 1.250 kg
• Shell Weight: 0.995 kg
• Size: Medium (5558- cm), large (5862- cm)
• Colour: Black, olive green, UN blue, tan, camouflage and dark blue
• Optional Extras: Removable visor, communication devices, camouflage cover and NV (Night Vision)
• Used by ground military forces and units

Body Armor- I will do a 2 products since it will take me a long time to get them all.


Plate Carrier
• Flexible, high quality mesh structure, with webbing and water repellent 1000 denier nylon cordura fabric, allows more ventilation and comfort
• Release pull provides ability for rapid removal
• Plate pocket measures 300 mm Height x 250 mm Width x 20mm Depth
• Size: Free size (adjustable)
• Colours: black, tan and camouflage
• Weight: 610 g

Ceramic Ballistic Plate
• Plate constructed according to NIJ Standard 0101.04 and available in 2 performance levels; III and IV
• CBP/3/L, allows NIJ level III protection, designed to stop the 7.62 x 51 NATO ball L2A2 at 874 MPS, and weighs 2.650 kg
• CBP/4/L, allows NIJ level IV protection, which is designed to stop the 7.62 x 63 mm M2 AP round at 878 MPS, and weighs 3.250 kg
• High performance ceramic plates incorporating “CERAMID” Armour Technology
• Fits the complete range of First Armour jackets and vests which positively impact cost reduction Standard size 250 mm X 300 mm

Meals-ready-to-eat
ARM is a food-solutions provider for the defense sector. It manufactures high-quality, convenient Meals Ready-to-Eat (MRE) based on a retort pouch system and provides food catering services to military camps. It is a partnership with Brahim Overseas Ventures, an affiliate of Dewina Holdings, a Malaysian food specialist company. ARM prides itself on its flexibility, bringing a wide range of custom-designed meals that meet its clients› nutritional needs and cater to their culinary preferences as well.








Arab Ready Meals
ARM MREs were designed to succeed out-dated C-Rations (Canned Rations), and utilise state-of-the-art food preparation and storage technology, including sophisticated sterilization techniques.
The technology allows various advantages over C-Rations. Unlike C-Rations, ARM MREs undergo a relatively cool thermal process due to better heat penetration, which arises from a thinner profile. This hugely decreases the possibility of overcooking, and preserves the flavour, texture and condition of the meal. All meals are free of artificial preservatives and monosodium glutamate (MSG).




ADVANTAGES
• MREs formats are easier to handle, and are soft
• MREs are lighter and less bulky than C-Rations, allowing more efficient stockpiling and easier transportation
• MRE containers do not rust nor dent, unlike C-Ration containers
• A thinner profile enables the MRE to be heated faster, and easy-tear packaging allows packets to be opened quickly by hand




DESCRIPTION AND DIMENSIONS
• Individual dishes packed in 4ply, reinforced, nylon-laminated pouches
• Durable, able to withstand ration deployment by airdrop
• Requires no cooking, only reheating
• Pouches weigh from 140 g to 1 kg
• Sizes range from 13 cm x 16 cm to 20 cm x 30 cm







ARM MRE KEY CONSIDERATIONS
• Producing a variety of nutritional packs for military, commercial and other segments, such as humanitarian causes
• Wide range of products to meet nutritional requirements
• Diverse base locations distribute workload; geographical spread improves delivery times and aids against interruption of production
• Shelf-life and packaging integrity
• Flexibility to encourage savings and aid-contingency planning




OFFERED VARIATIONS
• Single Meal Pack Ration: a complete meal consisting of a main meal, dessert, beverage and miscellaneous ancillary
• 24hour Individual Ration Packs: meant to satisfy for 24hours, consisting of two meals, one breakfast item and miscellaneous ancillary
• Ancillary: sugar, coffee, tea, cleaning tissues, scouring pad, waterproof matches, biscuits (customisable with optional equipment)




MRE
24hour Individual Ration Packs
meant to satisfy for 24hours, consisting of two meals, one breakfast item and miscellaneous ancillary.

• Ancillary: sugar, coffee, tea, cleaning tissues, scouring pad, waterproof matches, biscuits (customisable with optional equipment)

As you can see from the above Jordan has developed a fairly robust defense industry in a relatively short span of 20 years. If you have any suggestions or things to say about this thread feel free to comment.

I'm very impressed! How are the other Arab countries doing in comparison?

 

[Mithridates]

beautiful indeed. i really like the temsah but regarding the al-dawsar and MAP II, it is a drawback that the door is placed in front of vehicle specially for an APC. but except of that, all the other things seem cool and reliable. well done

 

[Philip the Arab]

I'm very impressed! How are the other Arab countries doing in comparison?

Other Arab countries are moving along at a slower pace with the exception being the Gulf. You should check out the thread Made In KSA and Made in the UAE for more information.

@Mithridates You can check out this video for more about a single company called Jadara under KADDB that makes the RPG-32, the Terminator, and a sniper rifle. Its kind of long but has good animation and music. I agree it is dangerous to have a front facing exit and entry port its still a good use of obsolete tanks.

 

[Hamza913]

You should check out the thread Made In KSA and Made in the UAE for more information.

Didn't the UAE assist in making the block 70 Vipers?

 

[Philip the Arab]

Didn't the UAE assist in making the block 70 Vipers?

I think they just payed for it. I think they get royalties for it but its still the most advanced F-16 to my knowledge. I can show you a vehicle the UAE just released.
Al-Wahash

B-250 Bader CAS aircraft based on the Tucano design and from the same designer

10-15 years ago I doubt they could have gone this far.

 

[Hamza913]

I think they just payed for it. I think they get royalties for it but its still the most advanced F-16 to my knowledge. I can show you a vehicle the UAE just released.
Al-Wahash

B-250 Bader CAS aircraft based on the Tucano design and from the same designer
View attachment 543836
10-15 years ago I doubt they could have gone this far.

I would love to see the Muslim world unite, I'm sure if we pulled all our resources together again we could see a resurrection of the early Islamic empire.

 

[Philip the Arab]

The Soldier System

The Soldier System is a compact electronic unit located within integrated harness and holder, it consists of the following modules :

• • High-Sensitivity GPS.
  • Digital Compass.
  • Barometric sensor ( Optional ).
  • Short Range Data Link.
  • Main System Battery.

The system provides basic SA and navigation information to the single soldier and also info message relaying to the higher level.

Download Brochure (PDF file)

http://www.jels-tech.com/images/pdf/digital_soldier_and_universal_commander_units.pdf

This could be useful to Pakistan considering how many of you guys say Pakistan's troops are ill equipped for the modern battlefield.

• • Battlefield Management
  • Electronic Warfare
• Login
• News
• Contact Us

PYTHON eye

The LCTS-2 is a compact, lightweight, uncooled thermal sight for portable application. LCTS-2 features a 8-12 μm single Field of View uncooled thermal imager and a high resolution OLED display and viewer, all housed in a ruggedized and sealed housing.
LCTS-2 , when mounted on small arms or individual weapons, will enable the user to detect, acquire and engage targets during day and night.
http://www.jels-tech.com/images/pdf/python_eye.pdf

Tiger Eyes

Tiger Eyes Pan-Tilt, Multi-Sensor day and night security cameras let you see intruders and other threats to your facility’s security clearly in total darkness and in bad weather. The precision pan/tilt mechanism gives operators accurate pointing control while providing fully programmable scan patterns. Fully enabled for control and operation over digital and serial networks, high-resolution 640 × 480 format, providing up to sixteen times the image clarity and longer threat detection range performance than lower resolution thermal cameras. Multi-sensor configurations also include a day/night zoom color CCD camera on the same pan/tilt package..

http://www.jels-tech.com/images/pdf/tiger_eyes.pdf






RUM-100-HH

RUM-100-HH is a compact and rugged man-portable day/night personal sight system. It combines the functionality of a thermal biocular with a daytime sight system multiplexed over the same display.
RUM-100-HH can be used as a stand-alone hand-held biocular or mounted on tripod .
It is very much suitable for all surveillance missions.
The system offers high image quality and is extremely user friendly...
Download Brochure (PDF file)

http://www.jels-tech.com/images/pdf/rum_100_hh.pdf







VIP Protection Jammer

The threat from Radio Controlled Improvised Explosive Devices (RCIED) has increased because of the wide availability of commercial radio-control equipment that can easily be adapted as IED triggers.
The use of RCIED's allow terrorists to place large amounts of explosives against hard or soft targets with a high degree of mobility – in effect turning these RCIED's into precision weapons that cause mass casualties and physical destruction. RCIED attacks require less coordination, planning, expertise,
material, and money than the more spectacular type of terrorist methods, such as aircraft hijackings or employment of weapons of mass destruction, yet still can achieve the mass casualty objective.
As the deployment of RCIED's by terrorists and criminals increases, civil and military security services are required not only to meet the current threat but also to predict terrorist capability advances in order to provide effective countermeasures. JELS designs Field proven Communication Jamming devices for the purpose of controlling Remote Controlled Improvised Explosive Devices. All the Jamming systems are carefully custom designed for every customer depending on their threat perceptions.
http://www.jels-tech.com/images/pdf/vip_ protection_jammer.pdf


Portable GSM, 3G, 4G Jamming System

This solution is a cost effective high performance GSM / 3G / 4G jammer for law enforcement operation. It can generate a band barrage jamming signal to effectively shut down any mobile device within its radiated power zone.

• Frequency range 925-965MHz, 1800-1890 MHz and 2100-2185MHz.
  
• Generate barrage jamming signal bandwidth.
• Jamming modes include spot, sweep and barrage jamming.
• DDS Jamming Signal.
• Output Power Monitoring and control.
• Built-in spectrum monitoring capabilities.
• Equipped with high gain directive and Omni Antennas.

Wave Storm

WaveStorm is a cost effective high performance V/UHF smart jammer. Beside its capabilities to search, monitor the spectrum and listen to the intercepted signals, it can generate a spot or band barrage jamming signal to effectively shutdown any communication system within its radiated power zone. Although the conventional communications systems can be knocked down using an interfering signal, the new systems that uses spread spectrum techniques are more immune to these kinds of Jamming. WaveStorm uses a an implementation of digital radio frequency memory (DRFM) technique to defeat these systems.

• Frequency range 50MHz to 2850MHz.
  
• Can generate instantaneous spot barrage jamming signal bandwidth
  from 10KHz up to 8MHz (optional up to 32MHz).
• Jamming modes include spot, sweep and barrage jamming.
• DRFM Jamming for complex transmission.
• Jamming interfering signal can be selected from digitally generated noise interfering signal, digitally off-line mathematically prepared interfering signal or digitally recorded one.
• Capability to select forbidden jamming spectrum regions (friendly frequencies) when using sweep or bands jamming.
• Less than 1msec jamming response time from the moment of receiving control command.
• Sufficient jammer RF output power enough to drive any external high power RF amplifier.
• Built-in spectrum searching and monitoring capabilities.
• TCP/IP based application programming Interface.
• Easy to use Windows based graphical user interface (GUI).

http://www.jels-tech.com/images/pdf/wave_storm.pdf

Signal Sniper

We provide the basic receiving unit which contains the signal processing core necessary to implement any frequency sliding SIGINT system. All what the client have to use is an RF frequency down converter to see, analyze and record any interested 2 GHz frequency band.

Features

• Single core compact hardware COMINT/ ELINT.
• 8 MHz instantaneous analysis bandwidth (ELINT Applications).
• Down to 250 Hz spectrum resolution (COMINT Applications).
• High speed spectrum analysis up to 40 GHz/sec @ 8 MHz band when tuning to a fixed interesting frequency.
• TCP/IP based control to allow easer coordinated operation and management.
• Easy to use Graphical user interface software.
• Basic unit bandwidth coverage is 2 GHz.
• Instantaneous 8 MHz band raw RF signals storage for subsequent off line analysis.
• Extendable due to its modular design which enables more signal analysis power by combining N units to achieve N times analysis power.
• Any custom system design can be realized easily by connecting LNA, local oscillator, mixer, filters and our processing core.
• Rich application programming interface software core.

Lynx Armed UGV
The Lynx robot is a medium tracked military robot designed for military tasks ranging from reconnaissance to combat. It is equipped with the following set of sensors: front drive camera, back drive camera, PTZ camera, GPS and digital compass. Smart guidance functions are provided to support the following modes: squad architecture, predefined mission and long range remote guidance. Different weapons can be placed on the Lynx such as the M16 rifle, 7.62 MG's and RPG's

http://www.jels-tech.com/images/pdf/lynx_c.pdf

Modernization of Strela-10 system for Jordan.
www.jels-tech.com/images/pdf/short_range_air_defense.pdf

 

[Philip the Arab]

The Desert Iris is an all-terrain all-wheel drive, light weight, utility vehicle, designed, developed, and
manufactured by KADDB based on newly designed space frame chassis to meet the Jordan Armed Forces specific requirements for a multi-mission, agile, light patrol vehicle.

FEATURES

• The design is based on a space frame chassis
• Low profile fast attack platform
• Efficient independent suspension
• Light, compact, and air-transportable
• Can be armed by a variety of weapons based on the mission profile

SPECIFICATIONS
Total Length (m) 4.1
Total width (m) 1.8
Height (m) 1.7
Gross Vehicle Weight (kg) 1650
Engine 100 hp, 2.8 liter diesel engine
Transmission Manual, 5 speeds
Maximum range (km) 600
Maximum Road Speed (km/hr) 120
Gradient 60%
Side slope 40%
Ground Clearance (m) 0.25
Number of Crew 3+1
Armament 7.62 mm, 12.7 mm MG, 106 mm gun, and ATGMs

Reliability, Durability and Safety was the major factors considered by King Abdullah II Design and development Bureau KADDB during the design and development of Al-Washaq Light 4x4 Tactical ATV (Utility type) in order to be the best choice on its class.

The vehicle is powered by small diesel engine to give vehicle the high torque generated, where the front and rear independent suspension system provide unbeatable comfort drive at all type of terrain.

The vehicle can be modified to suit accept the following:

• Quad NASHAB Launcher
• 106mm recoilless gun
• Firefighting system

SPECIFICATIONS
Performance
Maximum Speed (km/h) 60
Gradability 60%
Approach Angel 56°
Departure angel 60°
Turning Radius (m) 8.75
Engine
Type 1028cc 20.0KW/ 27.2HP, Liquid-cooled with 3 in line cylinders
Transmission Continuously variable transmission (belt-drive) 3 speeds (high, low and reverse), Selectable shaft 4x4 or 4x2, with front and rear differential control
Fuel Tank Capacity 42L
Suspension 4 Wheels Double Wishbone Independent Suspension
Steering Rack and Pinion
Breaks Dual piston hydraulic disc for front and hydraulic disc for rear brake.
Tires and Rims 6ply 26x9-R14
Chassis & Safety Rigid tubular steel, with 2 passengers roll cage protection, tubular steel pumpers, and lifting rings.
Seats and Harness Suspended seats with head rest and 5 points seat belts.
Weight & Measurements
Length, Width, Height 345cm, 176cm188cm.
Wheel Base 200cm.
Ground Clearance 24cm.
Payload 250kg.
Dry Weight 850kg.
Towing Load 750kg.
Range (off-road and fully loaded) 320km.
Electrical & Instruments 12V, 75Am with 65Am Alternator, Multi-Function Digital Meter, Standard Driving, Tail/Brake lights, and map light, and electrical winch.
Optional 4 passengers roll cage protection, Blackout / IR Lighting, Tire Balls® branded Flat Proof Tech.

Al-Monjed is a converted recovery vehicle based on the chassis of the decommissioned American battle tank M60A1.

The hydraulically-driven main drum winch has a maximum single line pull of 400 KN (41 tons) at 13 m/min.

The hydraulically-operated crane is capable of lifting up to (6.5 tons) power pack. The hydraulics are self-contained and powered by the power take-off from the main engine as main system or by the installed APU as an auxiliary system, this enables the vehicle to change its own power Pack.

Monjed will tow vehicles of up to 60 tons in weight at speeds of up to 30 km/h.

To upgrade & enhance the lethality of the MRAP platform (FPI Cougar CAT2) recently joined JAF with the following capabilities:

1. Integration of the M61 20mm Vulcan system
2. Mounting a 7.62 mm machine gun on MRAP for light self defense scenarios.
3. Developing & integrating a networked situation awareness and surveillance system consisted of six thermal cameras, and one central observer system consisted of long range day and night surveillance cameras mounted on electromechanical mast with a continuous 360⁰ pan & tilt system. The surveillance and situation awareness cameras are linked through a network
4. Integrating thermal camera with gunner screen for Vulcan target acquisition and aiming.

4x4 Special purpose high mobility armored tactical vehicle designed and developed to meet the new security agencies requirements and to protect troops along with their tactical gear during operations.

FEATURES

• KADDB hull design on TATRA chassis .
• Capable to accommodate up to 10 crewmen.
• STANAG 4569 KE L2 protection level.
• Advanced Independent suspension system.
• Equipped with surveillance system.

TECHNICAL SPECIFICATIONS
crew 2+8
Maximum Road Speed 110 Km/h
Suspension Independent suspension
Transmission Automatic 6 speeds

Al Jawad Armored Vehicle is an armored internal security vehicle (ISV), comprising of an armored body based on a heavy duty chassis with 6.7L Diesel Turbo Engine with 300 HP, that offers automotive performance, payload and operational capabilities. Al-Jawad designed with battle aero dynamic and more flexibility to perform duty inside the cities and narrow roads with easy maneuvering, the designers kept the ability of Al-Jawad as troop carrier to carry (2+8) fully equipped troopers including the Driver & the Commander. Al-Jawad offers high levels of ballistic and fragmentation protection to the occupants as standard with CEN B6 level of protection.

This high mobility tactical highly protected and multi-missions vehicle has some extra upgrades, which employed it for many internal security roles such as:

• Armored personnel carrier.
• Antiriot & Antiterrorisme Vehicle.
• Armament Carrier.
• Internal security Vehicle.
• Logistics Vehicle.
• Armored Ambulance.
• Mobile Command & Control Centre.
• A platform for a wide variety of other uses including conforming to multiple fleet strategies of the armed forces

TECHNICAL SPECIFICATIONS
crew 2+8
Maximum Road Speed 130 Km/h
Suspension Heavy duty leaf spring
Transmission Automatic 6 speeds



Command and Control Vehicles are designed to provide the information required for operational advantage, acting as an automated tactical command post for mobile operation security as well as military missions, allowing support, command and control functions during an operation.

Numerous commercial platforms are used for building Command and Control Vehicles. Ford, Mercedes and Volkswagen trucks and vans are among them.

With the potential for complete on-the-move operations capability, the main roles for the Command and Control Vehicle are:

1. To support internal security units
2. To supervise and communicate
3. To command and manage missions
4. To control UAVs

The vehicle is equipped with an air conditioning system, electrical generator and high-technology communication systems equipped with monitoring cameras that collect and broadcast data.

All equipment is fitted and distributed inside the vehicle to best utilise the space available, taking high internal mobility into consideration, as well as allowing movement in-between work stations.

Command and Control Vehicles are equipped with the latest technological equipment and fitted to a standard of excellence that customers have come to expect, such as:

• Wide LCD screens
• Custom layout for storage
• Custom layout for meeting facilities and waiting areas
• Workstations and tables
• Kitchen facilities
• Generators with 12V, 24V and 220V power options
• Telescopic mast systems
• Phones, intercoms and communication equipment
• CCTV systems

PARAMEDICS AMBULANCE
The Paramedics’ Ambulance is supplied with the standard equipment needed to perform emergency care, including first aid kits. The vehicle is designed to function as part of the emergency response service, handling situations as fire and rescue and providing paramedical assistance and emergency evacuation.

The Paramedic Ambulance provides life-saving support on emergency sites, including the transfer of patients to medical facilities. The latest medical technology is available for patient assessment and emergency care while transportation is in progress.

This vehicle can be built on different base vehicles, including the Mercedes-Benz Sprinter, the Ford E250-, Ford E350-, Chevrolet Express and GMC Savana.

PATIENT TRANSPORT AMBULANCE
The Patient Transport Ambulance is designed to transport patients not in need of emergency medical care between places of treatment; a wheelchair lift is available to assist with patient entry into and exit from the ambulance.

These vehicles supply a basic level of medical support, including an oxygen emergency system, but are not normally built to provide life support. However, they are fitted with flashing lights and sirens to facilitate movement through traffic.

EMERGENCY AMBULANCES
Emergency ambulance vehicles, the most common type of ambulances, are tasked with responding to incidents, providing transportation to and from places of treatment and patient care.

Moreover, this vehicle can be used to bring medical care into the community, providing care to patients suffering from minor illness or injury, but unable to attend a medical facility.

The emergency ambulance can be based on the chassis of Mercedes-Benz Sprinter, Ford E250-, Ford E350-, Chevrolet Express, or GMC Savana.

ARMOURED AMBULANCES
Armoured Ambulances are based on civilian designs. Mainly used for emergency cases such as terrorist attacks, the armoured ambulance is a heavy-duty vehicle containing all medical equipment required for medical assistance, tasked with providing immediate medical care in the aftermath of any serious incident.

GENERAL FEATURES (ALL AMBULANCES)

1. All equipment used in the ambulances is medically licensed
2. All medical equipment used in these vehicles is high-quality and distributed by local and international agents
3. The customer has control over the internal design
4. AC/DC converters and electrical control units are installed in the vehicle
5. Medical equipment is anti-bacterial

All-Terrain Ambulances are based on 4x4 vehicles, such as the Toyota Land Cruiser 78 and are designed to respond to off-road situations.

The base vehicle can be modified to carry emergency equipment, including first aid kits and is intended for various tasks, including the provision of aid for those in areas inaccessible by a normal city ambulance. Consequently, they are ideal ambulances for large events, such as sporting competitions.

Like all ambulances, they are fitted with flashing lights and sirens to facilitate their movement through traffic.

The VIP Ambulance was created to act as an escort for a VIP convoy and is therefore designed against exceptionally high standards. It is provided with hightechnology equipment, including the latest emergency medical systems and first aid kits. These ambulances are designed to work as part of the emergency quick response service, such as those pertaining to fire and rescue, paramedical services and emergency evacuation.

The VIP Ambulance is capable of responding to serious incidents and makes use of the latest medical technology to provide life- saving support to a patient as transportation to a medical facility is in progress.

The VIP Ambulance is based on the Cadillac Escalade chassis; it allows high automotive performance and its mobility takes aerodynamic design into consideration.

The interior design efficiently utilises the space available for maximum comfort and room, for both passengers and patients.

Stallion is a 4x4 LAV designed to have several operational & tactical missions, whether as a tactical reconnaissance vehicle or as a light armored vehicle within peace keeping missions or even as an internal security & border patrol vehicle.

The vehicle can be built on various types of chassis, including:

• Vans
• Buses
• Trucks
• Semi-Trailers
• Containers

The Mobile Clinic provides disease screening, treatment and operation. It is provided with necessary equipment and machinery and capable of providing medical care to multiple patients simultaneously.

The Clinic is customised to customer requirements. A reception area, waiting area, doctor room, diagnosis area, storage area and restroom form the Clinic interior.

Mobile Clinic Vehicles and healthcare delivery services capable of transportation include:

• Eye Clinic
• Mammography
• Dental Clinic
• X-Ray, CI and MRI
• Laboratory
• Blood Bank
• ICU
• Paediatric Clinic
• Hospitals (A complex of clinics)
• Rest Rooms, Sanitary, Kitchens, Bed Rooms... Etc
• And Other types of Mobile Medical Clinics

FEATURES

• Fully-equipped and functional autonomous mobile clinics
• All equipment used in vehicles is medically-licensed
• Interior vehicle design customisable to customer requirements
• AC/DC convertor and electrical control units installed in vehicle
• Optional solar panels replace AC/DC converters
• Air-conditioned
• Expertly designed
• Guaranteed operational efficiency in all climates
• Optimised, ergonomic interior designs and minimal external dimensions
• Capable of additional medical technology integration
• Complete standalone solutions, utilising onboard power supply
• After-sales support, maintenance, repair, logistics and spare parts

ASELSAN Middle East Day Sights are two fields of view, reticule reflected and low-weighted rifle sights that are designed for dual usage with Infantry Guns and Sniper Guns. This modern design combines reflex collimator and telescopic sight in one single body. In this manner, it is possible to shoot the target at the first try and reduce bullet spending.

These two-sided, reticule reflected and low-weighted weapon sights may be used both as a reflex collimator via its reddot reticule and 1x (or 1.5x) magnification combination and telescopic sight via its ballistic or mil-dot reticule and 4x (or 6x) magnification combination. The red-dot and 1x combination provides soldiers higher success at faster first shoots in inhabited place battles while the ballistic reticule and 4x magnification combination increases shoot success in longer ranges. In order to use these functions, soldiers only need to switch the magnification handle which is placed between the sight and mounting adapter and able to be adjusted easily. This alteration is provided by the optic lens unit action into optical axis.

Moreover, newly designed mounting adapters provide soldiers faster bore-sighting and easier attachment to gun.

GENERAL CHARACTERISTICS

• High Resolution
• Two Field of View Options
• Reticule Reflection
• Possibility to Convert Reflex Collimator
• Range up to 400 m (for 4x)
• Range up to 600 m (for 6x)
• Red-dot and Mil-dot Functions
• Compliant to Military Specifications
• Faster bore-sighting and easier adaptation to guns
• Dual Use Capability with A100 Night Vision Monocular (1x only)
• Adaptable to Piccatiny Rail According to Mil-Std1913-

STANDARD EQUIPMENT

• Accessories
• Transporting Case
• Storage Case
• Cleaning Kit
• CR 31/ N 3V Battery

TECHNICAL CHARACTERISTICS
1x4-x 1.5x6-x
Magnification (max) 4x 6x
Field of View (min) 6.5º x 26º 4º x 16º
Weight (with mounting adapter) 650 g 790 g
Eye Relief 70 mm 70 mm
Pupil 8 mm 7 mm
Battery Type CR 31/ N 3V CR 31/ N 3V
Battery Life > 200 hrs > 200 hrs

The A100 Model Night Vision Monocular offers high resolution, image-intensifier night vision in a compact, lightweight design, with a single tube, single eyepiece configuration. The A100 Monocular Goggle relies on the independent use of each eye: one is equipped with a night vision device; the other is left uncovered.

The A100 Monocular Goggle permits quick, efficient adaptation to ambient light after the goggle is removed, preventing the temporary night blindness a standard dual eye goggle creates. Additionally, the A100 can be coupled with diurnal optics to be used at night time as a rifle scope. The A100 Monocular also displays a wider perceived field of view (FOV) of °40 on the equipped eye.

The device can be operated either by using a single AA battery or a rechargeable battery. Easy access to the battery compartment makes battery replacement straightforward. Its conveniently-located and easy-to-operate On/Off and IR switches catalyse ease-of-use and textured focus, coupled with dioptre adjustment rings, provide hassle-free operation.

GENERAL CHARACTERISTICS

• 1x Magnification
• Adjustable Dioptre
• Built-In IR Illuminator
• Single AA Battery Operated
• Easy Battery Replacement
• Handheld or Weapon Mounted Operation
• Helmet and NBC Mask Compatible
• Compact, Light Weight and Rugged
• High Gain, Brighter Image, Low-Light Sensitivity
• Increased Facemask Comfort and Stability

OPTIONAL ITEMS

• Daylight Training Filter / Sacrificial Filter

STANDARD ACCESSORIES

• Facemask Assembly
• Shipping/Storage Case
• Soft Carrying Case
• Eyecup
• Lens Cap, Objective
• Battery, AA Alkaline (2 ea.)
• Lens-Cleaning Kit
• Demist Shield
• Operator’s Manual

TECHNICAL SPECIFICATIONS
Performance
Magnification 1x
Field of View °40
Focus Range 25 cm to infinity
Eye Relief 25 mm
Weight (without battery) Less than 350 g
Environment
Operating Temperature °51-C to °55+C
Storage Temperature °51-C to °71+C
Immersion 1 m for 30 minutes
Power Source
One AA Alkaline 1.5V cell Or One AA 1.8V Lithium Cell

The A340 High Performance 4X Individual Night Vision Weapon Sight is designed to increase the aiming capability of modern infantry through image-intensified night vision technology. It is a new, high-performance weapons sight operating on only one “AA” size battery; it is water-resistant, compact, lightweight, and user-friendly. Making use of 4X sight, it provides a highresolution, intensified image for effective night sighting and aiming.

The A340 Weapon Sight includes a splash-proof lens cover with a large neutral density filter for daylight training and accurate daylight weapon zeroing.

GENERAL CHARACTERISTICS

• Single Switch Operation
• Reticule Brightness Adjustment
• Protection to Sudden Light Flares
• Compact, Light Weight and Rugged Design
• More Gain, Brighter Image
• Low Light Sensitivity

STANDARD EQUIPMENT

• Operator’s Manual
• Lens Cleaning Kit
• Daylight Training Filter
• Soft Carrying Case
• Shipping/Storage Case
• Shuttered Eyecup
• Torque Limited Piccatiny Adapter

TECHNICAL CHARACTERISTICS
Performance
Magnification 4x
Field of View °10
Objective F-Number 1.5
Minimum Focus Distance 20 m
Eye Relief 25 mm
Dioptre 2+/ 6-
Windage / Elevation Adjustment 41/ MRAD/click
Reticule * Duplex or Chevron
Weight ** 1150 g
Integration Torque Limited Piccatiny Adapter (MIL-STD1913-)
Environment
Operating Temperature °51-C to °51+C
Storage Temperature °65-C to °65+C
Immersion 1 m for 30 minutes
Power Source
One AA Battery (Alkaline or Lithium-ion)
Battery Life 50 h (min.)

The A360 High Performance 6X Individual Night Vision Weapon Sight is designed to increase the aiming capability of modern infantry via image-intensified night vision technology.

It is a new, high-performance weapons sight operating on only one “AA” size battery; it is water-resistant, lightweight, compact, and user-friendly. It provides a high-resolution, intensified image for effective night sighting and aiming through the use of 6X sight.

The A360 Weapon Sight includes a splash-proof lens cover with a large neutral density filter for daylight training and accurate daylight weapon zeroing.

GENERAL CHARACTERISTICS

• Single Switch Operation
• Reticule Brightness Adjustment
• Protection to Sudden Light Flares
• Compact, Light Weight and Rugged Design
• More Gain, Brighter Image
• Low Light Sensitivity

STANDARD EQUIPMENT

• Operator’s Manual
• Lens Cleaning Kit
• Daylight Training Filter
• Soft Carrying Case
• Shipping/Storage Case
• Shuttered Eyecup
• Torque Limited Piccatiny Adapter

TECHNICAL CHARACTERISTICS
Performance
Magnification 6x
Field of View °6.5
Objective F-Number 2
Minimum Focus Distance 30 m
Eye Relief 25 mm
Dioptre 2+/ 6-
Windage / Elevation Adjustment 61/ MRAD/click
Reticule * Duplex or Chevron
Weight ** 1400 g
Integration Torque Limited Piccatiny Adapter (MIL-STD1913-)
Environment
Operating Temperature °51-C to °51+C
Storage Temperature °55-C to °65+C
Immersion 1 m for 30 minutes
Power Source
One AA Battery (Alkaline or Lithium-ion)
Battery Life 50 h (min.)

The ASELSAN Middle East Armoured Vehicle Thermal Sighting System (ATS10-) enhances the operational capabilities of armoured vehicles for carrier reconnaissance, fire support, and patrol missions, in all weather and battlefield conditions. A compact structure means the ATS10- can be integrated onto any type of armoured vehicle.

The ATS10- is a panoramic weapon sighting system. Its modular structure includes a ballistic armour-protected thermal sight unit, operator control unit, displays, video receiver and transmitter, integration kit, cable kit, and system electronics.

The ATS10- provides range estimation through a stadiametric rangefinder. It offers two reticules for 14.5 mm and 7.62 mm heavy guns, mounted on the armoured vehicle, and allows the loading of new reticules on the external port.

High-range optical magnification equates to long-distance targets being viewed in detail. The ATS10- allows one-button control and easily comprehensible menu structure which makes it a user friendly device with simple operating principles.

GENERAL CHARACTERISTICS

• Programmable reticules
• Accessing Functions with Menu
• Automatic Image Optimization
• Polarity Change
• Gain and Level Adjustment
• Stadiametric Rangefinder
• Reticule on/off
• High Resolution LCD Display
• Compliant to Military Specifications

SYSTEM UNITS

• Ballistic Armour
• Thermal Sight Unit
• Operator Control Unit
• LCD Displays
• Video Receiver and Transmitter Unit
• Integration Kit
• Cable Kit
• Power Regulator Unit

TECHNICAL CHARACTERISTICS
Frequency Band Long Wave Infrared (128- μm)
Detector Microblometer
Field of View

• (Wide) °9 (H) x °6.75 (V)

• (Narrow) °3 (H) x °2.25 (V)

Focus Range 20 m to infinity
Input Voltage 2412- VDC
Video Output CCIR

Re-designing the traditional Jordanian dagger to a compatible tactical knife with military specifications, JAWS tactical knife is made from carbon steel and comes with G-10 Grips.

SPECIFICATIONS
Material Carbon Steel (Optional Damascus steel)
Length 335+1 mm
Thickness 4.8+0.1 mm
Hardness 50-58 HRC

AWS Tactical Pistol (JTP-9)- STANDARD
JTP- 9 is a standard 9X19 mm size pistol accurately designed to be a high-quality, high- precision firearm to meet Special Operations and Law Enforcement agencies mission requirements. JTP-9 is compliant with international military and law enforcement standards guideline for gun testing. It features polymer frame with standard MIL-STD-1913 picatinny rails compatible with elite tactical flash lights and aiming devices, in addition to a standard size barrel for accuracy and military application standards.

SPECIFICATIONS
Barrel Cold Hammer Forged
Magazine Capacity 17
Magazine Type Double Stack
Grips Serrated
Overall Length 210 mm

AWS Tactical Pistol (JTP-9C)- COMPACT
For concealing advantages, the overall length of the pistol has been compressed to create a compact version JTP- 9C, It is accurately designed with a polymer lower to be a high-quality, high- precision firearm to meet Special Operations and Law Enforcement agencies mission requirements. JTP-9C is compliant with international military and law enforcement standards guideline for gun testing. It features a standard MIL-STD-1913 picatinny rails compatible with elite tactical flash lights and aiming devices.

SPECIFICATIONS
Barrel Cold Hammer Forged
Magazine Capacity 17
Magazine Type Double Stack
Grips Serrated
Overall Length 190 mm

The self-propelled 105mm gun is developed utilizing the 105mm towed howitzer (M102). The gun system is mounted on a 4x4 wheeled vehicle to enhance gun mobility it is intended for use by infantry, special operations forces and as artillery support for border security forces.

FEATURES

• Inventively designed and integrated self-propelled howitzer on a wheeled platform.
• Outstanding performance in delivering firepower.
• “Shoot & Scoot “capability by decreasing time needed to be in and out of action and by easily transporting the gun between defense posts.
• Efficient and accurate electrohydraulic gun laying mechanism with manual back up.
• Quick response capability with onboard crew and 36 rounds of ready ammunition.
• Effective local protection armed with 7.62 mm machine gun or 12.7 mm machine gun.

TECHNICAL SPECIFICATIONS
Caliber (mm) 105
Total length OTM (On The Move) (LxWxH) (m) 7.5x3x3.7
G.V.W (kg) 11.2
Elevation -5° (-85 mils) to 75° (1 275 mils)
Traverse (without moving the vehicle) 45° (800mils) Right & 45°(800mils) Left
Maximum firing range (m) 11,500
Rate of fire 10 rounds/min (first 3 min.) 3 rounds/ min (average)
Onboard ammunition 36 shells
Maximum Travel Speed (OTM) (KM/h) 125
Fuel capacity (Ltr) 200
Number of Crew (with driver) 3 + 1

Scorpion/Scimitar Light Tank Upgrade and Modernization KADDB offers a complete modernization and upgrade of these two versatile vehicles which significantly improves their technical and operational performance and guarantees long term sustainability.

TECHNICAL SPECIFICATION
Scorpion Vehicle

• Engine with 194 hp
• Dieselization kit
• TN15 semi-automatic transmission with 7 speeds forward and 7 speeds reverse
• L23A1 main gun 76 mm caliber
• 7.62 mm co-axial machine gun

Scimitar Vehicle

• Engine with 194 hp
• Dieselization kit
• TN15 semi-automatic transmission with 7 speeds forward and 7 speeds reverse
• 2A72 main gun 30 mm caliber
• 7.62 mm commander’s machine gun
• 2 ammo feed belts with 350 round capacity

Pictures of the 60mm mortar by KADDB

 

[Philip the Arab]

Sniper Rifle J-9

Technical Data



► Caliber .......................... (.338 lapua Magnum)
► Action ............................................... Bolt Action
► Feed System ............... 5-10 round detachable
box magazine
► Weight .................................................... 6.2 kg
► Length ................................................ 1.297 m
► Barrel Length ....................................... 700 mm
► Velocity ....................................... Up to 925 m/s
► Range .................................................. 1500 m
















Note: Technical data and pictures are given for information
purpose, modifications are reserved, and values

QUAD-2

Technical Data
► Mode of operation .......................................... Day / Night
► Correction of side wind
and moving targets ............................................. Automatic
► Correction of altitude .......................................... Automatic
► The maximum distance
of the Remote Control Unit ...................................... 300 m
► Weight ......................................................................... 90 Kg
► Power Supply ................................ Vehicle source power



The range of rotational angle of slewing device
● In Azimuth .................................................................. ± 85˚
● In Elevation ..................................................... + 30˚ to - 5˚







Note: Technical data and pictures are given for information
purpose, modifications are reserved, and values
are not contractual.

JADARA QUAD TERMINATOR

Specifications
► Missile caliber ................................................... 107 mm
► Maximum Range of Fire ................................... 2500 m
► Guidance Sys tem ...... Semi-Automatic by Laser Beam
► Terminator Anti-Tank Guided Missile (T-AT)
Warhead ................................. Hollow Charge, Tandem
► Terminator High-Explosive Fragmentation Guided Missile
(T-HE) Warhead.............. High-Explosive Fragmentation
► Machine Gun Caliber ........................................ 7.62 mm
► The dis tance of control of the sys tem using
the Remote Control Unit (RCU), max. ................. 300 m
► Channels:
- Television Channel (Wide & Narrow FOV)
- Thermal Vision Channel
- Laser Range Finder Channel
- Laser Missile Guidance Channel
► Field of view for TV Channel:
- Wide Field of View ....................................... 20° x 15°
- Narrow Field of View ................................. 3.5° x 2.6°
► Field of view
for Thermal Imaging Channel ....................... 6.2° x 4.7°
► Detection Range of a Target “Man
in military Camouflage”............... Not less than 1500 m
► Detection Range of a Target “moving tank”
(side view) .................................. Not less than 3500 m
► Range of measured dis tances,
LRF Channel ............................... (From 50 To 3500) m
► Range of operating angles of the 2D Rotary
Platform (2DRP):
- Azimuth ............................................................... 360°
- Elevation ...................................... From -10° to +40°
► Mass of the Complex
(W/O Missiles) .......................... Not more than 230 kg
► Overall dimensions
of the Complex ..... Not more than (650х700х1500) mm
► Power Supply ....... Vehicle Network or 24V Battery Unit











Note:Technical data and pictures are given for information
purpose, modifications are reserved, and values
are not contractual.

Mass Casualty & Evacuation Vehicles
Ambulance buses or mounted on truck or trailer have been used for a number of different purposes, including mass casualty incident response, disaster response, offering on-site triage, surge capacity, testing hospital readiness, fire fighter rehabilitation, hospital evacuation, rest home evacuation, taking patients on routine journeys such as holidays for care dependent patients.

Specifications of Chassis:

• Various commercial platforms are used for building an Evacuation Ambulance, such as Toyota, Hyundai, HINO, Ford and Mercedes trucks and vans
• 4 X 2, 4 X 4, appllications are available with different sizes and horse powers

Mass casualty use:

The vehicle can be deployed to major incidents, where multiple patients are present or expected, and can be used in two main ways:

• The units can act in a stationary capacity as a casualty clearing station, field hospital or treatment centre
• alternatively, they can be used to transport multi stretcher- or wheelchair-bound patients from scene to the next definitive point of care

Mass casualty evacuations are designed from the ground up to handle the increased demands of multi-patient treatment and transportation. Mass casualty evacuations provide a large number of stretchered patients with control oxygen, a controlled climate and the electrical capacity to power essential medical equipment.

In the event of a major disaster or evacuation, mass casualty evacuation can be used to transport high volumes of non-ambulatory hospital and nursing home patients out of harm's way. Critical care transport and Advanced Life Support systems are integrated into each vehicle to accommodate the needs of patients requiring constant intensive care.

Body Structure:

• This type could be built on vans or buses or trucks.
• Sandwich panels isolated from inside are used with the proper reinforcement to be mounted on a chassis or fitted as a trailer
• A/C system for the Transport area
• Can take from (4) stretchers up to (16)
• Can be divided to many sections based on the patient case
• Central oxygen system and central ventilation system could be applied
• Storage compartment in the patient cab
• Shoreline socket supplies electricity from external electrical sources to feed patient cabinet equipment
• 2-way intercom fitted between driver and Patient Compartments
• Equipped with internal lighting system for a clearer vision during the evacuation of the wounded and sick
• Equipped with power outlets (12V) and other (220V)

The Evacuation vehicle is provided with the medical devices according to the customer's request and needs, such as:

• Oxygen System
• Stretchers & Holding Brackets with Fixation mechanism
• Suction Unit
• Emergency Intubation Kit
• Oxygen Resuscitation System
• Defibrillator
• Any monitoring or treatment equipment could be provided
  
  

AL-Tha’lab
Operational Roles:

Vehicle has been designed to fulfill the following roles:

Surveillance and Reconnaissance (SR( whilst conducting Special Role tasks, the vehicle’s primary role is to place a patrol into an area of operations where a target may be observed, and many other applications could be implemented on the vehicle.

Offensive Action (OA):

Whilst conducting OA tasks, the vehicle’s primary role is to be a highly mobile weapons platform from which the mounted support weapons may be used to their best effect (to deliver effective and precise fire into a selected target with sustained accuracy(.



General Features

· High capability suspension system

· Work under condition between (15c to 55c), and humidity 90%

· 1 spare wheel & 1 equipment cage

· Ability for air transportation

· Foldable windscreen

· Upgrade brake system







SPECIFICATIONS

weapon mounts

Front swing arm and rear race ring and swing arm

electrical generator

70 amp

crew

2 + 2

battery

Dual 12v 60 amp/hr

Driving range

up to 1500 Km

Ladder

ditch crossing ladder or assault ladders + 2 Sand channels



Optional SPECIFICATIONS

• Upgrade clutch

• Ability to convert to 24 Volt system

• Turbo charger with intercooler

• Bead lockers

• Air compressor

• Tonneau covers for driver and commander

• Heating system (Special overall to be used) only for driving & commander

• Upgraded suspension system

Track shoes

Picatinny Rail

Picatinny Rail for M60 and M60E3 Machine Guns with a weight of 370gm




MANUAL RING MOUNT (STEEL)

JordanAMCO’s heavy duty Manual Steel Ring Mount is designed to support different types of Heavy Machine Guns (HMG).


The design of the ring is engineered in a way to be easily mounted on a variety of vehicles.
Moreover, the installation can be done locally where a minimum number of tools is required.



Model: JA 5010

Bullet Resistant Guard room

Guard Booth fitted with eight vision blocks and several internal hardware options.

Can be fitted with cupola on top, that has the same protection level. The cupola has traverse of 360 deg.

Open Top Cupola

Open Top Cupola with different protection levels:

- BR6
- STANAG I
- STANAG II

Fully Closed Cupola- SNAKEHEAD MKIII-A

Completly Closed cupola fitted with 13 vision blocks, enabling the gunner to have wide surveillance angles of the perimeter around the vehicle.

Using a manual or a motorised ring mount system with an override mechanism, provides the user with a smooth 360 degrees of traverse.






Maintenance- Refurbishing M60 Cylinders

The refurbishing process starts with machine work to clean the inside of the old M60 cylinder, and to continue with planting the new sleeve inside it, in order to produce a whole new M60 cylinder.




SAMSON AND SAMARITAN

· Upgrading the recovery vehicle Samson and the ambulance vehicle Samaritan, by installing a 145 KW STEYR diesel engine with turbocharger intercooler.

· Upgrading refers to the replacement of a product with a newer version of that same product. It is most often used in computing and consumer electronics, generally meaning a replacement of hardware, software with a newer or better version, in order to bring the system up to date or to improve its characteristics. The word is also used to describe the replacement of a product with a better quality product with the aim of bringing enhancements to quality.

· Refurbishing all mechanical and electrical systems including the winch and the ambulance chamber.

A Toyota Land cruiser pickup is being modified to mount an anti-aircraft missile system (IGLA), where a steel structure designed and fitted on the rear pickup box to install IGLA launcher.

The modifications are sustainable durability, stability and targeting accuracy.

The steel structure includes three lockers used to stow missiles and equipment, protected against dust and water.

GUNNER SHIELDS

· Designed and manufactured of armored gunner shield mounted on the race ring of different vehicles.

· Providing B6 protection level with vision ports to allow a wide angle of view using bullet proof glass.

SAXON VEHICLES

· The SAXON armored personnel carrier is modified by providing six firing ports – three at each side- with ability to open and close using B7 level Armox shutters, with additional six vision blocks that could be replaced easily when needed.

· Two tipper seats are designed and manufactured to accommodate six passengers installed on each side.

· The seats are enabled to turn over in order to provide the maximum appropriate and comfortable shooting position.

· Also repairing and maintaining of this kind of vehicles including mechanical and electrical components.

 

[Philip the Arab]

Ballistic Shield

• Dimension : 50*90 Cm
  
  
• Protection Level : Level III according to NIJ 0101.08 + level III+ (7.62x39 MSC)
• Weight : APPROX 11.00 Kg
  
  
  

 

[Philip the Arab]

At SOFEX 2018, the International Special Operations Forces Exhibition and Conference, JADARA has unveiled a new remotely operated weapon station mounted on a light tactical vehicle Toyota, armed with two launchers for the Terminator medium-range anti-tank guided missile and one 7.62mm light machine gun.

The Terminator missile can be fitted with two types of warheads: AT Hollow Charge, Tandem and HE High Explosive, Fragmentation which can be used to destroy tanks, light armored vehicles, light soft skinned vehicles and field fortifications at a distance from 100 to 2,500 m.

The Terminator is a laser beam riding, semi-automatic command-to-line of sight (SACLOS) missile. It can be mounted on either a portable launcher or a carrier-based automatic launcher.