The Deterrent
SENIOR MEMBER
- Joined
- Jan 7, 2011
- Messages
- 3,168
- Reaction score
- 39
- Country
- Location
Shut up and learn to take a compliment gracefully. Drama queen.
I think you misunderstood my post. By superlative adjectives, I referred to this statement by @God Parshuram
The problem with these kind of claims (which sometimes extend to single-digit accuracy for IRBMs) is that they are exaggerated. Once-in-a-blue-moon type pin-point hit does NOT mean that the CEP of the weapon is in single digits. Even Pakistani Shaheen-I has hit a target flag once, according to @Oscar.one the most accurate missile of its kind existing anywhere in the world.
An RV without fins MUST be spin-stabilized for re-entry, making ANY kind of course-corrections till impact close to impossible. Therefore at least a 2-digit inaccuracy is induced in the system, even if the trajectory error prior to re-entry was zero. Fanboys usually don't realize the inherent complexity of guiding an RV spinning on its axis during re-entry.
Pakistan does not have the requirement or the resources to go beyond 1.4m design. As long as the required range and payload requirements are being met..... larger diameter, TVC, better interstage etc do not improve Pakistan's deterrence capabilities. You have to realize that any such COSMETIC 'upgrades' require retirement of the existing arsenal and production of new weapons in large equivalent numbers, which Pakistan has no resources for. Which reminds of the cost angle, if you see Pakistan's developments over 2 decades, you'll realize how Pakistan is keeping the costs so low.Hi
Agni 1 might not be in production but Agni 1P hasn't been revealed either- at least till now. What we are seeing here might be either Agni 1P or Agni2. But one thing is certain the modernization drive to introduce some of the technology viz the canisters etc reduce the prep time considerably and MEMS based FOGS improve the CEP tremendously-so much so that it can be used to effectively take out adversaries nuclear potential in a short span of time. Whenever i closely observe Pakistani startegic missiles, one thing that I find amusing is that they didn't they go beyond 1.4m 'space bridge' or SpaB rocket motors. It also seems as if Pakistan never really worked on the nozzles to improve the divergence losses. The truss structure tells a similar tale as well. Ababeel is a decent improvement over let's say Shaheen but it too uses the same old 1.4m SpaB. For some reason Pakistani designers can't get rid of external fins that provide stability. The pitch and yaw control is through the vanes. Designing a thrust vectoring nozzle to control the rocket throughout is much more complex than the vanes. The nozzle is actuated by very sensitive servo mechanism that not only has to control the orientation of the missile but also provide artificial stability in absence of external fins
Pakistan is making adequate advancements in the REQUIRED technologies which matter, i.e. composite motors, solid fuel, miniaturized warheads etc. In the future (considering mobility and credible second-strike requirements) the only 2 cases in which Pakistan might introduce major upgrades are for canisterization or an SLBM (need TVC & interstage for both).
Makes sense, it doesn't exactly look like a DRDO facility.It's likely to be TATA's workshop and they're just using a mock up without considerations to parts that don't matter to the launcher dimensions.
Last edited: