Iranian AMIG Products

[Destructlord]

AMMUNITION AND METALLURGY INDUSTRIES GROUP

​

Ammunition & Metallurgy Industries Group (AMIG) is the largest industrial group of Defense Industries Organization (D.I.O) which is in charge of producing a wide range of ammunition from small arms up to large caliber artillery ammunition covering both western and eastern standards. Having more than seven decades of experience in manufacturing military products, AMIG has met the requirement of domestic and international markets in supplying any type of conventional ammunition as well as all components thereto. AMIG, composing of 8 subsidiaries located in different cities of Iran is utilizing modern technology, sophisticated machineries and equipment as well as specialized personnel to manufacture qualified products in both military and non military field. This has led AMIG to achieve various certificates in ISO and other international standards. AMIG products include:Small Arms,Medium Caliber,Mortar Bombs Tank & Anti Tank,Filled Artillery and Cargo.

SMALL ARMS MILITARY CARTRIDGES

​

The Military Cartridges are intended for use in various types of hand-held or mounted weapons applied for combat or training purposes. They can be classified as: BALL intended for use in rifles, and/or machine guns against personnel and unarmored targets. TRACER intended to permit visible observation of the bullets in-flight path or trajectory and the point of impact. AP (Armor-Piercing) which is used in machine guns or rifles against personnel and light armored and unarmored targets, concrete shelters, and similar bullet-resisting targets. API (Armor-Piercing-Incendiary) having an incendiary mixture to burst into flame when impacting with the target and ignite the flammable material. APIT (Armor-Piercing-Incendiary-Tracer) the bullet which acts as combination of the features of the armor-piercing, tracing and incendiary. SPOTTER-TRACER to serve as a fire control device to verify weapon sight settings before firing 106mm weapons. BLANK which is used for simulated fire, in training maneuvers, and for saluting purposes.

SMALL ARMS LAW ENFORCEMENT CARTRIDGES

​

The cartridges required for the Law Enforcement purposes include 9mm, 0.38”, 0.32”, 0.40” and 0.45” calibers as well as 7.65 Browning. These Cartridges are intended for use with pistol, revolver, and submachine gun and are vastly used by Police and Law Enforcement Forces all over the world.

​

 

[Destructlord]

SMALL ARMS HUNTING CARTRIDGES

​

Hunting Cartridges were the first and main products provided in two types as Shotgun Shells and Rifle Cartridges. The Shot Shells consist of PVC shell containing certain quality of lead balls of various diameters and provided in 3 different gauges suitable for hunting small animals such as birds.

SMALL ARMS SPORTING CARTRIDGES

​

Sports Shooting either to flying clay targets or fixed targets are attractive entertainments having many fans all over the world by introducing two types of shot shells and one type of ball cartridge. The Sporting Shot Shells are TRAP and SKEET types used in Trap and Skeet Shooting Clubs against Flying Clay Targets and each one can be provided with different quantity of
lead balls according to the customer's request. The Sporting Ball Cartridge is 0.32 S. & W. which is intended for practicing and competitions.

​

 

[Destructlord]

SMALL ARMS INDUSTRIAL CARTRIDGES

​

The products are not devoted only to military purposes but they have been developed to meet the civil industries requirements as well. Boulder Buster Cartridge is provided to bust the boulders or rocks without using any special explosives such as dynamite and just by a cartridge and some water. Gauge 8 Cartridge is provided to blast the slag that could form in the many different types of industrial furnaces such as that of Cement Factories and Line Throwing Cartridge for throwing lines from ship-to-ship.

23 mm ANTI AIRCRAFT SHELL

​

The 23mm Anti Aircraft Shell is a well qualified cartridge designed in two types for air defense operations. One type to be fired from ZU-23 Twin Barrel cannon a Russian type air defense ground gun and the other for use with RW-6-23 gun mounted on Aircraft or Helicopter in an air to ground defense operation. The latter has a brass case while the case in the former is made out of steel.

​

 

[Destructlord]

30 mm ANTI AIRCRAFT SHELL

​

The 30mm Anti Aircraft Shell is also manufactured in various types for different purposes in air defense operations. They are used in the 2A42 cannon fixed to the BMP-2 and can be applied against lightly armored targets at ranges up to 1,500 m and also against low-flying aerial targets such as helicopters. The HEI, HEIT, APT and TP (Training Practice) for each product are the various types manufactured as well as same for Naval Forces.

35 mm ANTI AIRCRAFT SHELL

​

The 35mm Anti Aircraft Shell as the medium caliber AA ammunition is used with Oerlikon 35 mm series cannon against air targets. There are two types of HEI and HEIT produced regularly and one type of SAHEIT (Semi Armour High Explosive Incendiary with Tracer) which is under development.

​

 

[Destructlord]

60 mm MORTAR BOMB

​

The high flexibility and easy handling and the accuracy of operation are the essential points considered in providing the mortar bombs. Both HE and smoke types of 60 mm Mortar Bombs have a symmetrically streamlined steel body with a welded steel eight-fin tail unit screwed to the rear end. A primary cartridge fits into the end of the tail tube and increment charges can be clipped into the fins.

81 mm HIGH EXPLOSIVE & SMOKE

​

Both HE and smoke types of 81 mm Mortar Bombs have a symmetrically streamlined steel body with a welded steel eight-fin tail unit screwed to the rear end. A primary cartridge fits into the end of the tail tube and increment charges can be clipped into the fins.

​

 

[Destructlord]

ILLUMINATING

​

This Mortar Bomb is intended for illuminating a desired point or area and consists of a time fuze, thin-walled steel body-tube, parachute, steel tail cone and fin assemblies containing propellant increment charges, ignition cartridge and propulsion cartridge. A tail cone is inserted into the body tube and is held in position by four equally spaced shear pins. The illuminant assembly consists
of a first-fire charge and an illuminant contained in a box board case. The parachute assembly is attached to the illuminant assembly casing by a steel suspension wire.

60 mm LONG RANGE

​

DIO has improved his normal type Mortar Bombs to achieve Long Range ones of 60mm and 81mm. The improvement is not only in the range but also in their performance. With more volume of explosive material, the new types have more explosion power and respectively much better fragments and finally resulting to better performance. All these changes are achievable without any changes to the mortar Launchers.

​

 

[Destructlord]

81 mm LONG RANGE

​

DIO has improved his normal type Mortar Bombs to achieve Long Range ones of 60mm and 81mm. The improvement is not only in the range but also in their performance. With more volume of explosive material, the new types have more explosion power and respectively much better fragments and finally resulting to better performance. All these changes are achievable without any changes to the mortar Launchers.

120 mm HIGH EXPLOSIVE & SMOKE

​

Both HE and smoke types of 120 mm Mortar Bombs have the symmetrical steel body, with five gas check rings irregularly spaced around the waist. The nose is threaded for an impact fuze (AZIIIA2) and the body ends in a screwed spigot to which a steel tail unit is attached. The only difference between two types is the internal filling.

​

 

[Destructlord]

120 mm MORTAR BOMB

​

The Mortar Bomb has also a streamlined steel body with steel tail bow and alloy fins. It has five gas check grooves around the waist arranged as three and two. The bomb is assembled in two parts, the body and the tail cone and tail bow assembly, both being joined by shareable pins. In the body is the flare canister and behind it, the parachute to allow the burning flare to float to the ground.

120 mm ROCKET ASSIST DETAIL

​

This is an enhanced range Mortar Bomb to be used against light material and personnel, functioning with both fragmentation and blast effect. Once the Bomb is fired and en route to its target, the rocket motor initiates during the final few seconds of the flight, adding approximately 4 km range over conventional bombs.

​

 

[Destructlord]

100 mm ANTI TANK AMMUNITION

​

The 100 mm HEAT-T-M456 is a fixed round high explosive anti tank Ammunition intended for use against armored targets and is fired with T-55 tank . 105 mm HEAT-T-M456A1 is another fixed round product similar to 100 mm HEAT in the shape and function but in different size and armament.

105 mm ANTI TANK AMMUNITION

​

The 100 mm HEAT-T-M456 is a fixed round high explosive anti tank Ammunition intended for use against armored targets and is fired with T-55 tank . 105 mm HEAT-T-M456A1 is another fixed round product similar to 100 mm HEAT in the shape and function but in different size and armament.

​

 

[Destructlord]

105 mm HIGH EXPLOSIVE,TANK M60

​

The product is a fixed round High Explosive ammunition with the projectile secured to the brass cartridge case and is fired with M60 series tank guns. Having a muzzle velocity of 864 m/s the projectile reaches a max range of 17,000 m in the field being effective against enemy's personnel and materials by producing both fragmentation and blasts.

106 mm HE & HEAT

​

This product is provided in two types as HE & HEAT. Both can be fired with Recoilless Rifles M40 or M40A1. The base of the projectile contains the PIBD M509A1 fuze and the fin assembly. Cartridge case has a steel perforated body and contains the propellant charge and fitted at the base with a percussion primer.

​

 

[Destructlord]

125 mm HIGH EXPLOSIVE

​

The product is a fin Stabilized and separate loading ammunition which is fired with 2A46M tank gun fitted to T-72 MBT and T-80 UD. It is automatically loaded into the breech followed by a semi-combustible propellant case. Having a muzzle velocity of 850 m/s the projectile reaches a max range of 12,200m in the field being effective against enemy's personnel and materials by producing both fragmentation and blasts.

125 mm HIGH EXPLOSIVE ANTI TANK

​

This is another separate loading ammunition which is intended for use against armored targets and fired with 2A46M tank gun fitted to T-72 MBT. It is automatically loaded into the breech followed by a semi-combustible cartridge case. The projectile has a steel body encircled by two driving bands and its front carries a standoff spike inside which is a piezoelectric contact sensor connected by an internal wire to a base-mounted fuze. This ammunition can penetrate 550 mm of Rolled Homogenous Armour (RHA) at normal angle or 273 mm at an angle of 60 deg. to the normal. This type of ammunition is produced in other calibers such as 122 mm.

​

 

[Destructlord]

125 mm APFSDS

​

Among penetrator ammunition, the APFSDS ones are the most effective and efficient ammunition in armour fights. Being capable of producing various caliber, DIO introduces its 125 mm APFSDS which has 470 mm penetration in RHA plates and a max range of 3000 mtr.

105 mm HIGH EXPLOSIVE & ILLUMINATION ​

105mm Howitzer Ammunition series are semi-fixed rounds with the projectile being a free fit in the cartridge case to allow free access to the propellant increments inside the case for adjustment. The projectile is of a high-tensile steel forging with a streamlined ogive, a boat tailed base and a welded base cover and a single copper driving band.

105 mm SMOKE WP,SMOKE HC

​

105mm smoke Ammunitions are in different types due to filler materials as well as the process of smoke disposal. The one having WP smoke material is the normal type and the other with HC smoke material is base ejection type.

​

 

[Destructlord]

125 mm APFSDS

​

Among penetrator ammunition, the APFSDS ones are the most effective and efficient ammunition in armour fights. Being capable of producing various caliber, DIO introduces its 125 mm APFSDS which has 470 mm penetration in RHA plates and a max range of 3000 mtr.

105 mm HIGH EXPLOSIVE & ILLUMINATION

​

105mm Howitzer Ammunition series are semi-fixed rounds with the projectile being a free fit in the cartridge case to allow free access to the propellant increments inside the case for adjustment. The projectile is of a high-tensile steel forging with a streamlined ogive, a boat tailed base and a welded base cover and a single copper driving band.

​

 

[Destructlord]

MORE INCOMING... TOMORROW! IM VERY TIRED!

 

[Waraich]

good job!!!!!