What's new

Gun Barrel Cleaning Machines for Tank & Artillery Guns

XYON

SENIOR MEMBER
Joined
Jan 20, 2008
Messages
1,719
Reaction score
2
Country
Pakistan
Location
Pakistan
Some years ago, Pakistan Army tested a few machines in order to simplify the cumbersome manually operated Gun Barrel Cleaning Protocol. The Army currently employs a manual system whereby a team of soldiers first puts a very toxic acid into the barrel and then uses a long rod tipped with a steel brush to 'shove' to back and forth for a good period of many hours to dissolve the rust and gun powder accumulated inside the barrel. This manual process is highly hazardous to human health and many soldiers have actually fainted or reported constant dizziness during the said process.

The systems that the Army tested mainly consisted of automated pneumatic air brush systems that move back and forth in the barrel without any involvement of human hands. These systems were tested also using foam as a cleaning agent that gave remarkable cleaning results. Some locally made systems by NUST etc) were also tested and few of them were employed on cleaning tank barrels. However the locally made systems essentially used crude technology but were preferred because of the very cheap prices. The cleaning results of the locally made systems were not very encouraging.

The foreign systems tested were from MILFOAM (Finland) and NIEBLING (Germany). Despite advancement of technology in this area, Pakistan Army unfortunately is still marred with the age old manual cleaning system for almost all of its large barrels!
 
The foreign systems tested were tank These systems were Tank Cleaning tested also using foam as a cleaning agent that gave remarkable cleaning results.I went to the tank tuning guy he k asp k Karloff service kit and tank
 
Hello, MILFOAM (Finland) and NIEBLING (Germany). These are very expensive items, and not only that you have to keep buying there solvents as well. In this day and age there are better technologies available, to clean barrels at a fraction of the cost these companies charge you. You dont need to use toxic chemicals any longer. For a 120mm tabk cleaning system complete ready to go costs s$6000.00 and that includes everything but the One Man to operate it......
 
:O Really !

I can design a better one. Will the Army purchase via clean process ?
 
Designing and putting into service are two different things... having the credibility and reliability are the key point to anything worthwhile...
Barrel-Cleaning.png
 
Designing and putting into service are two different things... having the credibility and reliability are the key point to anything worthwhile...

Engineering as we practice it means durability and reliability is by design.
 
Best way would be to dress Zarvan like a fairy and make him crawl through the barrel. Once done, shoot it while he's still in there..... this will oil it as well! :whistle:
 

Pakistan Affairs Latest Posts

Back
Top Bottom