What's new

Direct shipping from Bangladesh is better than third-country EXIM cargo

Bilal9

ELITE MEMBER
Joined
Feb 4, 2014
Messages
26,569
Reaction score
9
Country
Bangladesh
Location
United States

Bangladesh is making steady progress in direct shipping. At this point, the country should augment and expand the present initiative of direct shipping and take adequate measures to make Matarbari Deep Sea Port a hub of international shipping for transhipment​


Direct shipping from Bangladesh has benefitted businesses with reduced cost, cutting the voyage time and instilled confidence in MLOs and shipping agents. Photo: TBS
Direct shipping from Bangladesh has benefitted businesses with reduced cost, cutting the voyage time and instilled confidence in MLOs and shipping agents. Photo: TBS

Direct shipping from Bangladesh has benefitted businesses with reduced cost, cutting the voyage time and instilled confidence in MLOs and shipping agents. Photo: TBS

After the settlement of maritime boundary delimitation in the International Tribunal for Law of the Sea in 2014, India has been engaging with Bangladesh to promote and protect mutual interests in the maritime domain.

The two countries have signed Coastal Shipping Agreement in 2015, the Protocol on Inland Water Transit and Trade 2015 and the Agreement on the use of the Chattogram and Mongla Ports (ACMP) in 2018, for the movement of goods to and from India. To fully operationalise the ACMP, India piloted the first of four trial runs on the Mongla-Tamabil and Mongla -Bibirbazar routes in August 2022.

Welcoming the successful transit trials, India looked forward to their full operationalisation and reiterated to work towards the expansion of the bilateral Coastal Shipping Agreement to include third-country EXIM cargo. (Note: EXIM Cargo means any loose cargo/bulk cargo/liquid cargo/break-bulk cargo/containerised cargo bound for export and import).

According to Load Star online on 12 September, 2022, "Bangladeshi businesses applauded the Indian offer as it will facilitate their EXIM trade significantly, enabling them to send and receive cargo while avoiding the Chattogram Port, which often faces congestion."

Actually, one will need time to recollect when Chattogram Port (CP) had congestion the last time. The CP handled 70.630 million tons of cargo and 2.258 million TEUs (twenty-foot equivalent, a unit of cargo capacity) of container in 2015-2016; 117.383 million tons of cargo and 3.230 million ton TEUs of container in 2021-2022.

The ship turnaround time reduced to 2.43 days in 2021-2022 from 4.70 in 2015-2016. Construction of the Patenga Container Terminal has increased container handling capacity by 2.37 million TEUs.

The Bay Terminal will increase cargo and container handling capacity by 5 million tons and 3.08 million TEUs respectively. With capacity growth and efficiency, CP's global ranking was 64th in 2021.

Besides the CP, the Mongla Port (MP) is coming back to life after decades of low-level activities. In 2015-2016, MP handled 5.798 million tons of cargo, 25,597 TEUs containers and 14,969 cars.

In 2020-2021, it handled 11.945 million tons of cargo, 29,785 TEUs containers and 14,474 cars. With the inauguration of the Padma Bridge, car handling jumped to 20,009 till May 2021-2022 and the ship turnaround time reduced to 3.68 days in 2021-2022 from 4.89 in 2015-2016.

Besides expanding the capacities of the two seaports, the government is building Bangladesh's deep sea port at Matarbari in Cox's Bazar district. Construction of large-scale facilities will enable mother vessels to dock at Matarbari and reduce dependence on 'third-country EXIM'. This deep sea port has great potential to emerge as a new international hub for transhipment.

Bangladesh's exports and imports have been third-country dependent. Feeder vessels transport goods to a third-country port where goods or containers are on-boarded mother vessels sailing for destination ports across the continents. A reverse procedure is followed for imports i.e mother vessels discharge imported goods at the third-country port where from the feeder vessels transport goods to CP or MP.

Third-country EXIM cargoes are prone to both man-made and natural risks. In April 2021, over 25,000 imported containerised goods were stuck due to the pandemic, in the seaports of Sri Lanka, Singapore, and Malaysia, thus holding up or slowing down industries due to raw material shortages.

Exporters feared missing shipment deadlines, especially the fashion industry's fast-moving consumer goods.

From an international trade perspective, direct shipping is preferred to third-country EXIM. At the backdrop of the crisis of April 2021, Chattogram Port Authority (CPA) took the initiative and made direct shipment of 952 TEUs containers from Chattogram to Ravenna Port in Italy in February 2022, which reached in 16 days.

The learning curve grew over the next couple of months. CPA with the cooperation of Main Line Operators (MLOs) and Shipping Agents has successfully launched direct shipping services to seven of its 20 major routes. It is also working to launch direct shipping to Portugal, Slovenia, Thailand and the Middle East.

Direct shipping has benefited businesses with reduced cost, cutting the voyage time and most importantly, instilled confidence in MLOs and Shipping Agents about the potential of direct shipping from Bangladesh.

Direct shipment has halved the voyage time and cut shipping costs by 40%. All European destinations are being connected to direct shipping routes. For example, container services from the Koper Port in Slovenia are connected to Austria, Slovakia, Hungary, Poland, Italy, Germany, Croatia, Bosnia and Herzegovina, and Serbia. Also, the CPA held a meeting with the Slovenian delegation on 21 June 2022.

Bangladesh presently uses three ports for EXIM cargoes. These are the ports of Singapore, Colombo or Hambantota and Port Klang. These ports have a proven track record of being an international hub for transhipment.

India's offer will be the fourth 'third-country EXIM port' for Bangladesh. Bangladesh Foreign Trade Institute (BFTI) conducted a feasibility study on the proposal which recommended that the proposed routes through the Vishakhapatnam, Krishnapatnam, Kolkata and Haldia ports in India are not commercially viable.

Kolkata and Haldia Port suffer from low draught and cannot berth large vessels. Vishakhapatnam and Krishnapatnam handle mother vessels destined for Malaysia, China and South Korea. Vessels from these two ports do not go directly to the US and European destinations. Exports from these ports to the US and Europe are transported to the ports of Singapore/Colombo/Port Klang and transhipped from there. Ports of Vishakhapatnam and Krishnapatnam may exercise an option, i.e transporting Bangladesh's EXIM cargoes over land to a port on India's west coast, say Jawaharlal Nehru Port Trust, Mumbai, and tranship from there.

Anyway, third-country EXIM through Indian territory will add one or more layers to Bangladesh's export and import, increasing voyage time, freight costs, insurance costs, port handling charges etc and adding more man-made and natural risks.

Bangladesh is making steady progress in direct shipping. The development of Matarbari Deep Sea Port has the potential to berth vessels of 18-meter draft. At this point, Bangladesh should augment and expand the present initiative of direct shipping and take adequate measures to make Matarbari Deep Sea Port a hub of international shipping for transhipment.


Sketch: TBS
Sketch: TBS

Sketch: TBS
Mohammad Abdur Razzak, a retired Commodore of Bangladesh Navy, is a security analyst.
 
.
BD should expand its maritime fleet and primarily service its trade logistics itself. The cost of doing it may not be more as we are having to pay the likes of colombo for using their ports.

India proposals are laughable.
 
.
BD should expand its maritime fleet and primarily service its trade logistics itself. The cost of doing it may not be more as we are having to pay the likes of colombo for using their ports.

India proposals are laughable.

My thoughts exactly. While expanding our maritime fleet, we should buy new technology low-draft vessels (see below) convenient for Bangladesh low draft container ports like Chittagong, Payra and Mongla which have seen both capital dredging activity and massive purchases of new Quayside Gantry cranes, straddle carriers and reach stackers of late.

If we can accommodate 200 meter long 60,000 ton ships in CTG port terminals (10 meter draft was just made possible because of capital dredging there) then that makes possible direct shipping to ports like NYC, Rotterdam and Hamburg and anything in between. Of course - Matarbari Container Port is coming up which will have a draft of 18 to 20 meters which is deeper than a lot of ports in the region. Chittagong will have some more capital dredging done and then it can handle Panamax type cargo ships at some point (12m draft). Matarbari of course can handle NeoPanamax class ships (15+ meter draft).

Tsuneishi shipbuilding in Japan has introduced the Chittagong Max as a low draft design (11m draft) , we should license the design or have it built at one of their yards in the Philippines or even in Bangladesh at some point. This ship can go to major EU ports easily, and maybe even to US Eastern ports, instead of wasting weeks with containers sitting in S'pore or Colombo waiting for the next available mega container carrier.

BTW the length limit allowed in Chittagong port is no longer 186 meters, as 200 meter long vessels have started docking there already.


-------------------------------------------------------------------------------------------------------------------------------------------

KAMSARMAXBC

TSUNEISHI’s Chittagong Max is the largest class among the category​

The ship is designed to enter the Chittagong Port in Bangladesh with the largest class of loading capacity of 2,806 TEU. It is also equipped with the specifications such as deck cranes and extra reefer containers sockets that are required for the trading in developing Asian countries. The success of this ship design has earned a substantial number of orders.

Fuel efficiency and environmental performance​

  • ・Comply with EEDI Phase 3 regulations.
  • ・The unique hull form, which reduces resistance, is paired with our exclusive fuel-efficiency technologies to improve the ship’s performance.
  • ・Equipped with the environmental technologies devices to prevent the air pollution from the NOx and SOx emissions and marine pollution from the oil spillages, etc.
top_photo.png

  • Energy saving device MT-FAST
  • Energy saving propeller TOP-GR

Versatility​

  • A wide beam with 186m LOA ship type that meets the port restriction conditions of Chittagong.
  • ・Equipped with a total of 600 reefer container sockets on the upper deck and cargo holds.
  • ・Pallet-wide containers can be loaded on the upper deck.
  • ・Cargo holds can also load dangerous cargo containers.
  • ・Equipped with three deck cranes, make it possible to handle cargo at many ports.
  • ・The accommodation house is located at the stern end. This allows the crane to move smoothly and faster in loading / discharging operation.
photo01.png

Loading performance​

  • The ship is designed with wider breadth to increase the full container load with maximum container loading capacity of 2,806TEU, the largest class of Chittagong Max.

  • list_photo01.jpg
    list_photo02.jpg
 
Last edited:
.
Tsuneishi has a shipyard in China too, Tsuneishi Group (Zhoushan).


A recent build of this design from this yard is the Maersk Songkhla,

showphoto.aspx


3173538.jpg
 
.
Back
Top Bottom